Latest plywood board Tenders | Government plywood board Tenders

CTN :38601516

06 Jan, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of grinding wheel , liver , procelain and ceramic , pipe 40 inch , raxine green 6 into 8 , plywood 18 mm , 20 amp switch , 6 amp switch , caping casing , spray machine , acpl tops , plywood 12 mm 6 into 4 , touch wood fevicol spirit , technical entity inner modification , rely pasting oil and bolts , mcb 63 amp 2 pole with box , 15 5 amp switch combo frame

CTN :38588578

04 Jan, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of gum boot,plywood 8 by 4 by 6 mm,plywood 8 by 4 by 8 mm,plywood 8 by 4 by 10 mm,plywood 8 by 4 by 12 mm,plywood 8 by 4 by 19 mm,fevicol g s,round paper nos 60,round paper nos 80,round paper nos 120,masking tape,1by half inch screw,2 mm bit,emery paper 220 nos,putti bag 40 kgs,wood polish,touch wood,paint black,paint white,flank wooden 13 by 9 inch by 1 by half inch,photo frame clip,sanding saller,nc thinner,brush 1 inch,brush 2 inch,cutting blade 14 inch,cutting disk 5 inch,cutting disk 4 inch,welding rod 3 point 15mm,yellow paint,green paint,blue paint,red paint,turpline,1 by half inch nut bolt with washer 10mm,1 by half inch self tapping screw,1 by half inch nut bolt with washer

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

CTN :38506003

30 Dec, 2024 NA

Imphal - Manipur

Tender For supply of feet long 18w output 1600 lumens per watt with suitable powder coated frame end caps and connector , ceiling fan 1200mm sweep with electronic regulator conforming to is , vitrified ceramic coloured tiles of size 600mm x 600mm x 9- 10mm thick , white cement make birla jk , synthetic enamel paint high gloss superiour quality dark blue colour , synthetic enamel paint high gloss superiour quality blue colour , synthetic enamel paint high gloss superiour quality yellow colour , pedestal fan 400mm sweep make khaitan usha orient hevells crompton greaves , battery lead negative , battery lead positive , fan belt 5 kva genr set kirlosker , oil filter 5 kva genr set kirlosker , air filter assembly 5 kva genr set kirlosker , battery lead negative 5 kva genr set kirlosker , battery lead positive 5 kva genr set kirlosker , fuel pipe line tank to filter 5 kva genr set kirlosker , mcb 63 amp dp 240 volts make havells standard switch gear l and t legrand , fan belt 15 kva genr set kirlosker , oil filter 15 kva genr set kirlosker , air filter assembly 15 kva genr set kirlosker , battery lead negative 15 kva genr set kirlosker , battery lead positive 15 kva genr set kirlosker , fuel pipe line tank to filter 15 kva genr set kirlosker , exhaust fan 15 kva genr set kirlosker , ss wash basin , tullu pump 1.5 hp , gi binding wire 3mm dia , hdpe water storage tank cylindrical vertical with closed , mcb 32 amp dp 240 volts , cutting plier taparia , screw driver set , de spnr set , pvc solid panel plain colour door and frame made of 5mm thick , galvanised steel two strand barbed wire 2.24mm dia of wire 2 mm dia barbs at 75 mm spacing confirming to is 278 of 1978 , concertina coil 1050mm dia , tin cutter , standard wooden ballies 3m long dia not less than 100mm on either end , pvc pipe 1 inch , bib cock fancy type 15 mm long nozzle cp brass make cera somany jaguar plumber sona jindal , pad lock 65mm harrison brass 7 lever , brass hinges 100mm , nails rcc wall , pvc casing capping 25mm conforming to is make prestoteak prestoplast supreme , pvc elbow for casing capping 25mm conforming to is make prestoteak prestoplast supreme , mild steel tower bolt 100mm , floor door stopper aluminum 100mm , mild steel bow handle 125mm , measuring tape 5 mtr , bricks sub class b old size best locally available minimum compressive strength 75 kg oblic sqcm water absorption not more than 20 percentage , mild steel hard drawn wire mesh 50 x 50mm pitch 3mm dia of wire weight not less than 2.20 kg per sqm , mcb 20 kva genr 3 phase 63 amp , mcb 15 kva genr 3 phase 63 amp , plywood commercial 18 19mm bwr 8 feet x 4 feet , hdpe jar 20 ltr , distemper oil emulsion acrylic distemper make asian berger ici shalimar narolac , hdpe pipe 25mm , gi union socket 20mm bore isi marked , pp-r pipe pn-16 oblic dsr 7.4 20mm dia 3 layers - outer green uv stabilized middle black and inner layer microbial white colour isi marked vectus prince , pp-r gate valve 20mm dia make sfmc jindal welflow reliance vectus prince , pp-r pipe socket 20mm dia female threaded make sfmc jindal welflow reliance vectus prince , pp-r pipe union socket 20mm make sfmc jindal welflow reliance vectus prince , pp-r stop cock 20mm dia make sfmc jindal welflow reliance vectus prince , pp-r pipe reducer elblow 25 oblic 20 make sfmc jindal welflow reliance vectus prince , pillar cock pvc fancy type , gi nipple 20mm bore 50mm long , gi reducer socket 75 x 50 mm isi marked , gi reducer socket 120 x 60 mm isi marked , security light fitting for 65 watt led , search light , pedestal fan 600mm sweep make khaitan usha orient hevells crompton greaves , pvc switch bid details/ 2 / 82 board 8 inch x7 inch , pvc switch board 4 inch x4 inch , mcb 10 amp sp with enclosure box mild steel make havells standard switch gear l and t legrand , mcb 6amp sp 240 volts make havells standard switch gear l and t legrand , modular bell push switch 6 amp make anchor bajaj hevells philips , pvc switch board 8 inch x 4 inch , pvc switch board

Central Government/Public Sector

CTN :38492497

27 Dec, 2024 41.80 Lacs

Gandhinagar - Gujarat

Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a

CTN :38473826

27 Dec, 2024 NA

Jalandhar - Punjab

Tender For tender for supply of 10410696 c3 2340-000020 bicycle atlas marks tp 24 gent black co , 10418796 h3 5530-400112 ply wood for gen purposes mr-ab , 9 ply l , 10419825 f1 5110-001095 planes stanley no.45 , 10537352 h2 4020-000136 rope cott h/laid rot proofed undyed 8mm , 10597017 h4 8135-000033 paper wrapping kraft 1189 mm x 100 mm , 10420239 g1 5315-000664 nails steel wire round 100 mm x 5.0 mm , 10410849 g1 5315-000791 nail steel lath cut 2.0 x 6.0 x 20mm , 10308777 h2 4020-000149 rope jute hawserlaid 8 mm dia , 10309492 k6 7340-000038 spoon serving mk-2 , 10418735 h3 5530-400172 plywood marine 5 ply lxbxt 210 cm x 90 c , 10597055 g1 5315-000655 nails steel wire round 30mm x 2 mm , 10537321 h2 4020-000556 rope p/lene 3 strand h/l og 24mm dia , 10307922 k6 7330-000077 uc 45 m/set deg 280 mm lid , 10596992 f1 5110-000982 saws frame hhs adjustable type a 250-300

CTN :38473426

26 Dec, 2024 NA

Kupwara - Jammu And Kashmir

Tender For supply of sheet size 9x3 , window size 4x4 , door with frame size 7x3 , plywood 6mm size 3x8 , complete tilling

CTN :38365996

18 Dec, 2024 23.73 Lacs

Leh - Jammu And Kashmir

Tender For supply of sanitary stores - pp-r pipe pn 20 oblique sdr-6 3 layer with outer dia 32mm , pp-r elbow 90 degree plain outer dia 32mm with isi mark , pp-r male threaded elbow outer dia 32mm x 15 mm , pp-r tee reducer 40-32mm with isi mark , pp-r socket outer dia 32mm . , pp-r gate valve connector outer dia 32mm , silicon tape , corner shelf of toughned glass with chromium plated steel frame , pvc pipe 110mm 3 mtr long , pvc socket 110mm. , pvc p trap 110mm , pvc pipe 75mm 3 mtr long , cp towel rail 600 mm long 20 mm dia brass chromium plated with cloth hooks , alu tower bolt 75mm with isi marked , waste pipe for wash basin , m seal 200 gm pkt , ms binding wire not less than 0.9mm dia , cp bib cock long spout 15 mm , 32mm stop cock cp long neck , stop cock l type chromium plated brass 15 mm , stop cock t type chromium plated brass 15 mm , cp stop cock 20mm , chromium plated bib cock mixture long body , chromium plated cp brass pillar cock , pvc insulated connection 16mm dia 450mm long , pp-r wall clamp dia 32mm , distemper , plastic emulsion paint , waste pipe for urinal pot , jet spray complete , looking mirror frameless of size 600x450x5mm with 4mm ply baking , puf loft tank 300 ltrs , ewc seat cover , european wc with s or p trap concealed of size 650 x 405 x 770mm with sheet cover , stainless steel iwc of size 580mmx440mm with cistern 10 ltrs cap flushing cisterncomplete with entire accessories , vitreous china dry urinal bowl flat back water free odour free stain free white colour with coupling , looking mirror with pvc frame 21 inch x 15 inch , hdpe water storage tank 2000 ltr 3 layer , hdpe water storage tank 1000 ltr 3 layer , hdpe water storage tank 500 ltr 3 layer , adhesiver solution sr 505 , adhesiver solution sh , acrylic sheet 4 feet x 6 feet x4mm , bow handle oblique door handle , ppgi sheet 15 feet x 3 feet x 0.63mm , ppgi sheet 8 feet x 3 feet x 0.63mm , curtain rod steel , clamp for curtain , curtain ball , door stopper , fire extinguisher capacity 2 kg alongwith its accessories , fire extinguisher 1 kg ball type , fire extinguisher 4.5 kg , kero heater batti , nails assorted 0.5 inch to 06 inch , paint brush 4 inch , turpentine oil , sunmica sheet 8 feet x 4 feet x 3mm , plywood 8 feet x4 feetx4mm , plywood 6 feetx3 feet x12mm , plywood 8 feetx4 feet x12mm , plywood 8 feet x 4 feet x19mm , plywood 8 feet x 4 feet x 4mm one side sunmica lamination , plywood 8 feet x 4 feet x 6mm one side sunmica lamination , self threated star screw 1 inch , self threated star screw 2 inch , 8 mm self threaded screw 1 inch , 8 mm self threaded screw 2 inch , 8 mm self threaded screw 4 inch , screw full thread 1 inch 100 pieces , screw full thread 2 inch100 pieces , screw full thread 3 inch 100 pieces , screw full thread 4 inch 100 pieces , paint red oxide , synthetic enamel paint colour black in 20 oblique 10 ltr containers , synthetic enamel paint colour green in 20 oblique10 ltr containers , synthetic enamel paint colour red in 20 oblique10 ltr containers , synthetic enamel paint colour white in 20 oblique10 ltr containers , hdpe sheet 30ft x 30ft , peg stay for window , hinges 100mm make spider with isi marked , door hinges size 4 inch long medium weight steel , screw black color 1 oblique 2 inch , screw gypsum black color 1 inch , screw gypsum black color 2 inch , self taping screw 1 inch long , self taping screw 2 inch long , self taping screw 3 obiique 4 inch long , soap dish chromium plate , cement , hardcore 63 mm , trowel brick 250mm , star bit , pipe wrench 14 inch , aluminium a type step ladder 14 feet long , shovel hand gs 12 inch 1.6 kg with handle , pan mortar tasla 18 inch dia , cross and straight peen hammer 500 gm with bolt , sledge hammer 4 kg head. , ball pane hammer 500gm with isi mark , drill machine heavy duty , steel scissors for cutting sheets , hdpe sand bags , pvc chair with cushion , sliding bolt 100mm with isi marked make classic , wall panel 16.5 feet , ceiling panel 8.6 feet , partation panel 9 feet ,

CTN :38322788

27 Dec, 2024 NA

Bhopal - Madhya Pradesh

Tender For iehe invites online tender for supply of furniture (psychology department) - furniture, almirah steel shelving cabinets - almirah steel (conforming to bis specification is: 3312:2021 (with latest amendment)), type (almirah steel shelving cabinets),number of door (2), number of drawers (no drawer),number of shelves (4), colour of finish (prince grey),steel sheet material (crca sheets conforming to grade cri of is 513(part-1): 2016 ),almirah height (excluding the height of pedestal) 5 mm (1855 mm), almirah width 5 mm (910 mm),almirah depth 5 mm (480 mm), side sheet thickness (0.8 mm),back sheet thickness (0.8 mm), top sheet thickness (0.8 mm),bottom sheet thickness (0.8 mm),shelves sheet thickness (0.8 mm), hinges sheet thickness (1.25 mm (double folded)),width of stiffener (115 mm), stiffener sheet thickness (0.8 mm),handle size (12 cm), steel almirah lock/locker lock (six lever lock),material of lock (brass and steel finish),powder coating (conforming to is: 13871), almirah steel with glass door - almirah steel (conforming to bis specification is: 3312:2021), type (almirah steel with glass door),number of door (2), number of shelves (4),colour of finish (silver grey), steel sheet material (crca sheets conforming to grade cri of is 513(part-1): 2016 ),almirah height 5 mm (1980 mm (excluding the height of pedestal)),almirah width 5 mm (920 mm), almirah depth 5 mm (490 mm),side sheet thickness (0.9 mm), back sheet thickness (0.8 mm),top sheet thickness (0.9 mm), bottom sheet thickness (0.9 mm),shelves sheet thickness (0.7 mm),shelves supporting bracket thickness (1.6 mm), hinges sheet thickness (1.6 mm),number of glass sheet fixed (4), handle size (12 cm),steel almirah lock/locker lock (six lever lock), powder coating (conforming to is: 13871), sofas & couches, number of seats - furniture assembly (already assembled), sofa features (sofa cum bed),material (bamboo), dimensions and size: (),length (1800 inch), width (900 inch),height (yes),technical specifications: (), color (yellow),style (modern), number of seats (1),furniture assembly (already assembled), sofa features (sofa cum bed),material (bamboo), cantilever office chair non-revolving and non-tilting chair with armrest - chair type (non-revolving and non-tilting chair with armrest), chair understructure type (cantilever),understructure material (erw tube conforming to is : 1161 latest), the shape of tubular section of understructure (square),section size (diameter/sides) of understructure (19x19 mm), understructure wall thickness (mm) (1.6),castor (no),seat material (pu foam), density of pu used in seat (kg per cubic meter) (>30=40),thickness of pu used in seat (mm) (>30=40), minimum seat height from floor surface (mm) (>400=500),width of seat (mm) (>450), depth of seat (mm) (>450),seat upholstery material (leatherette),backrest base frame material (hot pressed plywood), backrest material (pu foam),density of pu used in backrest (kg per cubic meter) (>30=40), thickness of pu used in backrest (mm) (>30=40),width of backrest (mm) (>450), backrest height from the seat level (>450=550),backrest upholstery material (leatherette),armrest type (moulded armrest continuously fitted with seat & back), office chair non-revolving and non-tilting chair with armrest- chair type (non-revolving and non-tilting chair with armrest),chair understructure type (legs), understructure material (erw tube conforming to is : 1161 latest),the shape of tubular section of under structure (round), section size (diameter/sides) of under structure (22 mm),understructure wall thickness (mm) (1.6),castor (no), seat material (moulded pu),density of pu used in seat (kg per cubic meter) (>30=40), thickness of pu used in seat (mm) (>30=40),minimum seat height from floor surface (mm) (>400=500), width of seat (mm) (>400=450),depth of seat (mm) (>400=450),seat upholstery material (leatherette), backrest base frame material (hot pressed plywood),backrest material (moulded pu), density of pu used in backres

Plywood Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector