Latest plasterboard Tenders | Government plasterboard Tenders

CTN :41082915

22 Jul, 2025 9.97 Crore

Samastipur - Bihar

Tender For (nabard)/25-26/samastipur/01 - construction of hl rcc bridge over shanti river in chakmahesshi panchayat near chakmaheshi dhala, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-30, bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specificationi) upto 5m height (using concrete mixer), ii) from 5m upto 10m height (using concrete mixer), r.c.c. grade m-35 in substructure complete as per dwg & tech specificationrcc m-35ii) from 5m upto 10m height (using concrete mixer), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3,

CTN :41082917

22 Jul, 2025 3.59 Crore

Patna - Bihar

Tender For state scheme (nabard)/25-26/barsoi/01 - construction of hl rcc bridge from ganjan to vibhor hat road at ch.-1.720km, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. i) upto 3m depth, providing and constructing temporary island 8 m diameter for construction of pile foundation. assuming depth of water 4.0 m and height of island 4.5 m., dismantling of reinforced concrete pile head complete as per drqwing and technical specification, providing and laying of pcc m15 levelling course 150mm thick below the pile cap. ii. pcc grade m-15 (levelling course), r.c.c. grade m 35 in pile foundation complete as per dwg & tech specification. pile cap in rcc m-35, bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. ii. 1200 mm dia, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 6 mm thick as per detailed drawing., r.c.c. grade m-35 in substructure complete as per dwg & tech specification i) upto 5m height (using concrete mixer), r.c.c. grade m-35 in substructure complete as per dwg & tech specification ii) from 5m upto 10m height (using concrete mixer), r.c.c. grade m-40 in substructure complete as per dwg & tech specification ii) from 5m upto 10m height (using concrete mixer), supplying, fitting and placing hysd bar reinforcement (fe 500) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level pot-ptfe bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, ptfe surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per irc: 83 part-i & ii respectively and other parts conforming to bs: 5400, section 9.1 & 9.2 and clause 2006 of morth specifications complete asper drawing and approved technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 ii. rcc m-35, supplying, fitting and placing hysd bar reinforcement (fe 500) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement concrete wearing course m30 grade including reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3, provision of an reinforced cement concrete crash barrier at the bridge decks& approaches to bridge structures constructed with rein forced cement concrete with hysd r

State Government

CTN :41091277

01 Aug, 2025 NA

Mehsana - Gujarat

Tender For supply of machine crushed b.t. metal 25 mm to 37.5 mm size from approved quarry to government plant site at palodar , including weighing on weight bridge and stacking as per instruction of engineer of engineer in charge. ( for 12 months )

CTN :40642432

16 Jul, 2025 NA

Nainital - Uttarakhand

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , cpvc industrial pipe fittings, schedule 80 (q3) , brick (q3) , m - seal as per is 9197 (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , gun metal gate valves - bhel (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , commercial cpvc pipe fittings (q3) , gi tubing 50mm med grade , gi tubing 80mm med grade , gi tubing 40mm med gde , gi socket 80mm , gi socket 40mm , gi tank nipple 15 mm dia , gi tank nipple 20 mm dia , gi long screw nipple 15mm x 200mm long with two checknuts and washers , gi long screw nipple 20 mm x 200mm long with two checknuts and washers , gi nipple 15 mm x 50mm long , gi nipple 15 mm x 75mm long , gi nipple 20 mm x 50mm long , gi nipple 20 mm x 75mm long , m s butt hinges 100 mm , m s butt hinges 50mm , m s butt hinges 75 mm , plain glass sheet 3 mm thick size 4 feet x 3 feet , plain glass sheet 3 mm thick size 6 feet x 4 feet , glass pane 3 feet x 2 feet x 4mm , glass pane 4 mm 6 feet x 4 feet , glass pane 4 point 8 mm 6 feet x 4 feet , glass pane 4 mm frosted oblique tinted , alm door stopper floor 75mm , aluminium sheet 0 point 63mm thick in 4 feet width , cement opc 43 grade of 50 kg bag , coarse aggregate crushed stone 12 point 5mm graded , coarse sand , flashing tape multipurpose self adhessive bitumen sealing tape of size 10 mtr x 100 mm x 1 point 5mm thick , ms door spring rat rail type 200mm , door spring helical 150mm , helical door spring 300 mm , double action spring hinges mild steel with steel wire spring stove enamelled black 150mm , ms powder coated brackets with fancy knob for 20mm dia curtain rods , stainless steel knob for curtain rods 25mm dia , oil putty wood , plain wooden beading of size 20 mm x 20mm , wc indin type vitreous china white orrissa pattern size 580 x 440mm , cp jet spray with flexible pipe , towel rack cp , cp wall mixer with telephonic shower , bib tap brass 20 mm , brass internal fitting spindle long for 15mm dia concealed stop cock , gland packing rope 15 mm , cp brass toilet paper holder

CTN :41037837

22 Jul, 2025 15.13 Crore

Bhabhua - Bihar

Tender For mgsy/25-26/bhabhua/01 - name of work: construction of proposed hl rcc bridge on durgawati river at swar gadh of rampur block in the dist-kaimur(bhabhua), length- 111.60mfoundationexcavation for structuresearthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 35 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-35 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of loada) initial load test on test pile for 2.5 times the design load specified in drawings1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructurer.c.c. grade m-30 in substructure complete as per dwg & tech specificationrcc m-30 (using batching plant, transit mixer and concrete pump)i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructureproviding and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30 (using batching plant, transit mixer and concrete pump), supplying, fitting and p

CTN :41037856

22 Jul, 2025 7.68 Crore

Jhajha - Bihar

Tender For mgsy/25-26/jhajha/01 - construction of rcc hl bridge on kiyajori se maharaidih, foundation, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap.ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification.pile cap in rcc m-30, bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m.ii. 1200 mm dia, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.00 for each island.), providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specificationi) upto 5m height (using concrete mixer), ii) from 5m upto 10m height (using concrete mixer), r.c.c. grade m-35 in substructure complete as per dwg & tech specificationii) from 5m upto 10m height (using concrete mixer), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 i) sandy material, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5ii. rcc m-30, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement con

corporations/Associations/Others

CTN :41052702

05 Aug, 2025 50.00 Lacs

Somnath - Gujarat

Tender For annual maintenance work for pwd branch with material & labours work year 2025-26 - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.ii in cement mortar., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. i r.c.c. work, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying compacted w.b.m. 100 mm. thick of grading i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying cement concrete 1gem3gem6 1 cement gem 3- coarse sand gem6- hand broken stone aggregate 40 mm. nominal size and curing complete excluding cost of form work in gema foundation and plinth, providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete, providing and laying cement concrete 1gem3gem6 1- cement gem 3- coarse sand gem 6- crushed stone aggregates 20 mm nominal size and curing complete including cost of formwork in a wall caps per coping, providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc slabs and landings, providing and casting in situ ordinary cement concrete m-200 forkerbsperkerb blocks including formwork, curing and finishing complete., providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level, white stone bela masonry block in course in foundation, plinth and super structure with stone of approved quality in cement mortar 1gem5 1cement gem 5 course sand including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 gem 4 course sand, providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. ii cement mortar 1gem4 1 cement gem 4 sand, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls for interior plastering up to floor two level and finished even and smooth including fini

CTN :41055716

22 Jul, 2025 6.60 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of generator set 7.5 kva diesel generating set. complete with diesel engine, alternator and amf control panel conforming to the specification given , xlpe cable xlpe insulated pvc sheathed heavy duty armoured multi core cable 10 sqmm 2 core aluminium conductor , on off changeover switch. on off load change over switches in sheet metal enclosure 63 amp rating four pole 415 volt with side handle operation , lub oil filter , fuel filter , air filter element , air cleaner hose , adjustable spanner for opening of fuel filler fuel line etc. , insulated cutting plier , multi meter to check current and voltage output. , screw driver tester to check the power , first change of oil. 7 ltr quantity of oil and lubricants reqd for first change first servicing as per company catalogue will be supplied along with the generator set. , quick setting compound conforming to is 1344 2018 make acclerex cico fosroc rapidite. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383 2016 , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383 2016 , manufactured sand m sand conforming to is 383 1970 reaffirmed 2002 , pcc block of size 400mmx200mmx200mm , freshly burnt fat lime class c white in clour , cement base paint make snowcem supercem

State Government

CTN :41058396

02 Aug, 2025 NA

Panchmahal - Gujarat

Tender For supplying and stacking various type of building, road &other construction materials, at various places of taluka panchayat, jambughoda under mgnrega (annual unit rate) - cement isi mark 53 grade, etc. opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900 m.m. dia, r.c.c. np3 pipe 600 m.m. dia, r.c.c. np3 pipe 300 m.m. dia, crushed stone aggregate for hard quality 10 to 20 mm, crushed stone aggregate for hard quality 40 mm, crushed stone aggregate for hard quality 40 to 63 mm, hand broken metal 25-90 m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25 m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvanize iron sheet 0.8 tick class 3, iron angle and pipe, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400 m.m., colour distemper primer, marble slab/platform 25m.m. thick double polished, galvanized mild steel tube medium grade 20m.m., galvanized mild steel tube medium grade 32m.m., galvanized mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, hire charge for vibrator surface, hire charge for vibrator needle, asbestos. cement sheet, centering(scaffolding), iron door, iron window, oil paint, uncost material carting trip, p or s trap 100 m.m. dia