Tender For supply of 5/2 direction control valve cd12-5/2xx-do-go-12-go12-go18-s st. code: 1.1.6.39 mdc id:5 3618640 & part no: 5711000100 (double air pilot) as per the enclosed technical data & information. m ake-westinghouse, aventics or similar. [ warranty period: 30 months after the date of delivery ]
Tender For supply of double acting hydraulic cylinder , aluminium block cylinder double acting , pressure switch model kp 35 , temperature switch model kp 81 , pressure switch model dg34 , pressure switch model dg35 , hydrualic oil filter unit model 16ra90g25rr mv34p , solenoid operated direction control valve
Tender For standing order/rate contract for supply of instrument materials on door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar. - load cell 100 kg strain gauge type, make-avery/ perciamoleen, 4 load cell junction card 4 input 1 out, make-avery/ perciamollen, signal isolater optical isolation type signal input/output 4-20 ma supply 18- 260 vac/vdc, make-radix, signal converter 0-5 a to 4-20 ma supply voltage 18-240 vac/vdc, make-radix./masibus/ p&f, zss controller with its proximity supply voltage 230vac, make-masibus, hall s effect type top roller lift sensors (asd-he-trls-10) and indicating transmitters (asd-he-trlit-1005-1-2), make-yu tech, infra red type donnelly chute level sensors, indicators & transmitters, make-yu tech, hall s effect type cane blanket level sensors( asd-he-cbls-10) and indicating transmitters (asd-he-cblit-1005-1-2), make-yu tech, pressure transmitter strain gauge type range 0-16 kg/cm2 output 4-20 ma loop powered processe connection 1/2 inch male threaded, make-honywell/ypkogawa, on off controller input signal universal, 2 relay output on set point, make-honywell, size 96x96 supply 230vac, weighing controller/ indicator for beltscale model no=40 bs, make-percia mollen, directional control solenoid operated valve (ng10): 4we 10 d a01-24dg/v, make-hydac, direction control valve, solenoid operated (ng6) type: 4we 6 d a01-24dg/v, make-hydac, pressure relief valve sandwich plate type for ng06(4we 6 d a01-24dg/v), pressure range 210 kg/cm2flow 120 l/min, manual adjustment, fkm sealing, make-hydac, electronic pressure indicator cum transmitter range 0- 300 kg/cm2 model no eds 3000, make-hydac/ above equivalent, make parker, strain gauge type dp switch across filter, make-hydac/ parker, pnp pproximity switch 2 wire range 15 mm od 15 mm male supply 24 vdc p&f, lvdt range 0-1100 mm probe od 10 mm 1/2 inch threaded connection, out put 4-20 ma model no. c01-1100-000 make hydac/ above equivalent, make-mts, model no. rhm1185md601a01, level indicator cum transmitter loop powered output 4-20 ma range 1000mm fluid hydaulic oil, make-parker, part no. 110558, model no. hblt-a1-6u, digital temperature indicator cum transmitter head mount range 0-100c probe od 8 mm loop powered output 4-20 ma, make-hydac/ parker probe length 700mm, solenoid coil connector 4 pin with led indicator, size-20mmx20 mm, lvdt probe connector with 10 mtr cable lid connector type 6 pole, m16 din female type, make-any reputed, plug in power relay with base, coil voltage 24 v dc model no my2n, make-omron, rtd pt100 type length 500mm od 6 mm, temperature transmittercum digital indicator remote field mounting input universal, loop powred, output 4-20 ma, make-rosemount/ honywell/abb/ yokogawa/p&f, 8 channel rtd transmitter input rtd pt100( field interface boards 8 channel linearized rtd/tc input), output 4-20 ma model no-mas-ai-u-o8d-9-1-0, make-masibus, pressure transmitter lvdt type range minus 2 kg/cm2 to 16 kg/cm2 loop powred output 4-20 ma 1/2 inch female threaded process coneection, field mounting hart enable, make-abb/ emerson/ rosemount/ yokogawa, diffrential pressure transmitter range minus2 kg/cm2 to 5 kg/cm2, field mounting process connection 1/2 inch ntp female threaded loop powered 4-20 ma, output hart enable, make-abb/ yokogawa/ rosemount/ emerson, diffrential pressure transmitter range minus 2 kg/cm2 to 2 kg/cm2, field mounting process connection 3 inch flanged diapharm type at higher side loop powered 4-20 ma, output hart enable, make-abb/ yokogawa/ rosemount/ emerson, diffrential pressure transmitter range minus 2 kg/cm2 to 2 kg/cm2, field mounting process connection 3 inch flanged diapharm type at both side 4 mtr capilary, loop powered 4-20 ma output hart enable, make-abb/ yokogawa/ rosemount/ emerson, perssure gauge burden tube type range 20 kg/cm2 dial size 6 inch process connection 1/2 inch ntp male threaded, make-warri/ hguru, perssure gauge burden tube type range 10 kg/cm
Tender For bid to ras supply of tc 00870 gp bucket assy with hd tooth , 4274663 control cable , tb20525 pilot piping , te22613 control cable , te23840 lub oil filter , te24191 switch rocker speed selection , zc00000097 work lamp boom lamp , te25707 cable battery , nub98366 wiper blade , ya00010380 wiper motor , te26032 hose pilot , te26034 hose pilot , te26033 hose hyd , te22614 hose nylon , 4631976 filter oil hyd pilot , td20346 solenoid direction control valve , 4294186 hose rubber , te20210 hyd filter , te02375 hose with protection , 4207841 element filter , te09149 ignition switch , te26134 hose hyd , te25999 acc cable control , ta20430 instrument cluster , nk silicon for glass , nk distilled water for bty , 14280500501 clamp 1 , 4717166 clamp 2 , 9451037407 fuel filter element
Tender For supply of 3/2 direction control valve,571 110 030 0 ng 12 or cd 12-3/2nc-sr-g0 12-g0 12-g0 18-s, ma ke- aventics. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : annual maintenance contract for repair and maintenance of fire fighting equipment at erpl, rajbandh - amc for repair and maintenance of f&s eq, carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, clea ning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( iocl supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of eic inclusive of al l tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the eic/ si te engineer and submitting the reports of the inspection as per hse manual format (payment of spares not supplied by iocl shall be m ade as per respective items), for 10/9 kg. capacity dcp extinguisher, for 75/70/50 kg. capacity dcp extinguisher, for 4.5 kg. capacity co2 extinguisher, for 6.5 kg. capacity co2 extinguisher, for 2 kg capacity clean agent extinguisher, monthly: checking, inspection, maintenance, greasing, cleaning, oiling, replacement of disc washer, blank cap if any including compl ete overhauling etc. of double headed hydrant valves alongwith all tools, tackles, manpower, material etc. payment for disc washer, coupling washer & blank cap shall be made separately., supplying and fitting of hydrant disc washer as per directions of engineer-in-charge, supplying and fitting of fire hydrant/ fire hose coupling washer, supply and fitting of blank cap (as per is 5290 , red colour with gi chain) suitable for 63 mm hydrant outlet as per direction of ei c, supplying & fitting spindle assembly (gunmetal), repair of adaptor lug of hydrant/ hose inclusive of tools tackels & labour etc., monthly maintenance of 750 gpm monitors: oiling & greasing through grease nipple provided on bearing, worm wheel and worm shaft, cle aning, performance checking for complete vertical and horizontal movement, nozzle movement, water throw, foam suction, ensuring prop er tightning of flanges, clearing the debris around the nozzle etc as per approved procedure including tools & tackles, report submi ssion complete as per direction of site engineer / eic. water resistant low friction synthetic grease, grease gun and all other cons umable etc shall be arranged by vendor. after testing, afff jerry-can must be positioned and replinished near monitor including shif ting, transportation etc., cleaning, maintenance and repair of water cum foam monitor nozzle for fog jet operation by opening and dismantling of nozzle cleanin g by rustoline or kerosene of all the components thoroughly, further inspection of internal parts in the presence of the engineer-in -charge, repair/reconditioning by hand facing, machining, grinding, lapping, etc. and greasing,& reassembly in foam monitors as per direction of eic inclusive of necessary tools, tackles and labour., opening of blind flange of water curtain system of control building, sr tank cleaning of water line, dechoking of spray nozzles, ref ixing it with after testing with new gasket.etc of water spray system of all buildings (on monthly basis) including nozzle dechoking , strainer cleaning and all labour, tools & tackles complete as per direction of the site engineer/ eic. (rates per blind opening), valve maintenance : checking, inspection, greasing, cleaning, oiling etc. of all fire water valves, of all sizes upto 14" including grease and all labour, tools & tackles complete as per direction of site engineer / eic and provided by contractor. all such valves shall be fully closed and opened and restored in origional condition as per advise by eic/ site engineer.note: the valve sizes may vary from 3" to 14". rates are per valve., hydrotesting of fire fighting delivery hose of dia 63 mm on half-yearly basis (type a and b ) by making arrangement of hydraulic pum p, blind, shifting from plant area, bui
Tender For supply of 5/2 direction control valve cd12-5/2xx-d [5/2 direction control valve cd12-5/2xx-do-go-12-go12-go18-s st. code: 1.1.6.39 mdc id:53618640 & part no: 5711000100 (double air pilot) as per the enclosed technical data & information. make-westinghouse, aventics or similar.]