Latest pet blowing machine Tenders | Government pet blowing machine Tenders

Central Government/Public Sector

CTN :41103581

12 Aug, 2025 NA

Kota - Rajasthan

Tender For supply of set of maintenance spares suitable for vr coating make airless spray painting equipment model-tiger 30.150 as per list attached.

corporations/Associations/Others

CTN :41014048

18 Jul, 2025 NA

Kolkata - West Bengal

Tender For instalatiopn of open air-gym equipment at ashapurna devi smriti uddyan at ward no-110 - supply and installation of pull chair dual/dual pull chair with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.all pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 700 x 2100 mm, supply and installation of leg press dual/ dual leg press station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 2300 x 500 x 1900 mm, supply and installation of air walker/air walker station with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from virgin -lldpe with any protection to infiltration of ultravioletray, possessing weather resistant property.uv-fully resistantall pipes are powder coated 80-120 microns thick akzonobel paintsplatforms-high strength punching plate with wavy and slip resistant surface.base plate- minimum 12mm thick mild steel.fasteners-stainless steel screws to be used and at the contact point with thecolumns, rubber pads are to be used. screw tops to be covered with plastic caps.suitable for user weight upto 150kgpipe covers-pipe ends covered with aluminium end.dimensions (lxwxh): 1100 x 550 x 1300mm, supply and installation of rower/rowing machine with necessary concreting work and cutting existing chequered tile pavement and resetting the same if necessary. specifications:material-galvanised steel pipe, cleaned by sand blasting, then coated with phosphatesolution and finished with electrostatic powder coating or other similaravailable material meeting the required standard.anti rust-shot blast/ grit blasting of equipment to clean the rust; electrostaticpower coating technique to process the surface.base cover made from

State Government

CTN :41031091

25 Jul, 2025 3.12 Lacs

Ropar - Punjab

Tender For purchase of football equipment - purchase of football equipment, football 4 no.pu) poly uritheen material international match standard (fifa,aiff) approved, football 5 no.pu) poly uritheen material international match standard (fifa,aiff) approved, goal post 11 x 115 inches circumference made of iron with height 2.44 meter and width 7.32 meters with white powder coating paint & wheel mounted portable., goal post 9 x 93 inches circumference made of iron with height 2.1 meter width 4.8 meter with white powder coating paint & wheel mounted portable., goal post 7 x 73 inches circumference made of iron with height 1.6 meters & width 3.6 meter with white powder coating paint & wheel mounted portable., shotting board woodenas per standard specification

State Government

CTN :40314448

22 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v

Central Government/Public Sector

CTN :41002591

29 Jul, 2025 78.08 Lacs

Hyderabad-T - Telangana

Tender For providing of operation and maintenance of other machines and plants - cleaning and anti corrosive coating of structural supports equipment pipelines cranes and busbars of zsp

Central Government/Public Sector

CTN :40996442

29 Jul, 2025 NA

Numaligarh - Assam

Tender For supply of deluge system equipment for msb unit for nrep - a. deluge water spray systems (mvws system + water curtain system + hvws system)cs deluge valve with dry pilot trim & electric release trim, horizontal inlet & horizontal outlet, without skid, ul/fm approved, complete with dry pilot trim with test, alarm & drain devices, local deluge valve control station (dvlcs) (1 no. per dv), pressure transmitters (02 nos per dv.), 3/3 way sil2 certified intrinsically safe solenoid valve-24v dc (1 no. per dv), pressure gauges (03 nos. per dv), air filetr regulator (afr)(1 no. per dv), air vessel of adequate capacity (1 no. per dv), etc. in compliance with the scheme shown in attached "technical data sheets for fire fighting & safety equipment (tk-1p21a-sa-dat-0001)".the deluge valves shall be supplied with the trim and associated instruments duly assemblied with the deluge valve and with suitable packaging to avoid damage during transportation. the upstream strainer, block valves and by-pass valve including the pipes connecting to these items are not in bidders scope of supply.all items shall be suitable and certified for zone 1,iic,t3 area classification. all electrical and instruments shall be certified for intrinsically safe (ex-ia) and solenoid valve shall be certified to explosion proof (ex-d). all instruments and enclosures (junction boxes/ cabinets/panels/ accessories) in field shall be dust proof and weather proof with ip-67., 200 mm nb, 150 mm nb, 100 mm nb, 80 mm nb, mvw spray nozzle with 1/2" mnpt end connection, moc - stainless steel, ul / fm listed, (with inbuilt strainer): size 15 nb, mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-41, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-79, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., quartzoid bulb detect

Central Government/Public Sector

CTN :40753552

16 Jul, 2025 78.08 Lacs

Hyderabad-T - Telangana

Tender For corrigendum : providing of operation and maintenance of other machines and plants - cleaning and anti corrosive coating of structural supports equipment pipelines cranes and busbars of zsp quantity: 1

Pet Blowing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector