Latest pipe wrap Tenders | Government pipe wrap Tenders

Central Government / Public Sector

CTN :39629089

01 Apr, 2025 NA

Secunderabad - Telangana

Tender For supply of set of accessories consisting of 05 items for dual flush valve suitable for make: m/s marc model mac-3080 or m/s essess model no-e251c or m/s jaquar model flv-chr-1085. 1) brass chrome plated cap of si ze (approx.) od-56 mm with one end internal threads & built in anti-theft arrangement: qty 01 no/set. 2) set of brass c hrome plated front push buttons od -35 mm (approx.) cap of od- 45 mm (approx.) having anti-theft arrangement with one end suitable to fit in above mentioned models: qty 01 set/set. 3) outer spring of od 50 mm(approx.) and free leng th of around 40 mm(approx.) to suit above models. qty- 01 nos/set 4) internal spring free length 70mm, od -30mm thi ckness around 1.5mm (approx.) qty-1 nos/set 5) hdpe rectangular shaper washer of size 40x20 mm(approx.) internal shaping holding arrangement which suit above models: qty-1 nos/set. ]

Central Government / Public Sector

CTN :39605840

17 Mar, 2025 NA

Haldia - West Bengal

Tender For supply of rhm24r7129 m/s r stahl make display and emergency push buttons

CTN :39606898

28 Mar, 2025 NA

Shahjahanpur - Uttar Pradesh

Tender For supply of polyester buttons dia 20+ 1/-1mm type slot cut engraved" indian army" , dark og.

Central Government And Public Sector

CTN :39112820

20 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

State Government

CTN :39565718

10 Mar, 2025 1.51 Lacs

Udhampur - Jammu And Kashmir

Tender For providing and fitting of essential items and allied material for snow clearance operation at nathatop sanasar road - supply, testing and commissioning of 48v smps float cum boost automotive battery charger with moveable trolley stand for snow operation at nathatop - sanasar roadgeneral technical requirements for battery charger suitable for 48v vrla type battery1.) type -float & float cum boost charger for vrla type, full wave, full controlled type. 2. ) ratings- 15 a float cum boost for 48v, 150 ah vrla type battery 3. ) ac input- i) voltage 415 vac 10%ii) frequency 50hz 5% iii) phase 3 - phase 4.) d.c.output voltage settings -nominal float fc 48/54.5v (adj. by + 20%, - 5% bc 48/66.5v (adj. by + 2%, - 5%) 5.) output current limit 15a 15a 6. ) power conversion ac to dc by means of three phase full wave, half controlled bridge rectifier consisting of thyristors and diodes. 7.) voltage regulation at bridge output. + 1% of set value for + 10% input voltage variations, 0-100% load variation. 8. ripple voltage less than 3% rms without battery connected. 9. efficiency more than 80% at full load 10. protections (a) input side ac input mccb & elbs with input on/off switch and fuses, contactor (b) output side dc output mccb with output on/off switch and fuses. (c) protection current limit protection, soft start feature, surge suppressor. fast semiconductor fuses for rectifier bridge. (d) control circuit fuses (e) capacitor circuit rectifier hrc fuses. (f) over-voltage cut-back (g) charger over load / short circuit (h) blocking diode 11. controls and switches followings controls and switches are provided in the system 1 ac input source mccbs with interlocking 2 dc output mccb 3 auto/manual float/boost mode selector switch. 4 float and boost voltage variable potentiometers. 5 manual voltage adjustment potentiometer 6 test push button 7 reset push button 8 battery current adjustment potentiometers 9 heater s power supply switch 12. features the following features are provided in the systems: 10 soft start on dc side 11 class-f insulation for all magnetic 12 automatic voltage regulation. 13 automatic changeover from float to boost and vice versa based on current, drawn by battery. 14 filter circuit to eliminate ripple. 15 charger current limit 16 separate battery path current limit. 17 built-in auto phase reversal of operation. 13. meters f.c. b.c. (i)input voltmeter (i) common (ii) input ammeter (ii) input ammeter (iii) output voltmeter (iii) output voltmeter (iv) output ammeter (iv) output ammeter. battery volt meter battery ammeter earth leakage ammeter 14. indications phase on lamps (ii) output on lamp a)phase on lamps (ii) output on lamp. (iii) charger on float led (iv)charger on boost led. 15. annunciation with audiovisual alarms. (i) ac input mains failure (ii) input phase failure (iii) ac under voltage iv) input phase failure v) rectifier fuse failure vi) output fuse failure vii) filter fuse failure viii) dc under voltage ix) dc over voltage x) charger trip xi) capacitor fuse fail xii) output mccb tripped xiii) charger over load xiv) earth leakage xv) dc earth fault xvi) alarm supply fuse failure xvii)battery low condition. v) rectifier fuse failure vi) output fuse failure vii) filter fuse failure viii) dc under voltage ix) dc over voltage x) charger trip xi) capacitor fuse fail xii) output mccb tripped. note : all the alarms shall be provided through electronic display cards. audio alarm through buzzer, visual indication through 10 mm leds & alarm ackn. / reset and led provision is through push buttons. 16. operating ambient temperature surrounding the panel 00 to 500 c 17. surrounding the panel relative humidity. 0-95% non-condensing 18. panel (i) protective grade (ii) cooling (iii)paint ip 42 natural air-cooled smoke grey of iss-692 shade a) average winding temperature rise over ambient temperature b) insulation class c) insulation breakdown voltage. as per relevant iss. f 3 kv for 1 min withstand. 19. cables 1100 v

