Latest pipe clip Tenders | Government pipe clip Tenders

Central Government/Public Sector

CTN :43028824

24 Dec, 2025 NA

Purba Medinipur - West Bengal

Tender For bid to ras supply of main engine spares for repairing of exhaust gas leakage from turbocharger d d - five zero four one zero three five three five gasket for turbo , six one three one eight three zero three gasket , nine eight four one two five zero nine flat engine , five zero four one zero three four three five gasket , five zero zero three three nine five four two pipe clip , five zero four one three seven five two eight stud m ten x 1point 5 mm , five zero four zero eight two four two two exhaust manifold gasket

Central Government/Public Sector

CTN :43290996

12 Jan, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 300 sq mm 3 point 5 core multistrand aluminium armoured cable with pvc or xlpe insulation , aluminium lugs 300 sqmm , aluminium lugs 185 sqmm , single compression brass gland 70 mm , anti corrosive compound for electrical joints -lug paste

State Government

CTN :43272651

23 Dec, 2025 7.00 Lacs

Jaisalmer - Rajasthan

Tender For supply of various size c.i. detachable joints use for pvc pipe

corporations/Associations/Others

CTN :43161603

07 Jan, 2026 NA

Thiruvananthapuram - Kerala

Tender For e-tender for the procurement of drugs and supplies for the year 2026-27 - blood administration set with microagregate filter mi, bone marrow aspiration needle 16g, bp blade size -10, bp blade size -11, bp blade size -15, bp blade size -20, bp blade size -22, disposable cvp catheter triple lumen (seldinger technique) 7f, disposable cvp catheter triple lumen (seldinger technique) 5f, disposable needle 22g x 1", disposable needle 23g x 1", disposable needle 24g x 1", disposable needle 26g x ", disposable needle 18g x 1", disposable syringe with fixed needle 29 g (1ml graduated) 100 iu, disposable syringe with fixed needle 29 g (1ml graduated) 40 iu, disposable syringe without needle ( iso 7886) 2 cc, disposable syringe without needle ( iso 7886) 5 cc, disposable syringe without needle ( iso 7886) 10 cc, disposable syringe without needle (iso 7886) 20 cc, disposable three way stopcock 1 unit, endotracheal tube 2.5 1 unit, endotracheal tube 3.0 1 unit, endotracheal tube 3.5 1 unit, endotracheal tube 4.0 1 unit, endotracheal tube 4.5 1 unit, endotracheal tube 5.0 1 unit, endotracheal tube 5.5 1 unit, endotracheal tube 5.5 with cuff 1 unit, endotracheal tube 6.0 1 unit, endotracheal tube 6.0 with cuff 1 unit, endotracheal tube 6.5 1 unit, endotracheal tube 6.5 with cuff 1 unit, endotracheal tube 7.0 with cuff 1 unit, endotracheal tube 7.5 with cuff 1 unit, endotracheal tube 8.0 with cuff 1 unit, endotracheal tube 8.5 with cuff 1 unit, endotracheal tube 9.0 with cuff 1 unit, epidural set with lor syringe & filter 18g, fistula needle 16g, fistula needle 17g, folleys catheter size 16f x 30 ml, folleys catheter size 18f x 30 ml, folleys catheter size 14f x 30 ml, folleys catheter size 12f x 10 ml, folleys catheter size 10f x 10 ml, i.v. cannula 24g, i.v. cannula with injection port 20g, i.v. cannula with injection port 22g, i.v. cannula with injection port 18g, i.v. cannula with injection port 16g, i.v. set with 22g needle (iso 8536) 1 unit, infant feeding tube size 4f, infant feeding tube size 10f, infant feeding tube size 5f, infant feeding tube size 6f, infant feeding tube size 8f, nelaton catheter size 12, ryles tube size 10f, ryles tube size 12f, ryles tube size 16f, scalp vein set size-22g, scalp vein set size-24g, sics blade (cresant) 2.5mm/2.6mm angled bevel up, sics blade (keratome) 2.8mm angled bevel up, sics blade (side port) 15 straight lance tip, spinal needle size 23g, spinal needle size 25g, spinal needle size 27g, suction catheter size 10, suction catheter size 6, suction catheter size 8, suction catheter size 14, suction catheter size 12, umbilical cord clamp -, urine collection bag with valve outlet 2 litre, yankauer suction set (vacusuck set) - moulded transparent having no joints on the surface of the tubing 2.5 m, anti a monoclonal igm titre value 512 (minimum) solution 10 ml, anti ab monoclonal igm titre value 512 (minimum)solution 10 ml, anti b monoclonal igm titre value 512 (minimum) solution 10 ml, anti d monoclonal igm titre value 512 solution 10 ml, anti human globulin serum (coombs serum) poly specific (igg + c3d) 5 ml, anti human serum (lisscoombs for geltechnology- gel card &solution) null, blood collection single bag with cpda1 (49ml), 350ml bag with diversion pouch 20ml and needle protector (iso 3826) 350 ml, blood collection tripple bag with sagm , diversion pouch 20ml with needle protector. (iso 3826) sterile collapsible non-vented bags made up of dehp plasticized pvc. diversion pouch 20 ml. primary bag - 350 ml, with cpd (49 ml). first satelite bag - 300 ml, second satelite bag - 300 ml for platelet storage for 5 days. slits on both sides of the bags. flexible non-kinking transparent tubings. needle - 16g straight sharp regular margins ultrathin walled and beveled tips with needle protector., dengue igm capture elisa (1,2,3,4) kit 1test, dengue latex agglutination test kit(rapid method) 1test, fourth generation elisa kit for detection of p24 antigen and antibody to hiv 1&2 1test, hepatitis b

Central Government/Public Sector

CTN :42887331

27 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For corrigendum : certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to w

CTN :43114690

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of miscellaneous electrical items for g+5 storied office building at 149, jakeria bunder road, sewri, mumbai-400015 - "supplying and erecting hms pvc conduit frls grade 25 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 20 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 32 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", supplying and erecting of gi box for concealed type 1 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 2 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 3 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 4 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., raceways , under floor trunking, supply and installation of totally concealed underfloor race-ways as approved by bl eic. the channels shall be fixed to the floor with aluminum strips so that there is no movement of the channels when civil work(pouring of cement concrete) is being done. the channels shall be earthed at the boxes and at the joints with 14swg bare copper wire with screws so that earth is continuous. the channels shall be terminated at the junction boxes which shall be measured separately. refer section details rate to include civil works such as chasing the floor & reinstatement to final finish., nominal sizes:, 100 x 50 x 2.00mm anodised alum box section, 50 x 50 x 2.00mm anodised alum box section, , under floor trunking junction box, s & i of underfloor frame type gi junction box fabricated out of 16swg gi sheet steel without cover; box shall be painted with two coats of red oxide primer and two coats of synthetic enamel paint. cut outs shall be provided on the sides of the box to facilitate the entry of raceways as described above. ms cover shall be powder coated and fixed with underside fram to the under floor jb. jb shall be frame type and shall not bend if stepped on it, 300 x 300 x 50mm deep, 150 x 150 x 50mm deep, , s & i of 2.00mm thick cover plate for the junction box fabricated out of 2.00mm ms sheet steel and powder coated to approved shade with all fixing arrangements the size of the cover plate shall be 25mm more than the cover size of the junction box on all sides , , cover plate suitable for 300 x 300 x 50mm deep jb, cover plate suitable for 150 x 150 x 50mm deep jb

State Government

CTN :43255628

25 Dec, 2025 1.50 Lacs

Churu - Rajasthan

Tender For supply of cid joints for pvc pipes under phed division ratangarh

State Government

CTN :43259327

25 Dec, 2025 1.50 Lacs

Ratangarh-Raj - Rajasthan

Tender For supply of cid joints for pvc pipes under phed division ratangarh

Central Government/Public Sector

CTN :43225523

27 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of breather assy , hexagon bolt , water pipe , rubber pad , stud , clip , connector sleeve , rubber sleeve , hose clip , sensor , breather plug , rubber sleave , clip 75mm , oil line turbo , transmitter , transmitter-air , transmitter atm , sensor pressure , sensor oil pressure , transmitter pressure , chock , adhesive , connection , relay , power take off assy , water hose , camshaft bearing , engine harness , spacing bar , jubilee clip , 5 inch turbo hose , engine mounting front , governor , valve tappet , ring gear , con rod bearing std , main bearing set std , gear right assy , gear left assy , vibration damper , injection line set , engine mounting rear , rocker shaft assy , shaft , cylinder liner , liner assy , push rod , piston assy , connecting rod assy , oil pump assy , turbo charger right , turbo charger left , hydraulic cylinder left , hydraulic cylinder right , crankcase assy , high grip hose clip 50-70mm , 2 inch bsp dowty seal , seal gasket , oil inlet turbo , oil line inlet , cylinder head assembly , oil water heat exchanger assy , thrust ring set std , kit overhaul gasket , crankshaft bearing stud , washer , camshaft pinion assy , protection , pipe clip , fastening bracket , oil filter support , o ring , threaded union m16 , threaded union , water manifold right , water manifold , heater water , generator pully , oil nozzle , 5000 hourly or 10 yearly routine on bme of acv h-194 . ) /bid number: gem/2025/b/6915937 * /dated: 17-12-2025 & & / bid document1 / 73

corporations/Associations/Others

CTN :43200812

26 Dec, 2025 NA

Margao - Goa

Tender For supply of stainless steel machine washer as per rcf drg , pipe clip 43 as per rcf drg , pipe dia 42 od 2x 2x 1036 as per rcf drg , pipe dia 42 od 2x 2x 1100 as per rcf drg , stainless steel hex head bolt as per rcf drg , stainless steel nyloc nut m8 as per rcf drg

Pipe Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors