Get complete information related to latest Piling Work Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Piling Work Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Piling Work Tenders.
Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c
Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in
Tender For corrigendum : supply of ml for brick block masonry work : :-- excavation work qty six point six cm x fifty cm x forty four mtrs for side foundation size forteen mtrs x eight mtrs , ml for brick block masonry work twenty cm x 45 cm for foundation wall plinth level , ml forms square tube frame work seventy five mm x seventy five mm for pillar and fifty mm x fifty mm x sixteen guage , sf pre caoted roof sheet 0 point 5 mm thick fixing with tapping scres 2 total 1288 sqft , ml for pcc plaster of cement concrete work with using twenty poing twenty five mm aggregate hundred mm thich with soomth finish area forteen mtr x eight mtrs x one point ten mtr
Tender For corrigendum : 1) design, supply, foundation, installation, testing , commissioning training and proving out of hydraulic c frame press machine -100ton capacity along with warranty(warranty includes preventive maintenance schedule (pms) 8 quarters as per the format enclosed as per annexure b) as per the technical specification annexure a enclosed.2) comprehensive annual maintenance contract for 05 years as per enclosed in annexure-c(camc), after completion of machine warranty period.
Tender For workdesign, supply, foundation, erection, testing and commissioning of 04 nos 32mtr stadium mast with fixed head frame suitable to carry 24 nos 1000w led each pole (at appropriate beam angle) flood light along with led video display in rajendra stadium, chapra, saran