Latest plc control panel Tenders | Government plc control panel Tenders

CTN :43590859

27 Jan, 2026 NA

Lucknow - Uttar Pradesh

Tender For submersible pump set single phase with motor rating of 1.5 kilowatt, conformity to indian standard for submersible pump set-bis marked submersible pumpsets to is:8034 latest suitable for bore size100 mm, for use in borewells for handling clear cold water having motor isi marked to is:9283 latest of wet type for continuous rating synchronous motor,discharge capacity -0.5 lps, discharge head-100 meter,boresize -100millimeter,delivery size-32 millimeter, nos of stages for submersible pump-15, details of power supply-single phase,240 +/-10%volts,50hz,bee energy star rating-3star or above,with starter control panel-yes, warrenty 01 year or above as per attached gem specification [ warranty period: 30 months after the date of delivery ]

CTN :43581716

30 Jan, 2026 NA

Dantiwada - Gujarat

Tender For supply of hammer ball peen -0.25 kg , plumb bob -115 grams , wooden mallet 1 kg 75mm 15mm , conduit pipe cutting and threading machines adjustable -for 15 mm to 30 mm , conduit pipe bending machine, suitable -for 15 mm,18 mm, 25 mmand 30 mm pipe , hot wire ammeter -0-15 amps. , wheatstone bridge - , voltmeter m.c. -0-300 volts , voltmeter mc multi range 0.70- 150 -300 - 600 v , voltmeter m.c. multi range -0-15 30-50 and 75 v , voltmeter centre zero -15-0-15 volts , voltmeter m.i. multi-range -0- 150- 300-600 v , voltmeter m.i. multi-range -0-50- 75- 150 v , ammeter m.i. -0-30 amp panel board , ammeter mc -0 - 500 ma , autotransformer , solid state solar based single phase energy meter , ammeter m.c. centre zero -5-0-5 amp , ammeter mc -0 - 1 amp , single phase kwh meter analog -5a - 250 v ac , single phase kwh meter digital -5a 250 v ac , three phase kwh meter analog -25a - 415 v a. c , three phase kwh meter digital -25a - 415 v a. c , watt meter dynamo meter type -5 amps. and 250 v- 1.25 kw , magnetic flux meter -0-500 tesla , meter reading instrument , hydraulic crimping tool for ug cable crimping with bits -20 sq. mm to 250sq mm , crimping tool -heavy duty , small crimping tools , rubber matting -2 meter x 1 meter x 9 mm , wiring board on stand -3 meter x 1 meter with 0.5 meter projection on the top , set of wall jumper octagonal -37mm x 450mm and 37 x 600mm , pliers flat nose insulated -150 mm , pliers round nose insulated -200 mm , screw driver heavy duty -200 mm , screw driver heavy duty -300 mm , firmer chisel -1 inch , hammer ball peen -1.0 kg , hammer cross peen -0.5 kg , rawal tool holder and bit , scriber -150 mm , file flat -300 mm rough , file flat round -150 mm smooth , file round -300 mm 2nd cut , file triangular -150 mm 2nd cut , spanner set of 6 - double ended 18x18 - 20x22- 21x23- 24x27- 25x27- 30x32 , foot print grip -250 mm , hand vice -50 mm jaw , cut out relay -16a- 440v , reverse current relay -16a- 440v , insulators including hardware fitting -egg type , insulators including hardware fitting -suspension type , knife switch dpdt fitted with fuse terminals -16 amp , various lamps with fittings -halogen incandescent lamp , various lamps with fittings -fluorescent tube , various lamps with fittings - hp mercury vapor lamp , various lamps with fittings -high- pressure sodium lamp , various lamps with fittings -low- pressure sodium lamp , various lamps with fittings - floodlights , bus bar with brackets -1 mtr each , solar dc pump -24v, 1 hp , led lights -12v- dc- 5w , led lights -6 v- dc- 5w , solar charge controller with manual switch day lighting -6v-5 a , star delta starter -manual , star delta starter -semi-automatic , star delta starter -automatic , automatic reverse forward starter - , soft starter -1 phase , field regulator -0 - 1000 ohmic -2 amps , transformer single phase -1 k.v.a. 250 -100 v , d.c. compound motor -3 h.p 250 v with 4 point starter and field regulator , d.c. shunt motor -3 h.p 250 v with 3 point starter and speed regulator , d. c. series motor -3 h.p 250 v with 2 point starter and speed regulator , mg set consisting of squirrel cage induction motor 5 hp , immersion heater -1500 watt- 240v , mixture and grinder -750 watt- 240 v , dmx controller - dmx 512 , rewinding machine -manual , control panel -5 x 3 x 1.5 -foot , working bench -2.5 m x 1.20 m x 0.75 m //bid details 2 / 64

Central Government/Public Sector

CTN :43573628

26 Jan, 2026 3.41 Lacs

Betul - Madhya Pradesh

Tender For regular shifting of 500gpm, 100m head pump with complete accessories base frame, pump, motor, starter, valves, suction and delivery attachments for 12ls panel in lower workable seam of tawa ii mine pathakhera area.

CTN :43553892

20 Jan, 2026 2.42 Lacs

Shirahatti - Karnataka

Tender For supply and installation of 20hp motor,starter,panel board at ward no 02 haripur sump in shirahatti town limits.

State Government

CTN :43558207

27 Jan, 2026 5.87 Lacs

Karnal - Haryana

Tender For repair/ replacement of submersible/ horizontal pumping sets for tubewell/ booster consisting mainly of motor, pump electrical control panel, starter, cable and all accessories sluice valve, non return valves specials, lowering pipe etc. including all

State Government

CTN :43558208

27 Jan, 2026 3.94 Lacs

Karnal - Haryana

Tender For repair/ replacement of submersible/ horizontal pumping sets for tubewell/ booster consisting mainly of motor, pump electrical control panel, starter, cable and all accessories sluice valve, non return valves specials, lowering pipe etc. including all

State Government

CTN :43561085

24 Jan, 2026 NA

Malda - West Bengal

Tender For repairing of motor starter panel for pump no-iv of gr i pumping machinery at high lift pumping station of dariapur wtp within malda arsenic area water supply scheme (southern sector) under malda mechanical division, phe dte.

State Government

CTN :43567952

20 Jan, 2026 NA

Midnapur - West Bengal

Tender For day to day operation & guarding pumping machinery through automatic motor starter panel tube well ii of nayaput w/s scheme contai-i block in the dist. of purba medinipur. under midnapore mechanical division p. h. e. dte.

State Government

CTN :43340681

20 Jan, 2026 70.00 Lacs

Wayanad - Kerala

Tender For corrigendum : ridf xxviii - lift irrigation projects in various padashekharams of wayanad district- procurement of submersible pumpsets, fittings, accessories, and related electrical works - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses. - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses., supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontally mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day night operation.the pump discharge capacity of 230 cubic metre /hour against duty point head of 42 mtrs, working head range 18 - 47m, discharge range 136 - 57 lps ,speed 1450rpm(n) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an additional iron grill for preventing foreign particles inside the inlet side of the pump casing., supply and erection of 60hp auto transformer starter (ats) with suitable incommer and contactors including 24 kvar capacitor with required indications ,metering and protections for single phasing ,overload, pump monitoring unit to protect from ingress, high temperature level etc enclosed in a closed panel board, supply and laying additional termination cable of 1.1kv 3.5 core 95sqmm aluminium conductor xlpe insulated ;steel armoured ug cable as per relevant is 7098 with support for cable, supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontzlly mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day nightoperation.the pump discharge capacity of 188 cubic metre /hour against duty point head of 35 mtrs,working head range 16 - 42m, discharge range 102 - 42 lps ,speed 1450 rpm(n) or nearer ,with 10meters of copper power cable and control cable,railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided wi

CTN :43250168

20 Jan, 2026 1.51 Lacs

Holalkere - Karnataka

Tender For corrigendum : procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for malladhihalli grama panchayath for the year 2025-26. - axel blade(15f gp), motor 7.5 hp 14 stage(15f gp), cable 2.5sq(15f gp), ball valve 110 mm(15f gp), service shadel 75x25 mm(15f gp), service shadel 63x25 mm(15f gp), tee 75 mm(15f gp), tee 63 mm(15f gp), shutter lock(15f gp), body lock (15f gp), mk1 dolo 22a(15f gp), combination(15f gp), solvent 500 ml(15f gp), solvent 100 ml(15f gp), gi collor 3by4(15f gp), motor 6hp 8 stage(15f gp), copper wires(15f gp), mains wire 10 mm(15f gp), g i nipple 2x36(15f gp), g i nipple 2x48(15f gp), cap 2x8(15f gp), bore clamp 2 inch(15f gp), ready collor 90mm(15f gp), ready collor 75mm(15f gp), g i bend 2 inch(15f gp), g i pipe 1.25 inch(15f gp), flanz set(15f gp), no volt coil(15f gp), hand pump telescopic stand(15f gp), hand pump m10 boltnut(15f gp), hand pump lower valve(15f gp), hand pumpchain coupling(15f gp), hand pump connecting rod(15f gp), axle pin for hand pump(15f gp), hand cylinder bassem pump(15f gp), gi nipple(15f gp), ready collor(15f gp), nrv pandey(15f gp), g i bend 25 mm(15f gp), upvc pipe 3/4(15f gp), pvc reduce collor 2 inches(15f gp), pvc service handle 2.75 inches(15f gp), relay(15f gp), cable(15f gp), amps pause 63(15f gp), g i nipples 2 inch(15f gp), pvc collor 2.5 inch(15f gp), pvc collor 2 inch(15f gp), pvc collor 1 inch(15f gp), pvc bend 2.5 inch(15f gp), pvc bend 2 inch(15f gp), pvc bend 1 inch(15f gp), ams meter(15f gp), preventer(15f gp), auto starter(15f gp), upvc mta(15f gp), upvc fta(15f gp), upvc elbow 3/4(15f gp), upvc bend 3/4(15f gp), upvc collor 3/4(15f gp), upvc gums(15f gp), steel water taps(15f gp), motor pump 7.5 hp 14 stage starters(15f gp), pvc gum(15f gp), pvc reduced collor 2.5 inch(15f gp), g i collor elbow bend 2 inch(15f gp), g i pipe 2 inch(15f gp), motor pump 7.5 hp 10 stage(15f gp), elbow 3 inch(15f gp), elbow 2.5 inch(15f gp), elbow 2 inch(15f gp), elbow 1 inch(15f gp), pvc valve 3 inch(15f gp), pvc valve 2.5 inch(15f gp), pvc valve 2 inch(15f gp), pvc valve 1.5 inch(15f gp), pvc valve 1 inch(15f gp), pvc pipe 3 inch(15f gp), pvc pipe 2.5 inch(15f gp), pvc pipe 2 inch(15f gp), pvc pipe 1.5 inch(15f gp), pvc pipe 1 inch(15f gp)

Plc Control Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government