Latest plastic core plug Tenders | Government plastic core plug Tenders

CTN :45083165

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l. no.98057054.scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, celling fan down rod, wagon door & body cutting part, driver seat assly., trough floor, electrode holder, cab window assly. psycostyle machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc, tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu,mvsi impeller,mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t. panel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss.qty-135mt.location-north of link road, east of inner boundary wall. condition-two days advance cutting is allowed for loading purpose only.

CTN :45086286

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - lot no.m.vehicle.exmp.gsd/kgp.05.2026-27.01 [8.001 + 0.500 (nvd) = 8.501 mt] approx. description- condemn motor vehicle (our offer) (i) condemned diesel hydraulic road mobile crane, cap-15 ton, m/s. escorts, chassis no. 1976005620, engine no. ktz905073=01 no. as in the lot in one place at ¿gsd/kgp. special conditions: (1) before bidding, all the bidders may inspect the lot and should satisfy themselves about conditions of lot. (2) loading will be done by purchaser¿s own arrangement. (3) lot will be delivered in number as per lot description as mentioned above, but not exceed total quantity 8.501 mt approximately. (4) on receipt of request for delivery from purchaser or his power of attorney holder along with certified copies of sro (sale release order). (5) cdms/1606/scrap yard/mkt/kgp will issue delivery program. (6) weighment of lorry i.e. tare & gross has to be done electronic weigh bridge at gsd/kgp. (7) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (8) all the delivery witnessing official is advised to read and understand the terms and conditions and satisfy by themselves before effecting delivery. in this regard necessary assistance may be given by cdms/g/gsd/kgp. (9) the body part of the vehicle should be loaded at last. (10) other terms & conditions are as per e-auction condition.

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government And Public Sector

CTN :45061647

19 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - s.m. scrap (comprising of iron drain cover, primary vertical damper, secondary lateral damper, yaw damper, foot rest, gangway bridge, cms of kiosk, iron of revolving chair, fire extinguisher, brake caliper, brake pad holder, slack adjuster, tail lamp, cut off iron scrap, fl fitting w/o accessories parts, battery charging terminal box, tools box, locker box, eft, foot board, supporting device, door closer, coach cutting, upper bunk, small seat iron, rusted chair, iron rake, gravity cock, insect killer, iron angle, board iron, iron sheet, rusted almirah, rusted. rack, battery box, battery container, mounting frame & miscellaneous s.m. scrap etc.. qty- 8.00 mt.

Central Government/Public Sector

CTN :45054873

11 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - condemned, broken, distorted, deteriorated and released unserviceable stainless steel (ss) scrap items cosnsisting of 1) used dust bins released from coaches 2) used dust bins (big). 3) bio toilet drum. 4) tissue paper holder, clip assembly, lach catch etc. 5) bmbc piston broken, entrance door handle, ss pipes, mug with chain. 6) miscellaneous ss items like small strip, elbow , pipe, nipple etc.

Central Government/Public Sector

CTN :45054874

11 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned overaged unserviceable released coaching and wagon ms items consisting of 1) ladder with foam coating. 2) demu filters. 3) control arm assembly with silent block. 4) control arm assembly without silent block. 5) buffer plunger with spindle. 6) brake pad holder/caliper. 7) lavatory door frame. 8) em pad /cc pad. 9) adaptor (wide & narrow jaw). 10) demo axle box cover plate. 11) axle box pivot bush/ silent block. 12) brake shoe. 13) slip assembly 14) control arm upper & lower 15) fall plate 16) axle end cover of lhb. 17) silent block of traction joint. 18) stiffener plate of lhb. 19) knuckle pin & drawbar pin. 20) pu cap base. 21) miscellaneous - operating handle, lock assembly, nut bolt, pipes, a/cocks, brake block keys & other minor items etc.

Central Government/Public Sector

CTN :45054994

13 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap unservicable 60 kg psc sleeper one sleeper steel weight = 15 kg approx qty. 3231 nos. 48.465 mts tms lot no. bpl/sse/pw/bpf scrap psc sleeper/17/25-26 dt 03.09.2025 note: 1. delivery given by number, handover is allowed for breaking, after breaking the sleepers debris should be cleared by the purchaser released steel wire&inserts will be effected as per rly.bd.letter dt-18.06.19. 2. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible.. 3. it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot.. 4. the purchaser will be responsible for the safety of his labour and other staff in railway premises.. 5. the purchaser will be responsible for any loss or damage of railway property wheather due to his negligence or otherwise during breaking the sleepers and delivery.. 6. similar and other type of p.way materials laying near by lot will not be delivered.. 7. psc sleeper scrap class standard weight of steel only.. 8. material can be moved by road within a lead of 30 mtrs. from stacking point.

Plastic Core Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector