Get complete information related to latest Pipe Bracket Gasket Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pipe Bracket Gasket Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pipe Bracket Gasket Tenders.
Tender For annual repair and maintenance of 500 mm dia di pipeline from kharkai to turamdih : : - patrolling or inspection of di pipe line for checking leakage detecting from intake well cum pump house to turamdih area where pipe line exists with technical persons minimum one fitter with transport facility daily and including tightening of nuts and bolts where ever required for rectification of leakages observed during routine inspection. , attending as and when required major breakdown or rectifying leakage of di pipe line including fixing of necessary mechanical joint and all accessary within twelve hours information or notice for rectification till the resumption of the service including labour charges equipment tools and tackles but excluding cost of materials etc , overhauling charges of valves including change of gland packing if required with all labour charges for joints for following sizes of gate or sluice valve or butterfly valves for four hundred mm dia , overhauling charges of valves including change of gland packing if required with all labour charges for joints etc for following sizes of gate or sluice valve or butterfly valves for five hundred mm dia. , repairing of air valves including charges of float ball with all labour charges tools and tackles , earth work in excavation in trenches or drains including dressing saides and ramming of bottoms lift upto one point five metre including getting out the excavated soil and disposal of surplus excavated soil as directed all kinds of soil , return earth filling by available excavated earth excluding rock i trenches plinth sides of foundation etc in layers not exceeding twenty cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto fifty metre and lift upto one point five metre complete as directed by the eic. , clearing jungle including uprooting of rank vegetation grass bush wood trees and saplings of girth upto thirty cm measured height of one metre above ground level and removal of rubbishe upto a distance of fifty metre outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and in equalities not exceeding fifteen cm deep and disposal rubbish lead upto fifty metre and lift upto one point five metrea all kinds of soil. , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete , providing and laying in position cement concrete of specifieda grade excluding the cost of centering and shuttering all work up to plinth level one cement isto three coarse sand six graded stone aggregate twenty mm nominal size. , rcc work below and above plinth level up to floor five level one cement isto one point five coarse sand isto three graded stone aggegate twenty mm nominal size is to be provided. , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete. , centering and shuttering including strutting propping and removal of form for all heights. , 15mm thick cement plaster on rough side of single or half bricke wall of mix one cement isto six coarse sand to be provided. , neat cement punning , supply at site laying jointing including gasket nut bolts all complete miscellaneous di fittings like di bend mechanical joint tee gland packing all item as per is9523 for four hundred or five hundred mm dia di specials with spigot and flange combination like bend tee of class k12 suitable for push on jointing as per is9523 pipe all complete.
Tender For procurement of various packing and sealing materials required for high-pressure valves for unit -3 aoh ntps 210 mw boilers. - seal r ing grafoi l of size 392 x 312 x 50 mm to wi thstand temperature upto560 deg. c & pressure160 kg/sq. cm, gasket & packing-pre-cut<>seal ring<>asbestos metallic<>circular<>265 x 330 x 40 mm to wi thstand temperature up to 560 deg. c & pressure160 kg/sq. cm, seal r ing grafoi l of size 200x158.4x29 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, seal r ing grafoi l of size 170x136x21 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, seal r ing grafoi l of size 150x120x20mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/ cm2, gland packing r ing size 96 x 70 x 13 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/cm2, gland packing r ing size 64 x 44 x 10 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/cm2, gland packing r ing size 60 x 80 x 10 mm to wi thstand, temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing r ing size 60 x 40 x 10 mm to wi thstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing r ing size 56x28x14 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing ring size 41x17x11.5 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size 64x50x5 mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq.cm, spiral wound metallic gasket size60x40x5mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size130x101x77x4.5 mm (77x101x4.5 spiral, 130x101x3.0 plain) to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, metallic gland packing rope style 1916 5 mm box of 6 mtr, metallic gland packing rope style 1916 6 mm box 6 of mtr, metallic gland packing rope style 1916 8 mm box of 6 mtr, metallic gland packing rope style 1916 10 mm box of 6 mtr, metallic gland packing rope style 1916 12.5 mm box of 3 mtr, metallic jointing sheets size 1525 x 1650 mm x 2.0 mm thick to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm. unit of measure for this item is no (sheet), metallic jointing sheets size 1525 x 1650 mm x 3.0 mm thick to withstand temperatures up to 560 deg. c & pressure 160 kg/ sq. cm., unit for this item is no (sheet), nonmetallic jointing sheets size 1525 x 1650 mm x 1.0 mm thick. unit for this item is no(sheet), nonmetallic jointing sheets size 1525 x 1650 mm x 2.0 mm thick. unit for this item is no(sheet), gland packing ring size 54x34x10 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, spiral wound metallic gasket size 65x42x11.5 mm to withstand temperature up to 350 deg. c & pressure 160 kg/sq. cm, gland packing ring size 44 x 24 x 10 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, gland packing ring size 32 x 20 x 06 mm to withstand temperature up to 560 deg. c & pressure 160 kg/sq. cm, asbestos white rope style 1056 round-6mm make-champion/spitman, gasket packing material<>asbestos white<>rope<>style: 1000 round<>size: 6 mm - 5 kg pk, asbestoswhiteropestyle1000 round 8mm make-champion/spitman, gasket & packing mat<>asbestos white<>rope<>style 1000 round<>8 mm - 5 kg pk, asbestos white rope style1000 round10mm make - champion / spitman gasket & packing mat<>asbestos white<>rope<>style 1000 round<>10 mm - 5 kg pk, asbestos white rope style1000 round12mm make- champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>12 mm - 5 kg pk, asbestos whiterope style1000 round16mm make - champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>16 mm - 5 kg pk, asbestos white rope style1000 round19mm make- champion / spi tman gasket &, packing mat<>asbestos white<>rope<>style 1000 round<>19 mm - 7.5 kg pk, gskt&am
Tender For procurement of consumables for u#3 aoh & day to daymaintenance of odp-ii at ntps eklahare. - chemicals, lapping compounds and adhesives<>adhesives<>compound<>sealant<>holdtight 500 gm tin note- 500 gm x 20 nos. pack or 1000 gm x 10 nos. pack), chemical & adhesive<>adhesive<>compound<>steel repair / sealent<>metal putty - belzona ceramic 1811 note- suitable for slurry pump casing, gasket & packing mat<>rubber<>cord<>round<>, mm, gasket & packing mat<>rubber<>cord<>round<>, mm unit:meter, gasket & packing mat<>rubber<>cord<>round<>6mm, gasket & packing mat<>rubber<>cord<>round<>, mm, gasket & packing mat<>rubber<>cord<>square<>, 16 mm (silicon), asbestoswhiteropestyle1000 round 8 mm-5kg pk, gasket & packing mat<>asbestos white<>rope<>style 1000 round<>19 mm - 7.5 kg pk, gasket & packing mat<>asbestos white<>rope<>style 1000 round<>10 mm - 5 kg pk, gasket & packing material<>asbestos white<>rope<>style: 1000 round<>size: 6 mm - 5 kg, gasket & packing mat<>asbestos white<>rope<>size: 22 mm - 5 kg pk, pump<>application: slurry<>make: indure<>model: d-135<>rubber ring 250 nb note- rubber ring 250 nb-qty.50 nos. + rubber ring 300 nb qty.-50 nos., pump<>application: slurry<>make: indure<>model: d-135<>rubber ring 200 nb, belts<>v-belt<>type: a<>no: 82<>set of 3 belt note -v belt a-84 instead of a 82, o-ring, cord, seal, bush<>oil seal<>neoprene<>metal impregnated<>35x54x10 in mm note- ct fan oil seal 55x70x8 mm, o-ring, cord, seal, bush<>oil seal<>neoprene<>metal impregnated<>100x120x12 note-o/seal neoprene 100x120x12, indore toughened glass (sight glass) note-1) size-170 x 19 mm qty-30 nos. 2) size-165 x 19 mm qty-30 nos., hoses, tubing's and hose fittings<>hose<>flexible steel<>ss<>hose 1 / 2 inch bsp, 1 mtr long note- ss flexible hose 1/2" l-1m, belt<>v-belt<>b<>no 60<>set of 1 belt make-b60, pump<>application: slurry<>make: indure<>model: d-85<>flat belt, part no: 3850 x 170, pump<>application: slurry<>make: indure<>model: d-135<>driving belt 3650 x 170, coupling<>flexible<>flexible<>lovejoy<>rubber spider l 190, coupling<>flexible<>flexible<>lovejoy<>coupling pad for l 110 unit:nos, gasket & packing material<>neoprene rubber<>sheet<>thickness: 2.0 mm<>size: 1000 mm x 2000 mm note- rubber gasket of 3 mm instead of 2 mm, gasket & packing mat<>asbestos<>jointing sheet<>style 54 super non-metallic<>1525 x 1650 mm th 2.0 mm unit: kg, gasket & packing mat<>asbestos<>jointing sheet<>style 54 super non-metallic<>1525 x 1650 mm th 3.0 mm unit: kg, gasket & packing mat<>asbestos<>jointing sheet<>style 54 super non-metallic<>1525 x 1650 mm th 1.0 mm unit: kg, gasket & packing mat<>non-asbestos<>gland<>style 9001c stoplik<>10 mm note- style1100, gasket & packing mat<>non-asbestos<>gland<>style 9001c stoplik<>12 mm note- style1100, gasket & packing mat<>non-asbestos<>gland<>style 3116 champion<>14 mm thick note- style1100, gasket & packing mat<>non-asbestos<>gland<>style 3116 champion<>16 mm thick note- style1100, gasket & packing mat<>non-asbestos<>gland<>inmarco style 102<>18 mm th note- style1100, general hardware<>consumable<>general<>tape<>ptfe tape 13 mm width note- ptfe teflon tape w-12 mm, t-0.1 mm, l-10 mtr. unit:nos., coupling<>compl coupl assy with spider & pin bush note -complete coupling assembly rb-144 unit - set, coupling<>rb-144 coupl bush & pin lock nut set note - coupling bush + pin lock nut set for rb-144, coupling<><>flexible<>rb-162 coupl bush & pin lock nut set note - coupling bush + pin lock nut set for rb-162, coupling<>flexible<>flexible<>lovejoy<>ci coupling with rubber spider l-150 note-only rubber pad for coupling l150, coupling<>flexible<>flexible<>lovejoy<>coupling no rb-162 note -complete coupling assembly rb-162 unit - set, valve<>ball<>body: ss<>size: 1/2 inch<>complete valve assembly, valve<>ball<>body: ss<>size: 1 inch<>complete valve assembly, valve<>ball<>body: ss<>size: 3/4 inch<>complete valve assembly, plummer bl
Tender For supply of engine boring repair 15 kva , crank finishing 15 kva , connecting rod 15 kva , main bearing 15 kva , began bearing 15 kva , oil seal big small 15 kva , push rod rubber 15 kva , lub oil filter 15 kva , water separator 15 kva , self starter repair 15 kva , fip change 4 cylinder 15 kva , piston ha 15 kva , ring set ha 15 kva , liner ha 15 kva , packing set ha4 15 kva , head gasket 15 kva , head complete 15 kva , anabond tube 15 kva