Phase Tester Tenders

Get complete information related to latest Phase Tester Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Phase Tester Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Phase Tester Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :41333626

12 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen size 256 mm,

State Government

CTN :41333620

12 Aug, 2025 41.38 Lacs

Bikaner - Rajasthan

Tender For purchase of various testing general apparatus (lab equipment) in quality control labs for all zone - flash and fire point apparatus: supply , installation & commissioning of pensky-martens closed & open tester electric operated apparatus for determination of flash & fire point of tar & bituminous material as per is:1209-2021 using method a,b & c . the complete apparatus and its accessories shall be supplied, which shall confirm as per is:1448 (part-21) -2012 /iso 2719-2002 & is: 1448 (part-66)-1969 (reaffirmed 2003) and the complete item shall be supplied as per direction of engineer in charge . the appartaus shall include :-brass or copper test cup capacity 50 ml. with tight fitting lid. stirring mechanism (motorized), flame application device with shutter , electrically heated base with adjustable heating rate (1 - 6 c per minute) , standard thermometer (0 to 370 c) , heavy duty stand with insulated housing with 3.0 metre power cord & power plug etc complete. rates are inlusive of all taxes ., vibrating machine with 7.06 cmx7.06 cm x7.06 cm cube moulds :-supplying , fixing and commissioning electric operated vibrating machine with mould confirming to is: 10080-1985 (reaffirmed 2004) which shall be capable for compaction of cement mortar cube required as per is:4031. the complete frame assembly shall consist of device to hold a 7.06 cm mould to feed the sample in a mould. vibrator shall be mounted over coiled spring to carry the cube mould and vibrations are developed by mean of a revolving eccentric shaft. instrument shall be fitted with belt guard. electric motor of any reputed company is driven by an endless belt running on a crowned pully on the vibrating machine. digital time shall be also be fitted with digital timer and switch for ease of operation.main key features & technical specification of machine & accessories shall be as under :-- frequency of vibration :- 12000 + 400 rpm- power supply :- 230 v , 50 hz , ac supply single phase- motor capacity :- min. 3/4 hp , 2800 rpm- cube mould for cement (6 nos with base plates ) :- as per is:10080, size 7.06 cm x 7.06 cm , weight of mould shall be 2.8 + 0.2 kg of msinstrument supply shall include standard sand gr.-i, ii & iii , cube mould , poking rod , mortar mixing plate , suitable power cord min. 3.0 mtr long with power plug etc. the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., vicat needle apparatus :-supply of vicat apparatus complete set confirming to is:5513-1996 suitable for determining the consistency, setting time , soundness of cement & standard consistency as per is 4031. the apparatus shall consist of a metallic frame with movable rod carrying interchangeable attatchments , consistency plunger (polished brass having dia 10 + 0.05 mm, length 50 + 1 mm with lower edge flat) initial setting needle (dia 1.13 + 0.05 mm ) final setting needle (with annular collar ) and a conical mould (top diameter 70 0.5 mm, bottom diameter 80 0.5 mm, height 40 0.5 mm.) . the plunger assembly shall allow free vertical movement and include a graduated scale for measuring penetration depth . the apparatus shall be supplied with a glass base plate.apparatus shall include , gauging trowel, stopwatch, all accessories shall be supplied in a protective box and as per direction of engineer in charge .rates are inlusive of all taxes ., gi sieve set 45 cm.dia with lid & pan (complete set) :-supply of is sieve set for coarse aggregate having dia of 45cm made of gi sheet with seamless welding. each sieve should having rounded edges at top for safe operation. each sieve must be of tight fitting to each other. sieves set finishing & sizes shall comply is 460-2020 and as per direction of engineer in charge.rates are inlusive of all taxes . each set consists followings :-125mm, 100mm, 90mm, 80mm, 75mm, 63mm, 53mm, 50mm, 45mm, 40mm, 37.5mm, 31.5mm, 26.50mm, 25mm, 22.40mm, 20mm, 19mm, 16m

State Government

CTN :41337817

21 Aug, 2025 NA

Champaran - Bihar

Tender For supply of 2025 electronics engineering and electrical engineering -0 trainer kit for fm modulator using ic 566, trainer kit for generation and detection of pam, pwm, & ppm, trainer kit for pcm, dpcm, dm & adm, fhss & dsss trainer kit, qpsk & qam trainer kit, trainer kit for fm demodulator using ic 565, super heterodyne am receiver, galvanometer with stand, galvanometer with stand, potentiometer, dc potentiometer, kalvin bridge, wine bridge, hays bridge, anderson's bridge maxwell bridge, schering's bridge, strain gauge kit, lvdt kit, rtd, thermistor kit, electronics workbench, analog ic tester, ic: 555, ic: 741, ic: lf 398, ic: 74ls373, ic: lm565, ic: tl084, ic: xr2206, ic: lm324, 100mhz dual channel digital storage oscilloscope, , breadboard, function generator, digital multimeter, d.c regulated power, lcr/q meter, synchroscope, megger, phase tester, digital insulation tester, microprocessor 8085 trainer kä, microcontroller 8051 trainer ki, 7-segment led display, trainer kit for stepper motor, current transformer, potential transformer, tachometer, pn junction diode characteristic kit, transistor characteristic kit, scr characteristics kit, zener diode vi characteristics apparatus (forward & reverse)

CTN :41315387

14 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of acceptance code for gear units -- part 1: test code for airborne sound, mechanical vibration measurement and evaluation of machine, vibration part 9: gear units, information security, cybersecurity and privacy protection guidance on managing information security risks, electron and laser-beam welded joints --requirements and recommmendations on quality levels for imperfections -- part 1: steel, nickel, timtanium and their alloys., destructive tests on welds in metallic materials - hardness testing of narrow joints welded by laser and electron beam (vickers and knoop hardness tests), welding -- imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -- terminology, specification and qualification of welding procedures for metallic materials, welding procedure specification -- part 4: laser beam welding, specification and qualification of welding procedures for metallic, materials -- welding procedure test -- part 11: electron and laser beam welding, welding -- recommendations for welding of metallic materials, part 6: laser beam welding, safety of machinery - laser, processing machinespart 1:laser safety requirements, terms & definitions, geometrical product specifications and qualty tolerances thermal cuts, specifically focusing on laser cutting of materials with thickness up to 15mm., basics of general tolerance standard-iso, acceptance tests for nd:yag laser beam welding machines, machines with optical fibre delivery -- part 1: laser assembly, acceptance tests for nd:yag laser beam welding machines --machines with optical fibre delivery -- part 2: moving mechanism