Latest pe coating Tenders | Government pe coating Tenders

Corporations And Associations And Others

CTN :35500614

24 Jun, 2024 NA

Delhi - Delhi

Tender For corrigendum : tender for the supplies of drugs and pharmaceuticals, labchemicals, x ray films and chemicals, surgicalsutures and dressings, vaccines, sera etc. and general items for the year 2023 25. - flexible soft mask for oxygen therapy: mask is to be designed for convenient oxygen therapy. manufactured from non-toxic medical grade pvc. to be provided with adjustable strap for proper positioning of mask on the nasal area. swivel connector for convenience of attachment to the oxygen tube. 200 to 210cm (app 7ft) multichannel tube is provided to ensure continuous flow of oxygen even if tube is accidentally kinked. proximal end of tube is fitted with soft funnel shape connector for easy connection to oxygen source.adult & child size individually packed in poly bag, solution: 0.55% orthophthaldehyde for rapid high level disinfection , entral feeding bag : 1.2 liter (approximate) capacity bag. ice pouch with bag for preserving food longer. feed transfer set directly connectd to the bag. hanger for the bag for suspending the bag from height (approxmiate 36 inch ). peel pack with fine regulation of flow device ,sterile ,single use, nasogastric tube--silicone: 100% base nasogastric tuble for entral feed - fg 12, 14, 16, infusion lipid : 20% lipid, breathing system--bipap /cpap: 22 f flixible fg port 1.6 meter smooth inner bore non collpasible wide bore tube with swivel 22m / 15f patient end , canula : 24 & 26 iv canula, adva needle technology, infusion: 3 in 1 combo parentral pack,10% amino acids with electrolytes & 50% dextrose with 20% fat emulsion, sodalime usp: 3 mm strands of sodalime as per usp, with pink to violet colour change with exhustion of co2 absorption power, the strands hsould co2 abosrpiton power of 19% and conforms to the moisture requirment of 12% to 19% range, it should comply with the hardness requirment of 75%, sodalime usp: 3 mm strands of sodalime as per usp, with pink to white colour change with exhustion of co2 absorption power, the strands hsould co2 abosrpiton power of 19% and conforms to the moisture requirment of 12 to 19% range, it should comply with the hardness requirment of 75% , ett for micro laryngeal surgery : 4,5 & 6mm used for vocal cord surgery the smaller diameter of tube allow the surgeon an easier view an access to vocal cord 22 mm standard female connector on both the ends with in a diameter of 15 mm elbow port for easy suctioning, sterile disposable, individualy pack, it should have low pressure large volume & large diameter cuff, enotracheal tube holder : adjustable straps latex material with integrated bite block with ett holding screw & band for fixation, inj: adrenaline 1 mg, breathing circuit holder: adult/paediatric breathing system tube support 30mm/22mm/15mm slots flexible neck, non disposable, 15inch length, pvc material , i.v. infusion set: advanced fluid administration system- protective cap with prime stop membrane, bacterial retention air vent & air stop- with 15 micron fluid filter in the chamber, medical grade, non-toxic dehp free transparent kink free tubing 180 cm , parking space in roller clamp., alcohol hand gel: alcohol hand gel: 80% w/v ethanol + emolients and alkonium compound , alcohol swab: alcohol swab (single use): paper based swab impregnated with alcohol sufficent to swab and sterilize vascular acess site. packed in puncture proof water proof peel pack, cannula -arterial cannula (single use), sw 20 , 22: arterial cannula (single use), sw 20 , 22,made of medical grade platsic with ptfe / teflon coating. over the needle type. fitted with flow swtich. port for connecting infusion bag, arterial pressure monitoring line. , inj: atracurium besylate 10 mg./ml, chemical indicator : autoclave chemical indicator bowie & dick test pack , autoclave indicator label: autoclave indicator label (single use): indicator label roll of approximate size of postage stamp, changes color with temperature over 120c when exposed to steam under high

Central Government/Public Sector

CTN :36194827

05 Jun, 2024 NA

Jorhat - Assam

Tender For supply of workshop fabrication items - ms angle 1" (tata)----, m.s angle 1"(tata)------, m.s square pipe-1" (heavy duty) nezone----, sheet cutter (xtrapower)--- 4", welding rod(555)--- 3.15mm, wood plank (khokon/koroi)-1" x 12"x10", wood plank (khokon/koroi)- 1" x 12" x 5', metal primer----, thinner, s.s. wood screw --- 1", paint brush 3", wheel shaft for bike tyre (big size heavy duty), wheel rim, bike tyre, bike tube---, bearing hub with (skf) bearing, ball bearing (skf)--, m.s angle 1" (best quality), m.s angle --1" (best quality), ms square pipe (nezone/tata/jindal)--- 1", ms square pipe (nezone/tata/jindal)--- %", ms round pipe(nezone/tata/jindal)----01", ms round pipe(nezone/tata/jindal)----1", ms flat bar-----1" (best quality), ms flat bar----1" (best quality), copper sheet 01 mm (8' x 4'), al sheet 1.2 mm (8' x 4'), s.s sheet (ss 304) 1.5 mm (8' x 4'), g.i sheet ---- 1.5 mm (08' x 04'), ms sheet----- 1.5 mm (08' x 04'), 1.5 mm gl perforated sheet (8' x 4'), 1.2 mm s.s perforated sheet (8' x 4'), m.s welding rod(555)--- 3.15 mm (90 no's), al gas welding rod, copper gas welding rod, s.s welding rod, fluxes for gas welding (borax), sheet cutter (xtrapower/hitachi/bosch)--04", wood plank (bonbogori/bonsum) 1.5" x 12" x 10', wood plank (bonbogori/bonsum) 3" x 12" x 10', wood plank (bonbogori/bonsum) 2" x 12" x 10', wood plank (bonbogori/bonsum)- 1" x 12" x 10', block board (waterproof) 1/2" x 4' x 8', block board (waterproof) 19 mm x 4' x 8', ply board (waterproof) 6 mm x 4" x 8', ply board (waterproof) 4 mm x 4" x 8', cupboard lock (godrej), nails (nva) 2", door magnetic stopper & holder, % inch star head screw (zinc coating & length 1"), hinge (kabja)-2", hinge (kabja)--3", l-hinges-06 mm, l-hinges 19 mm, aluminium tower bolt-03", aluminium tower bolt-04", 02" brass ball valve, 01" brass ball valve, 04" heavy duty wheel with brake, door handle-3", door handle-4", door handle-5", drawer channel 14", drill bit 2 mm, 03 mm, 04 mm, 05 mm, 06 mm (02 pkt of each), carbon brush (big), carbon brush (small), l-drop 10 inch, aluminium door lock, 02 inch screw (star head), 1.5 inch screw (star head), 02 inch plastic sleeve wall plug/pvc sleeve gitti, 1.5 inch plastic sleeve wall plug/pvc sleeve gitti, dendrite glue (fevicol) sr 998, fevicol 01 liter size, metal primer (red-oxide) 01 ltr size, wood primer(500 ml size x 20 no's), black enamel paint for metal 01 ltr size, enamel-smoke grey (01 ltr size), white colour (enamel) (01 ltr size), sanding paper (waterproof)-150 g, sanding paper (waterproof) 180g, sanding paper (waterproof) 220g, enamel-mint green, (01 ltr size), enamel-bus green, (01 ltr size), golden brown (enamel)., (01 ltr size), coffee brown colour, (01 ltr size), po red (asianpaints)(01 ltr size), yellow.colour, duco thinner, (01 ltr size), wild purple colour-, colour blue-, aluminium paint, wooden paint brush ---- 1", wooden paint brush 2", white colour mica tape, pencil brush, thinner (01 ltr size), m.s angle- 01 inch, anchor fastener (10 mm dia, length 04 inch), acp board, -(01 ltr size), (01 ltr size), (01 ltr size), 06 mm ply board -(8'x4'), 19 mm block board (8' x 4'), high glossy sunmica (colour)--(8'x4'), off white sunmica---(8'x4'), drawer channel - 18", cupboard lock, cupboard handel--- 6", l-hinges-19 mm, l- hinges-06 mm, 3/4 inch screw, magnet lock, mica tap, fevicol (01 ltr size), wood plank -(3' x 12' x 10'), wood plank (6" x 6" x 6"), wood plank (02' x 12" x 10'), 19 mm water proof block board (8' x 4"), 12 mm water proof block board (8' x 4"), 06 mm water proof ply board (8 x 4"), 04 mm teak ply (8' x 4') (best quality), glossy sunmica (8' x 4'), sunmica (off white) -8' x 4', high glossy laminated pvc sheet (8'x4') (white colour), 32 density pu foam (thickness--2 inch) (3' x 6'), sofa fabric (sofa cloth), electric screw driver (bosch), fevicol (01 ltr size) (01x60 ltr), dendrite (01 ltr size) (01x5 ltr), office chair tilt control plate (hydraulic chair lift mechanism), heavy metal hydraulic pump s

