Latest pitting work Tenders | Government pitting work Tenders

CTN :40521312

19 Jun, 2025 1.66 Lacs

Betul - Madhya Pradesh

Tender For supply of making 03 number of 150mm nominal dia bore hole , carrying out soil test , bulk density and moisture content test , triaxial shear test , bearing capacity of soil and suggested foundation test , recommended sbc should be given for , excavating comma laboratory tests and reporting with photographs , rl of the ground level oblique foundation level , photographic record of geo exploration , recommendation , swelling index and swelling pressure , recommendation for utilization of excavated soil for filling under floors

CTN :40529462

23 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of excavating chain drive gear box for frm as per plasser part no.-wn83.80 sub re14.101 ,m ake-plasser, dana motion. [ warranty period: 30 months after the date of delivery ]

CTN :40501610

02 Jun, 2025 NA

Panipat - Haryana

Tender For supply and delivery of bought-out materials in connection with composite work for utilities offsites part b for panipat refinery expansion project of iocl panipat haryana-, supply of gl earthing strip along the cable trenchs or cable trey or fixing to walls or structure including welding at joint providing anti-corrosive paint orbitumen and jute covering for welding portion, clmping and necessary hardware for connecting, etc, as per approved drawings, specifications and directions of engineer-in-charge., , the amount of hot dip galvanizing shall be min 610 gm per sq mter, , 50 x 6 mm, , 25 x 3 mm, , 100 x 12 mm, , supply of gl earthing strip buried individually at a depth of 500mm including welding at joint, providing anti-corrosive paint or bitumen and jute covering for welding portion, clmping and necessary hardware for connecting, excavating and refilling etc, as per approved drawings, specifications and directions of engineer-in-charge. the amount of hot dip galvanizing shall be min 610 gm per sq mter, , 50 x 6 mm, , 25 x 3 mm, , 100 x 12 mm, , supply of gl earth plate as per std.7-51-0103, complete with anchor bolt, including, as per approved drawings, specifications and directions of engineer-in-charge. the amount of hot dip galvanizing shall be min 610 gm per sq mter, , gl earth plate as per std.7-51-0103 (dimension 400 x75x10mm having 10 dia holes for 8 mm dia bolt), , freight charge for 'door delivery at b and r's iocl panipat refinery project site [excluding gst]:

CTN :40383883

02 Jun, 2025 NA

Ernakulam - Kerala

Tender For providing of custom bid for services - excavating, crushing and loading of legacy gypsum at phase i yard fact (cd)

Central Government/Public Sector

CTN :40228818

02 Jun, 2025 17.20 Lacs

Bangalore - Karnataka

Tender For corrigendum : providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; hiring of hydraulic excavator for excavating ore, loading of gravel onto the tractor, waste disposal/reclamation at excavation s..

State Government

CTN :40343066

27 May, 2025 20.21 Lacs

Ahmedabad - Gujarat

Tender For special repair to government f-colony, shahalam, ahmedabad. (repairing and replacing of drainage line by excavating in small narrow space by manual/ machine, inspection chamber, manhole and other miscellaneous work for block no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 31, 32, 29, 30 and other places)

State Government

CTN :40314465

27 May, 2025 7.43 Crore

Porbandar - Gujarat

Tender For increasing in capacity by excavating and deepning medhacreeck tidal regulator reservior at village miyani of porbandar taluka & district.phase -1 sub estimate-7(2 nd attempt)

State Government

CTN :40095274

03 Jun, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms

CTN :40241122

28 May, 2025 NA

Hooghly - West Bengal

Tender For supply of disconnecting and taking out defective under ground lt cable from trenches pole pipe floor wall etc , supply laying testing and connecting xlpe sheathed cable heavy duty with stranded aluminium conductor 1100 volt grade of size 4.0 core 10 sqmm. , all as per boq item no 2.00 here in before but of size 3.5 core 70 sqmm. complete all as specified , all as per boq item no 2.00 here in before but of size 3.5 core 120 sqmm. complete all as specified , excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole taking out and laying of cable etc , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protec tion of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia laid in trenches under roads fixed to poles , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia laid in trenches under roads fixed to poles , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore complete all as specified. , s and fix hdpe dwc double wall corrugated of dia 25 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 40 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , s and fix hdpe dwc double wall corrugated of dia 50 mm incl disconenction and connection to cable near oh for pipe fixing incl joints complete , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground earth pit not less than 2.25m below ground level , supply and fix metal cable route indicator of height 750 mm ms flat of 40 mm x 4 mm with circular 100 mm diameter ms sheet of minimun thickness 3mm , taking down dismantling of unserviceable lt panels complete all as specified and directed by engineer in charge. , supply designing install testing commission 3 phase and neutral 415 volts outdoor type cpri type tested having certification , all as per boq item no 57.00 here in before but of size 1.00m x 0.45m x 1.00m with the following incoming and outgoing , wrecking crow bar or claw bar as per is 706 (q3)

Pitting Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government