Co-operative

CTN :39589829

15 Mar, 2025 63.8 Thousand

Rewari - Haryana

Tender For supply of electricals goods - 3014123, 1000.000, motor control board as per belowsupply installation and commisioningin this panel as per below switch gear must be installpanel box ss304 size 300mm x 600mm x 200mmmain incomer 1x32amp mcbo/g mcb 6ampx4 nos for 4 nos dol starter i/cdol starter 3 phase &neutral panel for 1 hp motor 4 nos (contactors x o/l relays with motor connectors)all switch gears controlling relays as per motor standard only like 1 to 1.5 amp onlyon motor body all the dol starters push buttons red&blue led idication type on&off indicatorson&off should be requireall the contactors relay should be l&t(mnx mn2) or schneider(lc1d) onlysite visit mandatory for installation workthis is require for line 4 &5 conveyor controlling work from packing section, 3014093, 200.000

Central Government/Public Sector

CTN :39614935

13 Mar, 2025 NA

Hyderabad - Telangana

Tender For supply of spares for zoller make tool presetter - z05e6026 ; membrane keyboard smile2 z05e6026 ; zoller; membrane keyboard smile2 3 buttons, z05e6033-03 ; board for valve terminalz05e6033-03 ; zoller ; board for valve terminal incl. 3/5 valves, z05p5719;valve block incl.3 valvesz05p5719; zoller ; valve block incl. 3 vales on 3-socket connecting block, z05ek1129-00; one-hand operating buttonz05ek1129-00; zoller; one-hand operating button with cable and 5-pin bushing for transmitted light connection

CTN :39236017

10 Mar, 2025 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : dr.mvr rtpp-stage-i-em&mrt-procurement of contactors, relays, switches and push buttons for exhaust fans of ash plant/stage-i.

State Government

CTN :38601213

08 Mar, 2025 NA

Talwara - Jammu And Kashmir

Tender For bid to ras supply of stage lighting of matrika auditorium - sitc of high performance led beam projector fixture , sitc of led ubpl fixture , sitc of led light source features 400w 36v inbuilt smps , sitc of pc wing controller , sitc of the dmx data repeater operates on a voltage range of 100 to 220v , sitc of fixture equipped with a 200w original , sitc of product featuring a flicker free led lamp , sitc of product powered by a 400w led light engine , sitc of lighting fixture which supports multiple control modes , sitc of high quality dimming out junction box 1 way , sitc of high quality power junction box 1 way , sitc of 2 core cable with sheathed housing , sitc of frls copper unarmored flexible cable , sitc of desktop computer , sitc of suspender cum clamps , sitc of dmx male female connectors 3 pin gland , sitc of 48 way power marshaling box sitc of high-performance led beam projector fixture capable of producing a precise and bright color range suitable for dynamic lighting applications. optics: lens angle: 25 degrees, providing a versatile light spread for various lighting needs. holder: size 20x15mm, color black. surface type: bead surface with concave frosted finish. control & performance: dmx channels: 8 dmx channels with 8-bit color mix mode for customizable control over color and effects. voltage: operates within a range of 100-220v at 50/60hz. power: total wattage of 140w, with maximum power consumption capped at 200w with a smps of 26 volt 3.2 amp current. red wattage - 21.6watt, green wattage - 45watt, blue wattage - 40 watt, white wattage - 39watt with total of 1 ampere of current. housing and finish: material: durable cast aluminum. color: black powder-coated for a sleek finish. ip rating: ip65, suitable for outdoor environments. along with ip65 power and dmx connectors bid number/ ( ( ) ) : gem/2024/b/5711214 dated/ * : 16-12-2024 bid document/ 2 2 1 / 27 suitable for any weather conditions certifications and compliance: ce, iso, and rohs certifications for safety and reliability. weight: >5.0 kg, making it portable and easy to install. make in india certification to be provided. installation and requirements: the supplier is responsible for complete installation and commissioning, ensuring integration with existing systems. operational training to be provided to designated personnel. submission of a product datasheet is required. required 3 years warranty., sitc of led ubpl fixture which operates on an ac voltage range of 100-240v 200watt and 1.240 ampere current and a inbuilt smps of 200w 36volt and 5.3amp of current which offers luminous options of reputed brand lm-80 certified led with chromaticity of a warm incandescent bulb. colour temperature cri & tlci values equivalent or greater than 90 designed for efficiency lux@5 meters is above 4500 at 26 degrees, total power is 300w. power interface: power connector input / output. signal interface: three-core dmx signal input / output. advanced optical systems ensure clear imaging quality. control panel: lcd panel + 4 buttons. it performs well in environments with ambient temperatures below 40 c and maintains a maximum surface temperature of 85 c. the light has a net weight of > 8.0 kg and a gross weight of > 10.0 kg, flicker-free, thanks to pwm frequency adjustment, up to 25 f./sec. 4 blades manual framing system, dmx monitoring. remote access through rdm. aluminum structure body. beam angle options of 26 for versatile lighting effects. outstanding strobe effect, with adjustable speed. no flashing under the hd camera. heat dissipation mode: air cooling. intelligent fan speed regulation: the fan will not work when the lamp is not lit. the fan will change with the temperature change, thus reducing the noise of the fan and creating a good performance environment. maximum tolerable ambient temperature: 40 c. maximum tolerable surface temperature: 65 c. minimum acceptable working temperature: -5 c. it is dmx512 controlled and measures 340 x 270 x 650 mm, ma

Central Government / Public Sector

CTN :39569618

17 Mar, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of compatible monitor screen 7 inches for cctv system as per no. icf/md.spec-269 issue status:0 2, rev:05 similar to dahua make model no. dhi-dae-mlcdf7-t with 07 buttons (capable to perform (screen on/off), me nu (menu of screen, include brightness setting and version info),(volume up), (volume down), (mirror setting), f1 (displ ay main menu of mxvr/ mnvr), f2 (back)) and other technical specifications mentioned in annexure-i [ warranty peri od: 30 months after the date of delivery ]

Pipe Wrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors