Latest plinth protection repair Tenders | Government plinth protection repair Tenders

CTN :40837691

15 Jul, 2025 NA

Purulia - West Bengal

Tender For design, drawing, concrete for foundation and plinth in all type of soil including hard/rocky soil (including excavation and supply of all materials viz., sand, cement, and ballast etc.) & erection, testing & commissioning of sini- purulia- muri section

CTN :40811582

14 Jul, 2025 NA

Samba - Jammu And Kashmir

Tender For tender for toilet block 9.76 mtr x 5.50 mtr with additional 1.50 mtr verandah i/c c/o plinth & foundation , recreation centre of 19.52mtr x 5.50mtr with additional 1.50mtr verandah i/c c/o plinth & foundation , go's accommodation of 19.52mtr x 5.50mtr with additional 1.50mtr verandah i/c c/o plinth& foundation , store room of 19.52 mtr x 5.50 mtr with additional 1.50 mtr verandah i/c c/o plinth & foundation , dining hall of 19.52 mtr x 5.50 mtr with additional 1.50 mtr verandah i/c clo plinth & foundation. , barrack (20 men) 19.52 mtr x 5.50 mtr with additional 1.50 mtr verandah i/c c/o plinth & foundation , office block of 19.52 mtr x 5.50 mtr with additional 1.50 mtr verandah i/c c/o plinth & foundation

CTN :40819210

30 Jun, 2025 8.06 Lacs

Silvassa - Dadra And Nagar Haveli

Tender For providing and supplying furniture for type - v / c bungalow at tokarkhada - providing and supply of emerald leather-pure leather center tilt mechanism, upright position lock. ai die cast pedestal (office chair), providing and supply aristo tbl 1200 x 600 (office chair), providing and supply gayle coffee table black (teapoy), providing and supply victoria coffee table walnut, providing and supply 205 wicker outdoor sofa set (model no.gc-205), providing and supply 203 wicker outdoor sofa set, providing and supplying wicker swing (zula), providing laying artificial lawm(6 mm), supplying and stacking of good earth at site including royalty and carriage upto 5 km lead (earth measured in stacks will be reduced by 20% for payment)., providing mirror polish to wooden furniture, providing and fixing 5mm mirror glass with polish, providing and fixing 5 mm bracket for glass fixing, replacing of dining chair leather with labour charges, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(b) dence or hard soil, providing and laying cement concrete 1:3:6 ( 1-cement : 3- coarse sand : 6- hand broken stone aggregates 40 m nominal size) and curing complete excluding cost of framework in (a) foundation and plith, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundation, footings, base of columns and mass concrete, brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional + extra for brick work in superstructure above plinth level upto floor two level (b) conventional, providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1-cement:3-sand), steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like, providing corrugated g.i. sheet of class-3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses.(1) 0.80 mm thick sheet., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm, providing and supplying for washing machine as approved by and engineer in charge, providing and supplying for wooden box bed (king size) as approved by and engineer in charge, providing and supplying for mattras (ortho 6") as approved by and engineer in charge, providing and supplying for side table as approved by and engineer in charge, providing and supplying for pillow as approved by and engineer in charge

corporations/Associations/Others

CTN :40820755

09 Jul, 2025 NA

Trichy - Tamil Nadu

Tender For providing foundation concrete structure and plinth and erection of steel structures and other electrical works for enhancement of power transformer capacity with 1 no additional 110 kv gc breaker at srimushnam 110 11 kv ss civil cum electrical.

State Government

CTN :40772511

26 Jun, 2025 9.65 Lacs

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material, design, erection, testing, commissioning for providing s.o.p. to newly constructed residential building at nift campus chebb at kangra under esd no. i hpsebl, kangra. - (a) material/erection of 11/0.4kv,250 kva s/stn., prov.distribution transformer (ordinary), 11/0.4 kv, 250 kva, prov.steel tubular poles (9 m, working load > 200 kgf/m ), prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, prov.ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov.x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for transformer bed, prov.x-arm [channel iron (100x50x5 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (35x35x6 mm), length : (460 ) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov.go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov.d.o fuse unit, prov.surge arrester, 9 kv station class (porcelain type), prov.discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12kv, 90 kn) including dead end clamps etc.), prov.pipe earthing set, lt distribution panel box with mccb(630a, 50 ka, 3p,1 no) and mccb(250 a, 36ka, 3p, 3 no.), prov.half clamp (m.s. flat 50x6 mm), prov.full clamps (m.s. flat 50x6 mm), prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], aluminium thimble, copper thimble 200 amp, danger plate, prov.barbed wire, prov.energy meter (3-phase,4-wire)dlms compliant 400/5a ct type, prov. aluminium paint., prov.aaac 7/3.15mm conductor for earthing, erection charges complete in all respect, transportation charges complete in all respect, (b)material/erection of 11 kv ht line, prov aaac 7/3.15mm conductor (50mm ) {includes cutting and wastage}, prov. steel tubular poles (9 m, working load > 200 kgf/m ), prov.m.s. c.i.x-arm (1500x100x50x5 mm), long for single pole, prov.m.s a.i x-arm (1800x50x50x6 mm), long for single pole, prov m.s a.i x-arm (50x50x6 mm), length (2x750) mm long for single pole, prov m.s a.i x-arm (50x50x6 mm),length (2x600) mm long for single pole, prov.m.s c. i cross arm (75x40x5 mm), length (2400) mm for g.o switch & d.o fuses, prov.belt set - ms a.i 50x50x6, length [2400 mm x 2 no.] for double pole, prov.x-bracing set - ms a.i 50x50x6, length [2700 mm x 2 no.]for double pole, prov 11 kv pin insulators (porcelain, 12 kv, 10 kn), prov disc insulator ,1 no disc (12 kv, 90 kn) including dead end clamps etc., prov ht earthing set complete, prov double continous earth wire (gi, 8 swg) @ 0.102 kg/m, prov danger plate (250x200x1.6 mm), prov nuts and bolts of various sizeswith flat and spring washers, prov barbed wire, prov aluminium paint, prov.full clamps (m.s. flat 50x6 mm), prov.xerox for chebb s/stn for scada, prov.d.o fuse unit, erection charges of 9 mtr st pole complete in all respect, erection charges of stay set complete in all respect, erection charges of coil earthing complete in all respect, erection charges of g.o. switch complete in all respect, erection charges of sagging aaac 7/3.15mm conductor, sagging of continous earth wire (gi, 8swg) @ 0.102 kg/m complete in all respect, transportation charges complete in all respect, commissioning of a 250 kva dtr plinth and fencing, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds o

corporations/Associations/Others

CTN :40801661

30 Jun, 2025 3.00 Crore

Junagadh - Gujarat

Tender For yearly rate contract for various items of construction and supply for sutrapada, dist. gir somnath (second attempt) - excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead b dense or hard soil, excavation for foundation for depth to 3.00 to 5.0 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter leadchard murrum, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidatind each deposited layer by ramming and watering, filling available excavated earthexcluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering., white stone bela masonary block in course in super structure with stone of approved quality in cement mortar 1jem51 cement 5 course sandincluding racking the joint etc. complete., providing laying controlled cement concrete mper200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforce concrete work in r.c.c. slab and landing, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls fpr interior plastering up to floor two level and finished even and smooth with a floating coat of cement slurry. cement mortar 1jem41 cement 4 sand, providing and laying reinforcement for r.c.c. work and bending andplacing in position completed p to floor two level thermo mechanical treated barscrsas per i.s. standard, 20 mm thick sand faced cement plaster on walls up to height 10 meters above ground level consisting of 12 mm thick backing coat of c.m. 1jem31 cementjem 3 sandand 8 mm. thick finishing coat of c.m. 1jem11 cementjem 1 sandetc. complete., providing and laying ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1jem31percementjem 3percoarse sandfinishing with flush pointing in white cement.up to 10 ton, providing and laying coloured glazed tiles of the size 300mm x 200mm x 8mm per300mm x 450mm x 8mm in flooring treads of steps landings skirting risers of steps anddado on 10 mm thick cement plaster 1jem31percementjem 3percoarse sandandjointed with white cement slurry., providing and laying 24x 24 vitrified 8mm thick tiles flooring over 20mmaveragebase of cement mortar 1jem61 per cementjem 6percoarse sandon new surface of fixing on existing flooring by adhesive materials including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing andcleaning the surface etc. complete for light shade, providing and laying granite slab in riser of steps dedo and pillars laid 10 mm thick cement mortar 1jem31 cement 3 sandand jointed with grey cement slurry including rubbing and polishing complete, providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1jem3 to plain or slope and to be tempered to bring mortar crme out up to surface using white cement including rounding off junctions and extending them up to 15cm along the wall clearing with water and oxalic acid etc. as directed, providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mmof jindal section nojem4605, wt 1.094 kg perrmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mmof jindal section nojem 8687 wt. of 0.695 kgmt,vertical member of size 61.85 mm x 31.75mm x 1.30 mmof jindal section nojem8758 wt.of 0.0.659 kgpermtwith sliding shutters of horizontal member size 40mm x 18mm x 1.29mmof jindal section nojem 8949 wt.

corporations/Associations/Others

CTN :40775610

02 Jul, 2025 NA

Coimbatore - Tamil Nadu

Tender For providing plinth foundation for various equipments, cable duct for 110 kv bay extension at the existing sipcot ii 110 11 kv ss

CTN :40793544

11 Jul, 2025 NA

Bathinda - Punjab

Tender For supply of supply of stores and erection of hardstanding of size 33m x 30m and 35 point 50m x 30m total 2055 sqm for 3 ton bearing capacity , design and erection of covered parking apron of size 25m x 20m x 6m ht with foundation and epoxy flooring and bird proofing all as per given drg and specification , supply of all mtrl and erection of chain link fence for length 80 mtr and ht 1 point 80 mtr , supply of all stores and erection of open genr shed of size 6m x 4m x 3 point 20 m hight , supply of stores and erection of external and internal electrification as per given drg and specification , supply of misc items drain and plinth protection and gi pipes as per given drg and specification

CTN :40794687

10 Jul, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of construction of a hard standing and an assembly shed , clearing jungle including uprooting of rank vegetation, grass, brushwood , earth work in excavation by manual means over area , caste in situ concrete work of nominal mix concrete , cast in suit plum concrete work of nominal mix concrete m10 , centering and shuttering incliding strutting propping etc and removal of foms for foundation , hard packed stone filling under floor in horizontal layer , providing and laying cement concrete mix over stone filling , plinth protection 50mm thick of cement concreate , 15mm cement plaster on the rough side of single of half brick wall of mix , distempering with oil bound washable distemper of approved brand and manufacture , electricity point flag pole bottom post and painting work complete

CTN :40782350

30 Jun, 2025 NA

Bhadrak - Odisha

Tender For providing and laying of concrete for foundation and plinth in connection with upgradation of electric traction system from 1x25 kv to 2x25 kv traction system for kharagpur( excl.)- bhadrak(excl.) section of kharagpur division of south eastern railway to meet 3000 mt loading target.

Plinth Protection Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others