Latest plastic washer Tenders | Government plastic washer Tenders

Central Government/Public Sector

CTN :40141300

12 May, 2025 10.81 Lacs

Champawat - Uttarakhand

Tender For supply of current transformer 33 kv , pin insulator with pin gi , 11kv goab switch vertical type complete , hand gloves for 11 kv , hex head s s bolt m 8 x 50 full thread , hex head s s bolt m 8 x 40 full thread with nut and double washer , hex head s s bolt m 10 x 50 full thread with nut and double washer , hex head s s bolt m 10 x 60 full thread with nut and double washer , hex head s s bolt m 12 x 50 full thread with nut and double washer , hex head s s bolt m 12 x 60 full thread with nut and double washer , hex head s s bolt m 16 x 75 full thread with nut and double washer , hex head s s bolt m 16 x 50 full thread with nut and double washer , hex head s s bolt m 16 x 100 full thread with nut and double washer , disc insulator 11 kv , transparent breather with silica gel 500 gm single piece acrelic , transparent breather with silica gel 1000 gmsingle piece acrelic. , fuse ht 10 amp , ht fuse 20 amp , lighting arresstor 9 ka 11kv , heat shrinkable tape for 11kv size 25mm , heat shrinkable tape for 11kv size 50mm , silica gel for air breather size 6 mm approx , installation of 11kv goab switch

Central Government / Public Sector

CTN :40122569

02 May, 2025 NA

Bhubaneswar - Odisha

Tender For supply of contact wire parallel clamp groove pg 1031-3 with gi bolt 16x50x38mm with nut spring washer, as per rdso drawing no. eti/ohe/p/1030-3, rev-a, ri no.1031-3. [ warranty period: 30 mo nths after the date of delivery ]

CTN :39858836

28 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of cement 43 grade opc , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90 mm graded , aac blocks of size 600x200x150mm , mild steel bars of size 8 mm dia , mild steel bars of size 10 mm dia , mild steel bars of size 12mm dia , mild steel bars of size 16 mm dia , ms binding wire , wooden plank for shuttering ii class wood of size 3.0 x0.3 x0.026 m , acrylic emulsion paint of approved brand on new concrete surface , wooden scantling various size , oil bound distemper washable quality , wooden log for prop , synthetic enamel paint , painting brush 4 inch , nails various sizes , ms rhs of size 96x48x4 , ms plate of size 8mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia , ppgi sheet 0.55 mm thick of size10ft x3 ft , ppgi ridge sheet of 0.63mm thick of 90cm wide , self taping steel screw half thread with rawl plug , hdpe sand bags og colour of size 0.75x0.375x0.15 , anti corrosive red oxide zinc chromate primer , white lime , waterproofing compound , cement based paint , door of size 3x2.1 mtr double leaf , ventilator with grill 600x450mm , birla white wall care putty , ceramic tiles of size 600x600mm , white cement , curtain arrangement , movable pvc panel 12mm thick , app based polymeric membrane , priming surface and applying bitumen , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete , mild steel bars of size 12mm dia , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , cement opc 43 grade packed , coarse sand free from vegetation , coarse aggregate 40mm graded , stone boulder 99 inch to 12 inch , pvc pipe 75mm dia 3 mtr long , distribution box 8 way double door spn 240 volts , mcb spn 240 volts 32 amps , mcb sp 240 volts 6 to 32 amps , pvc tape 19mm wide 5m long , cable pvc insulated electric 1.5 sqmm single core , cable pvc insulated of size 2.5 sqmm single core , cable pvc insulated 4 sqmm single core , pvc casing capping 1 inch , pvc casing capping 3 by 4 inch , switch piano type 5a 230v flush type one way , led tube light fittings 15w 230v , led mirror lights 1 feet 5 watts , screw 6x19mm isi marked , pvc switch board 6 inch by 6 inch , pvc switch board 7 inch by 4 inch , pvc switch board 8 inch by 10 inch , pvc l bend and t , modular switch socket combination 15a 230v , service bracket 40mm dia , service cable insulated aluminium conductore 10 sqmm 2 core , ceiling rose three terminal , led bulk head fittings high pressure die cast , pvc flexible wire copper conductor multi strandard , pvc flexible conduit pipe 15mm dia , pvc round or square block , exhaust fan of 230 volts 300mm seeep , fire exitingusher of 1kg capacity of dry powder type , earthing plate 600x600x6mm gi , ci earth pit cover of size 300x300x6mm with angle iron , funnel fitted with 20mm dia gi pipe 1.5m long , gi wire 4mm dia for earthing. , charcoal. , salt normal. , individual standalone plastic body smoke alarm , individual standalone plastic body heat alarm , fire ball extinguisher of 1.3 kg wt , study chair of size length 56 cm , study table , looking mirror of selected quality frameless , bid details/ 2 / 70 peg set of six , water dispenser of 230 v 500 watts , manual kero room heater 60cm height , labour charge

CTN :40141099

06 May, 2025 13.85 Lacs

Kanpur - Uttar Pradesh

Tender For supply of nickle coated snap fastner (four pieces) spring type 7/7 with plastic washer in bronzed black finish

Central Government / Public Sector

CTN :40122577

02 May, 2025 NA

Bhubaneswar - Odisha

Tender For supply of structure bonds (other than platform) along with fasteners (gi nuts & bolts & washer s) (16mmx50mmx38mm) made from m.s. flat steel with black painted & smooth edge (40mmx6mm) l ength : 3.5 mtrs and above as per rdso drg. no. rti/ohe/p/7000 mod. f or latest. [ warranty perio d: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40132330

05 May, 2025 NA

Bhubaneswar - Odisha

Tender For supply of gi bolt size 16 x 360 x 57 mm with nut lock nut & washer

Central Government / Public Sector

CTN :40122385

28 Apr, 2025 NA

Angul - Odisha

Tender For set of high tensile hex. headed bolt size: m16 x 75 x 2.0mm full threaded with g.i. coated a s per is: 1364 part-2, grade: 8.8, along with suitable m16 nut, grade 8.0, as per is: 1364(part-3), two flat w ashers as per is: 2016 and one spring washer as per is: 3063. makes: unbrako/ tvs/ lps/ dfl/ bmi. note: 1 ) firm must mention the make of the offered material while participating in the tender, otherwise liable for r ejection. 2) one sample set should be got approved before effecting bulk supply. 3) spring washer must be a type clockwise and left hand. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40121951

27 Jun, 2025 NA

Delhi - Delhi

Tender For supply of g.i. bolt & nut with check nut and flat washer size 16x220x110mm complete confirmi ng to rdso specification no. ti/spc/ohe/fasteners/ 0120 rev-1(march 2017) or latest. [ warrant y period: 30 months after the date of delivery ]

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

Plastic Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors