Tender For supply of machine, equipment and others - list of machine and equipments, laproscopic hd camera brand - karl storz/conmed/olympustechnical specificationresolution: 1920x1200 pixes / 1900x1000 pixescable length: 300 cm, ultrasonic harmonic scalpelbrand - johnsontechnical specificationdimensions: (hxwxd) 5.3" 14.5"x15.2" voltage: 100-240 vac frequency: 50/60 hz rated current: 3 amp , ultrasonic harmonic scalpelbrand - valley labtechnical specification macrobipolar/bipolar: 473 khz sinusoid, 100% duty cycle. seal: 473 khz sinusoid pulsed , hand instruments for laproscopy brand- karl storz/ olympustechnical specification i) veress needle: it should be with spring action blunt style -12 cm: 1 no 10 cm: 1 no 8 cm: 1 no ii) trocar and cannula: 10 mm: 2 nos 7 mm: 1 no. 5 mm 6 nos it should consists of trocar, cannula with insufflation and multifunctional valve and must have pyramidal tip. iii) reducer/reduction sleeve 5 mm. 1 no iv) telescopes: 10 mm- 0 - 1 nos -30 - 1 nos 5 mm-30 1 nos rigid rod lens system provides good resolution and the better dept perception. it should have uniform image brightness and autoclavable. the 300 forward oblique angle and permits for greater latitude for viewing underlying areas under difficult anatomical conditions. v) suction cannula: 10 mm - 1 no 5 mm -1 nos vi) laparoscopic scissors: curved (monopolar metzenbaum dissector 5mm diameter): 1 nosstraight (bipolar): 1 nosperitoneal scissor: 1 nosvii) unipolar forceps (hook & spatula): 2 nos viii) bipolar forceps : 2 nos ix) atraumatic forceps: maryland dissector forceps: : 2 nos. fenestrated forceps: : 2 nos. x) needle holder (flat jaw) with handle : 2nos xi) monopolar cable (reusable):1 nos. xii) bipolar cable (reusable): 1 nosxiii) allis (double row of teeth) grasper: 1 nos xiv) aspiration needle: 1 nos. xv) reducer/ reduction sleeve (5mm): 1 nos xvi) grasping forceps (toothed & rachet 5mm): 2 nos xvii) laparoscopic knot pusher: 1 nos xviii) clip applicator (reusable): 5mm -: 1 nos : 10 mm: ino xix) uterine manipulator: 1 nos xx) clips( medium & large) xxi) drilling needle: 1 nosxxii) infiltration needle: 1 nos xxiii) biopsy forceps (toothed punch biopsy): 1 nos xxiv) myoma fixation screw: 2 nos xxv) tissue morcellator with base unit & accessories: 1 nos , dual wavelenght laserbrand- zeisstechnical specification laser type: diode, semiconductor wavelength : 1470nm+635nm max power: 15 watts/1470nm+5mv/635 aiming beam : 635nm/1, 4mw max or 515nm/2, 5mw max operation mode : continuous or modulated pulsed time : 0.05ms-1000ms beam delivery : sma905 connector optic fiber compatible : optic fibers having a core from 200um to 1000um, na=0.22~0.48 beam emission initiation : footswitch controller :microprocessor display : 10.1" ips with touch panel medical approved cooling : internal, air and thermoelectric cooling power supply of the laser: dc 24v/8.33a from the separate ac power supply of ac adapter : single phase 100-240va; 50-60hz, max 90w ac adapter dc 24v/8.33a medical approved laser dimensions: 27cm*24,5cm x 9cm laser weight: 2.75kg laser case dimensions : 53cm x 38cm x 23cm weight of laser with cases : 9kg environmental conditions during work : from +10 to 24 c degree, relative humidity from 30% up to 60% cass of medical device iib laser safety class 4 electric safety class i type b housing protection degree ip20b , hd camera setbrand- karl storz/ olympustechnical specification (i) hopkinsa forward-oblique telescope 30a, diameter 4 mm, length 30 cm, a utoclavable, fiber optic light transmission incorporated, color code ed : 1 nos(ii) telecam c3 : 1 nos(iii) image1 st hx one-chip full hd camera head, 50/60 hz, fixed focus, prog ressive scan, soakable, gas-and plasmasterilizable, focal length f = 16 mm, 2 freely programmable camera head buttons, for use with image1 x-link tc301, tele pack + and tp101 : 1 nos(iv) medical grade surgical monitor - fhd : 1nos(v) cold light fountain power led 175 scb, with integrated karl storz-scb, high-perfo
Tender For supply of set of harness, cable management system and accessories for lhb eog gs coaches as per the follo wing drawings. icf specification icf/elec/968 shall be followed for preparation and supply of this cable harness. 1) harness of under frame arrangement to (a) cable harness to drg no. lgs/ay/bw 70002 alt-c-1 set (b) cable management system a nd accessories to drg no. lgs/eog 71001 col-ii altg-1 set 2) harness of roof arrangement to (a) cable harness to drg no. l gs/eog 70005 alt-d and lgs/eog 70008 alt-a-1 set in assembled condition. (b) cable management system and accessories to drg no. lgs/eog 76001 col-ii alt-k - 1 set and drg no. ls/ay/bw 74001 col-iv alt-c -1 set note: 1. cable ha rness suppliers shall procure e-beam cable from rdso approved sourcesonly. 2. the e-beam cable required for cable harnes s shall be as per rdsospec.no.elrs/spec/elc/0019.rev.4 3. packing instruction: pi141 ver-3.0 [ warranty period: 30 m onths after the date of delivery ]
Tender For supply of set of harness, cable management system and accessories for lhb eog gs coaches as per the follo wing drawings. icf specification icf/elec/968 shall be followed for preparation and supply of this cable harness. 1) harness of under frame arrangement to (a) cable harness to drg no. lgs/ay/bw 70002 alt-c-1 set (b) cable management system a nd accessories to drg no. lgs/eog 71001 col-ii altg-1 set 2) harness of roof arrangement to (a) cable harness to drg no. l gs/eog 70005 alt-d and lgs/eog 70008 alt-a-1 set in assembled condition. (b) cable management system and accessories to drg no. lgs/eog 76001 col-ii alt-k - 1 set and drg no. ls/ay/bw 74001 col-iv alt-c -1 set note: 1. cable ha rness suppliers shall procure e-beam cable from rdso approved sourcesonly. 2. the e-beam cable required for cable harnes s shall be as per rdsospec.no.elrs/spec/elc/0019.rev.4 3. packing instruction: pi141 ver-3.0 [ warranty period: 30 m onths after the date of delivery ]
Tender For supply of coupling socket assembly with locking arrangement with cable (e-beam) suitable for inter v ehicle coupler (zs coupling) eog system, 750v, 3-phase, 400 amp, 50hz suitable for lhb type ac coache s as per rcf spec. no. edts-105 (rev-e) amendment -1, 2 and 3 lw71300 spec:edts-105 rev-e amend ment 1,2 and 3 [ warranty period: 30 months after the date of delivery ]
Tender For supply of liner kit for brake beam suitable with bogie mounted brake system (bmbs) fitted wagon, 01 set consisting items liner-01 no & screw m8x1.25x15 -02 nos as per attached rdso drawing no-wd08093 -s-2 alt.3, make: escort or similar [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of harness, cable management system and accessories for lhb eog gs coaches as per the follo wing drawings. icf specification icf/elec/968 shall be followed for preparation and supply of this cable harness. 1) harness of under frame arrangement to (a) cable harness to drg no. lgs/ay/bw 70002 alt-c-1 set (b) cable management system a nd accessories to drg no. lgs/eog 71001 col-ii altg-1 set 2) harness of roof arrangement to (a) cable harness to drg no. l gs/eog 70005 alt-d and lgs/eog 70008 alt-a-1 set in assembled condition. (b) cable management system and accessories to drg no. lgs/eog 76001 col-ii alt-k - 1 set and drg no. ls/ay/bw 74001 col-iv alt-c -1 set note: 1. cable ha rness suppliers shall procure e-beam cable from rdso approved sourcesonly. 2. the e-beam cable required for cable harnes s shall be as per rdsospec.no.elrs/spec/elc/0019.rev.4 3. packing instruction: pi141 ver-3.0 [ warranty period: 30 m onths after the date of delivery ]