Latest plastic coating Tenders | Government plastic coating Tenders

Central Government/Public Sector

CTN :40077304

15 May, 2025 NA

Multi City - Multi State

Tender For hot dip galvanizing as per rdso specs eti-ohe-13(4/84) on the set of ground connections drg. no. rdso/s3361-62 and the mass of the zinc coating shall not be less than 610 gm/sq.mtrs., including necessary surface preparation as per clause-4 of is:2629-1985 or latest.

corporations/Associations/Others

CTN :40059486

14 May, 2025 1.40 Crore

Ahmedabad - Gujarat

Tender For protective coating on existing exposed r.c.c.surface by solvent based silicone on bothbanks between subhash bridge and gandhibridge.

CTN :39888728

26 Apr, 2025 NA

Kochi - Kerala

Tender For corrigendum : procurement of inspection centric equipment. compliance of expression of interest document - magnetic particle testing (mpt) equipment along with consumables and dark room setup , digital depth gauge range: 0mm to 300mm , outside micrometer , digital insulation tester with multimeter , digital tape measure , digital bore gauge range: omm to 400mm , digital signal oscilloscope , surface coating thickness tester , tapered feeler gauge , snap gauge , radius gauge , 40/60 bronze dummy round , digital spirit level

CTN :39774896

21 Apr, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold ambuja ultratech accj k dalmia or equivalent , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63 to 90 mm , acc blocks of size 600x200x150mm make brikolite , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make tata sail jsw or equivalent , mild steel bars of size 10mm and above dia conforming to is 432 part i 1982 make tata sail jsw or equivalent , mild steel bars of size 12mm and above dia conforming to s 432 part i 1982 make tata sail jsw or equivalent , mild steel bars of size 16mm and above dia conforming to s 432 part i 1982 make tata sail jsw or equivalent , gi binding wire tata sail jsw , wooden plank for shuttering iind class wood of size 3x0 point 30x0 point 026m , acylic emulsion paint of approved brand on new concrete surface of make berger or asian or nerolac or equivalent , wooden scantling various size , oil bound distemper washable quality of proprietary brand of make berger or asian or nerolac or equivalent , wooden log for prep of size 3mtr long 100mm dia , synthetic enamel paint any colour make berger or asian or nerolac or equivalent , painting brush 4 inch isi marked , nails various sizes , ms rhs of size 80x40x3 point 2 , ms plate of size 8mm thick , ms nut and bolt of langth 100 mm fully thread suitable for 10mm dia nuts incl two nos of washer and 25 mm of shank and two nos of washer 3mm as per ts , pre painted galvatume aluminium zinc coating based corrugated steel sheet 0 point 50mm thick an colour having a tensile strength 550 mpa as per ts , ppgi ridge sheet of 0 point 63 mm thick of 90cm wide of make sail or tata jindal incl treating galvanised surface with mordant solution asper ts , self taping steel screw helf thread with rawl plug of 1 and 1point 2 inch 100 nos pkt , hdpe sand bags og colour of size 0 point 75x 0 point 375x 0 point 15 , door size 3x2 point 10m double leaf ms sheet for door 2mm thick frame 9 chowkat made of steel equal angle iron 55x55x6mm isi grade as per ts , door size 1 point 80x2 point 10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade as per ts , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isi grade grill made of tmt bar 12mm dia as per ts , gate size 3 mx 2m double leaf frame made of angle iron 75x 75x6mm isi grade with shutters made of reinforcement tmt bar 12 mm dia as per ts , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac or equivalent , white lime , water proofing compound confirming to is 2645-2003 make pidilite or dr fixit or fevicol or equivalent , cement based paint snowcem of make berger or asian or nerolac or equivalent , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 makebirla gold ambuja ultratech acc j k dalmiya or equivalent , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hard core 63 to 90 mm , bricks sub class b , three phase 1point 2 hp monoblock pump 430 volt complete and incl 3 mtr length required size flexible suction pipe foot valve as per ts , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia 2 point 5 mtr make jindal or tata or kalinga , insulating pvc block 75x75x3

CTN :40045676

08 May, 2025 10.00 Crore

Jodhpur - Rajasthan

Tender For 01(2025-26) item no. 01 cardiothoracic equipments and implants - titanium ligaclips small with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., titanium ligaclips medium with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., titanium ligaclips large with small diamond shape pyramidal heads, similar to needle holder inserts, ensuring a firm multi-directional atraumatic grip. interlocking atraumatic teeth designed for non-slip closure on the vessels. triangular shape of the titanium wire for the precision of the positioning of the clip into the jaws of the applier. should be us fda approved., proximal aortic anastomosis device. it should provide stable blood field. it allows for up to three anastomosis from one insertion. size 3.5mm/4.0mm/4.5mm, membrane oxygenator (plasma resistant) with integrated arterial filter. should have surface area with surface area of 1.4 m2. it should have radial blood flows design to give efficient gas transfer. it should have quick priming inlet and vacuum assisted venous drainage. oxygenator should have self-venting facility. integrated arterial filter should be polyester/polycarbonate/equivalent material. integrated arterial filter pore size should be less than 40 micron with the surface area of around 60-80cm2. priming volume of around of less than 285ml visible path top to bottom should have maximum flow for large body surface area patient ranging from 0.5 to 6 l/m. should have phosphoryl choline (pc) coating like phisio. should be able to operate at venous reservoir level of minimum 150 ml. oxygenator reservoir should have polycarbonate/polyester/equivalent screen type venous filter with pore size less than 50 micron. should be us fda approved. should be supplied with appropriate stand., uw solution for organ transplant use., dacron graft knitted bioseal grafts diameter 6mm to 8mm length 30 cm, dacron grafts knitted bioseal diameter 6mm to 8mm length 60 cm, dacron grafts woven bioseal diameter 20mm to 32mm length 30 cm, aortobifemoral bioseal graft dacron sizes - 6x12x45 / 7x14x45 / 8x16x45, coronary osteal cannula10fr/12fr/14fr, intra cardiac sump20fr/12fr, eptfe grafts plain straight diameter 6mm/7mm/8mm length 20 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 40 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 50 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 60 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 70 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 100 cm us fda approved, eptfe grafts plain straight diameter 6mm/7mm/8mm length 75 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 20 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 40 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 50 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 60 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 70 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 75 cm us fda approved, eptfe grafts ring reinforced diameter 6mm/7mm/8mm length 100 cm us fda approved, iodine impregnated incision drape, size 55cm x 45 cm (ahesive area). should be gamma sterilize. should be polyurethane adhesive coated surgical film with povidone iodine.

CTN :40028688

24 Apr, 2025 NA

Angul - Odisha

Tender For supply of electrical safety materials & safety gadgets to rhep, rengali-, insulating gloves(long) , working voltage: 1000v ac, acid, ozone, oil resistance, sizes: 9 & 10, , category: iii irreversible risks , in accordance with standards: , en 60903-2003, , make.- honey well , insulating gloves (short type), , working voltage: 1000v ac, acid, ozone, oil resistance, sizes: 9 & 10, ce , category: iii irreversible risks , in accordance with standards: , en 60903-2003, , make.- honey well. , insulating boots, class-0, 1kv ac, 1.5 kv dc, size-45, dielectric footwear should conforms with astm f1117 and is tested to astm f1116 at 20 kv, , make. honey well. , lv voltage detector, , based on iec 61243-3 standard & en 50110-1 european standard, checks voltage levels from-12-900 v ac, 1000 v dc, , make. honey well , hv voltage detector, based on iec 61243-3 standard & en 50110-1 european standard, checks voltage levels from 33 kv acto 220 kv ac , make-honey well , full body harness safety belt, minimum breaking strength-25 kn, confirming is 3521 standards, waist belt adjustable with shoulder straps, isi mark , make-honey well , industrial safety helmet, colour-white, complaint to indian standards is: 2925, isi marked on helmet, ansi/iseaz89.1-2014(r2019) make-venus/honeywell/karam , rechargeble led out ridertorch, make-havells/crompton/phillips , full face proection shield, make-venus/honeywell/karam , electrical insulating hand gloves for electrical works, type-2, working voltage: 1100volt, proof voltage-10000v, the gloves must incorporate high dielectric and physical strength, along with flexibility and durability as per is-4770, make- honeywell/raychem , oil resistance hand gloves, isi mark, approval: en420.2003, en388.2003, en374.2003. , make-venus/honeywell/karam , protective eye gear/ safety goggles: for eye protection (to be used in outdoor, 220kv switchyard)/ 33kv switchyard as well as while working in live electrical panels. isi mark(clear polycarbonate, anti fog, anti scratch, hand coating), , make-venus/honeywell/karam , gum boots-14" pvc gum boot:- as per is-15852 make-venus/honeywell/karam/udyogi , rain coats, esteem suit-shirt pant with polyester fabric with rubberized coating inside. isi mark(seamless tapping & pasting) make-duck back/acme , mechanical protection gloves, the gloves should be with cotton lining and special surface finish excellent ergonomics and grip qualities. as per is-3521 & en standard. make-, venus/honeywellukaram, safety spectacle, 99.9% uv protected clear polycarbonate isi mark, make-venus/honeywell/karam , ear muff for hearing protection, fordable type, high db, specification to be met: en 352-1:2002, isi mark, make-venus/honeywell/karam , pvc chemical resistance gloves, the gloves should be with cotton lining and special surface finish isi mark make-venus/honeywell/karam/isi mark , welding helmet, make-venus/honeywell/karam , welding goggles, make- venus/honeywell/karam , welding gloves, make- venus/honeywell/karam , welding arm guard, make-venus/honeywell/karam , welding apron, make-venus/honeywell/karam , hand pads, make- venus/honeywell/karam , rigger gloves, make-venus/honeywell/karam , corsal glass cover for face, make-venus/honeywell/karam , safety mask, nose mask with filter and as per isi make-venus/honeywell/karam , cutting goggles, make-venus/honeywell/karam , search light, 55w, led light, 1000 mtr rechargeable make-king lite/fos , insulating rubber gloves (33kv), en 60903-2003 iec 60903-2014, make-honeywel raychem , 11kv discharge rod, tested in general accordance wih of iec 60060-1/2010(cpri)-110 kv. make-honey well , 33kv discharge rod, tested in general accordance wih of iec 60060-1/2010(cpri)-110 kv, make-honey well , insulating 5steps ladder (foldable) make-youngman/m-safe , cone for barricade, (safety cone with square base) height 750 mm or equivalent and minimum 4 kg weight make-frontier/ h2 safety/venus/honewell , red ribbon(danger), (barricading tape)

CTN :40024731

08 May, 2025 NA

Sealdah - West Bengal

Tender For i)supply and application of hygiene coating at floor with 4mm pu crete flooring for solid bonding with the iron surface at non ac lhb lavatory for sdah depot based coaches.ii)supply and application of hi-build anti skid heavy duty food grade fire retardant epoxy flooring 2-3 mm in lavatory area of lhb coaches (both ac & non ac) & conventional coaches for sdah depot based coaches.

CTN :40024749

08 May, 2025 NA

Sealdah - West Bengal

Tender For i)supply and application of hygiene coating at floor with 4mm pu crete flooring forsolid bonding with the iron surface at non ac lhb lavatory for chitpur depot basedcoaches. ii)supply and application of hi-build anti skid heavy duty food grade fireretardant epoxy flooring 2-3 mm in lavatory area of lhb coaches (both ac & nonac) & conventional coaches for chitpur depot based coaches

State Government

CTN :40033750

23 Apr, 2025 24.26 Lacs

Kanchanpur - Tripura

Tender For maintenance of road from balanoncherra to joymoni para under jamupui hill sub-division during the year 2025-26 sh-pot holes repair, tack coat, carpeting, seal coating, surface drain, drain maintenance and jungle clearing etc.

State Government

CTN :40033777

23 Apr, 2025 17.46 Lacs

Kanchanpur - Tripura

Tender For maintenance of road from khedacherra duganga road to hamsapara road from ch.0.00km to ch.0.70km total length 0.70km under damcherra sub division, pwd r and b during the year 2025 2026 sh patch metalling,grouting,re carpeting, seal coating,surface d

Plastic Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government