Central Government / Public Sector

CTN :36176238

27 May, 2024 16.72 Lacs

Haldia - West Bengal

Tender For custom bid for services - hitsk24061 thermography of instrument panels equipments at haldia refinery - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, materials for secured advance, civil items, a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., contd2, : 2 :, electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., contd3, : 3 :, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss / copper tubes, 2. ss ? brass compression fittings,

Central Government/Public Sector

CTN :36174519

10 Jun, 2024 NA

Mughalsarai - Uttar Pradesh

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesive on other si de. [ warranty period: 30 months after the date of delivery ] csd/trs/ddu, ecr

Central Government/Public Sector

CTN :36170847

06 Jun, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesive on other si de.size 8" width & 20 mts long in roll as per specification. (a) total thickness : 0.3 +/- 0.08 mm. (b) tensile streng th kg/2.5 cm : 35kg/2.5 cm,min. (is-7809 or latest) (c) elongation % : 5% min (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5cm, min. (is-7809 or latest) : (e) water permeability : not more than two drops after t wo hours for non- adhesive backing. (f) oil resistance : passes the test (g) alkali resistance : passes the test (h ) weathering resistance : no cracking should be observed on the coated surface when exposed for 200 hrs. (a) length : 20 mts (b) width : 8 inch [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :36157203

14 May, 2024 NA

Multi City - Bihar

Tender For supply of single coated glass cloth with special water proof coating one side andadhesive on other side [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :36128650

25 Jun, 2024 NA

Kanakapura - Karnataka

Tender For supply of steel sheet of size 15x2500x6400mm., as per drawing: din en 10025-5 s355 j2w+n. sp ecification for ultrasonic testing of steel plates shall be astm-a-578(reapproved 20 01). the acceptance standard shall be "level b" (para 8 of astm-a-578) with frequency 100% (all the plates shall be ut testing),scanning shall be continuous over 100% of p late surface., packing instruction: mild / corten/ en steel coils, sheets and plates:- (a) mil d, en and corten steel sheets in coil form. the coil shall be protected in reasonabl y good condition to withstand normal handling hazard during transit with the fol lowing provision as the barest minimum: i) the whole coil should be wrapped with do uble layer of water proof paper and a biodegradeable plastic sheet of suitable thi ckness. ii) the inner edge of the coil should be protected by gi ring followed by an other iron ring. iii) outer edge of the coil should be wrapped with gi ring. iv) coil sh ould be securely strapped with minium 5 steel bands through the eyes of the coil a nd minium 3 steel bands on the circumference of the eye. v) hot rolled coils shall b e supplied with rust preventive oil coating on the outer layer, inner layer and on t he both edges. vi) coils processed through pickling and or skin passing or cold ro lling of thickness upto 2mm shall be protected against corrosion and rust by coat ing corrosion preventive fluid, soft film, solvent deposited, waterdisplacing to is: 1154 . vii) whole coil should be mounted on wooden blocks for easy lifting/ stacking. viii) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes ix) the sheets in c oil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) mild, en and corten steel plates/she ets. i) plates above 5mm shall be supplied with reasonable packing with metal strapi ng for handling during transit and storage. ii) the sheets/plates shall be supplied i n bundles with double layer of water proof paper & a biodegradeable plastic shee t of suitable thickness and metal protection in edges.all the sheets upto 2mm thck ness shall be protected against corrosion and rust by coating corrosion prevent ive fluid, soft film, solvent deposited, waterdisplacing to is: 1154 and all the sheets/ plates above 2mm shall be protected against corosion & rust with suitable mineral oil or other temporary rust preventive coating. iii) all bundles shall have a minimu m of 2 hoops upto 1.2 meter in length and one extra hoop for every additional mete r. the bundles shall also be provided with skid (wooden packing under neath) to fa cilitate handling. iv) optimum weight of the bundle should be 2mt+-10%. mechanical d amange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Pe Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector