Latest pcc lining Tenders | Government pcc lining Tenders

State Government

CTN :39685176

27 Mar, 2025 34.67 Crore

Parbhani - Maharashtra

Tender For construction of balance work of majalgoan loni sawangi lift scheme tq. majalagaon dist. beed such as c.c. lining to canal, structure on canal and bituminous road along with raising main and canal side etc.

CTN :39769623

27 Mar, 2025 1.74 Crore

Wardha - Maharashtra

Tender For strengthening of takli (d) distributary and lining work at necessary places as well as deepening of escape drain at r.d.6250 m and construction of crossing bridge over it and lining work at r.d. 900 to 1130 m of nimsada minor to prevent sepages.

State Government

CTN :39760120

20 Mar, 2025 181.05 Crore

Biharsharif - Bihar

Tender For restoration and lining work of mirjain canal system (0.00 km to 28.2 km),originating from wajidpur, bergain distributary (0.00 km to 11.5 km),teusain branch canal (0.00 km to 8.00 km ) originating from 10.00 km of mirjain distributary and onama distributary (0.00 km to 12.00 km )originating from 6.5 km of bergain distributary?.

corporations/Associations/Others

CTN :39759498

07 Apr, 2025 19.84 Lacs

Multi City - Gujarat

Tender For design, supply, installation, testing & commissioning of mechanical equipment at bhobha mps 1-, submersible sewage non-clog vertical pump, , ms pipe :-, , lowering, laying, jointing & welding in position to correct line & level m.s. pipe with outer gunniting & inside lining/epoxy painting on pedestal or chairs upon prepared formation or prepared bedding in trenches the rates include conveyance from store to site of work loading, unloading, joint plastering, hydrotesting etc.complete, , sluicevalve, , refluxvalve, , lowering,layingandjointinginpositionfollowingc.i/d.frefluxvalves,butterflyvalves,sluicevalvesandairvalveincludingcostoflabour,jointing,material,includingnutboltsandgivingsatisfoctoryhydraulicstesting etc complete:- for sluive valve & nrv, , expansionbellows, , pressureguage, , ultrasonic type level transmitter with integral display, , sitcoflvmccpaneltotallyenclosed,dust&berminproof,indoortype,minimumdegreeofprotection-ip52asperis:2147,operationon3-phase,4wire,415v,50hz,neutraleffectivelygrounded,withinstrumentationcompartmentsaccomodatingledtypeindicatinglamps,controlcontactorsasperis:13947,ctofaccuracyclass-iasperis:2705,relays,meters&controlmcbs,airinsulatedelectroliticgradealuminumbusbarforthreephase&neutralsystemwithincommingbreaker-microprocessorbasedaircircuitbreakers(electricallyoperateddrawouttype)/airbreakfixedtypemccbwithtripfreemechanism,currentlimitingtypeasperis:8828,motorcontractor(aspertype-2coordination),overloadrelaywithbuilt-insinglephasingpreventionfeature&auxiliaryfeedersasperslddrawings,momentarycontacttypepushbuttons,equipmentfittings,busbars,cableboxes,cablegland,incoming&ougoingcableconnectionfor1100vgrade,aluminium/copperconductorxlpe/pvcinsulated&pvcsheathedarmouredcable,10%spareterminals,powerwiringusing1100vgrade,frlsinsulatedcopperconductorwiresconformingtois:694&8130,cablecompartments/alleysofminimum300mmsize,gi/alearthbusbarforentirelength.mccshallbefabricatedfromcoldrolled,coledannealed(crca)sheetsteel&minimumthicknessofvariousmembersshallbeasfollows:baseframe/channel/glandplate:3mm,loadbearingmembers/doors:2mmandinternalpartitions: 1.6 mm. microprocessor based soft starter with built-in by pass contactor,semiconductorfuses,harmonicfilters,castresintypect,digitalmfm,analogueammeter&minimum10channeltemperaturescanner with rs 485 communication port - 75 kw, ,

corporations/Associations/Others

CTN :39689206

02 Apr, 2025 NA

Raigarh - Chhattisgarh

Tender For supply work of d.i. pipe and fitting material-, 80 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 100 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 150 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 200 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 250 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 300 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 350 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 400 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 450 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , ng and laying including testing ductile pn 16 type iron flanged spigot conformim :9523/2000 in the following nominal diameter/sizes with external bitumen coa g as per clause 13 of is: 9523/2000. , 80 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 100 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 150 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 200 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 250 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 300 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 350 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 400 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 450 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 30 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 100 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 50 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 200 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 250 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 200 mm d.i. elbow (k-7) (kirloskar, kartar, karan), 100 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , le iron double socket 45" bends conforming to 15: 9523/2000 having dimension as per table nal diameter/sizes with external bitumen coating and internal cement mortar lining. , 80 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 100 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , e iron double socket 90 bends conforming to is: 9523/2000 having dimension as per table mal diameter/sizes with external bitumen coating andinternal cement mortar lining. , 80 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 100 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 80 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 100 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 150 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 200 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 250 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 300 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 80 mm d.1. tail piece (k-7) (kirloskar, kartar, karan) , 100 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 150 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 200 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 250 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 300 mm. d.i. tail piece (k-7) (kirloskar, kartar, karan) , 80 mm d.i. dummy end cap isi mark (according to sample). , 100 mm d.i. dummy end cap isi mark (according to sample) , 150 mm d.i. dummy end cap isi mark (according to sample) , 200 mm r.l. rummy fod can 151 mark laccording to sample), ??????? ?? ????? , 150 mm d.i. rubber ring isi mark heavy (according to sample) , 200 mm d.i. rubber ring isi mark heavy (according to sample) , 250 mm d.i. rubber ring isi mark heavy (according to sample) , 300 mm

State Government

CTN :39727613

25 Mar, 2025 47.50 Lacs

Bharuch - Gujarat

Tender For annual repair lining & coating work in various plants at gnfc tdi-ii dahej- 2025

State Government

CTN :39712193

25 Mar, 2025 NA

Hyderabad - Telangana

Tender For supply and fixing of the acoustic lining work detailed below in annexure duly dismantling and lifting of debris of existing acoustic insulation and aluminum thermal insulation of air-cooling system, b-block, vidyut soudha hyderabad

State Government

CTN :39712194

25 Mar, 2025 NA

Hyderabad - Telangana

Tender For supply and fixing of the acoustic lining work detailed below in annexure duly dismantling and lifting of debris of existing acoustic insulation and aluminum thermal insulation of air-cooling system, b-block, vidyut soudha hyderabad

CTN :39678292

27 Mar, 2025 7.13 Crore

Rajnandgaon - Chhattisgarh

Tender For c.c. lining work in right bank canal from rd 0 to 7775m, 30 no. colaba pipe fixing and 10 no. outlet construction of mongra barrage project in block ambagarh chowki district rajnandgaon (present mohla manpur ambagarh chowki)

CTN :39740241

07 Apr, 2025 1.76 Crore

Karnal - Haryana

Tender For strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb - [10.33.1]providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1. 1:4 (1 cement : 4 coarse sand) [through rate], [10.8]providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [through rate], [11.25.2]pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 2. raised and cut pointing [through rate], [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [through rate], [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [through rate], [11.61.1]white washing with lime to give an even shade : 1. new work (three or more coats) [through rate], [14.23.1]cement pointing 1:2 on lining 1. in bed. [through rate], [17.15.1]granular sub-base with coarse graded material - grading-i or ii or iii (table:- 400-2) construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of mortandh specifications 1. grading i material [through rate], [17.22.2]water bound macadam gr i 2. water bound macadam grading i with screening type a providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.23.2]water bound macadam grading - ii 2. water bound macadam (53mm to 22.4 mm)grading ii with screenings type b (11.2 mm aggregates) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.25.1]prime coat @ 0.85kg per sqm 1. prime coat @ 0.60kg per sqm providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of mort&h specifications [through rate], [17.26.2]tack coat 2. providing and applying tack coat with penetration grade bitumen vg - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of mort&h specifications [through rate], [17.33.1]open - graded premix surfacing 20 mm thickness 1. providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder vg - 10 @ 1.46 kg per sqm, laid with paver finisher mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of mort&h specifications. [through rate], [17.36.3]seal coat 3. type b with vg - 10 bituminous binder providi

Pcc Lining Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government