Latest pole clamp Tenders | Government pole clamp Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

CTN :38572159

27 Dec, 2024 2.00 Lacs

Medininagar - Jharkhand

Tender For supply of led street light and its accessories - item description, led street light 90 w philips / surya/ havells/ bajaj, 32 mm dia(inner dia of pole arm)x 2 mtr long gi pipe (medium class)pole arm bracket for mounting of led street lighting fitting on pole including bending the pipe to required shape (90-105 degree),2 nos. 40mmx 3mm flat iron clamp withs nuts, bolt & washer, gi coating the flat iron with primer and finished paint as per relevant standard specifications., led driver (35 w), led driver (50 w), led driver (70 w), led driver (110 w), led driver (120 w), pcb 70 w, pcb 120 w, 1 core copper wire (1.5 sqmm), 1 core copper wire ( 1 sqmm), 2 core aluminium wire ( 2.5 sqmm), 2 core aluminium wire (6 sqmm), 2 core aluminium wire (10sqmm), switch (6 amp) with gang box, pvc tape, rope light, rope light connector, hand gloves(electrical work), plier, screw driver, tester

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :38521123

21 Dec, 2024 5.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : supply of various material for anurakshan mah october-november 2024 under edc-i, mathura - aluminium binding wire (5 & 6 mm dia), lt clamp with nuts & bolts of pcc pole with neutral, lt shackle insulator, bolts & nuts for shackel, neutral cum earth wire gi wire 7.16 mm or 6 swg, aluminium jointing sleave for aaac conductor weasel/rabbit, aluminium jointing sleave for acsr conductor weasel/rabbit, spacer lt pvc, alluminium lug bolted type, alluminium crimping lug 400 sqmm, alluminium crimping lug 240 sqmm, alluminium crimping lug 150 sqmm, alluminium crimping lug 120 sqmm, al. pg clamps weasel to weasel, al. pg clamps dog to dog, suspension clamp for ab cable (various size), tinned copper fuse wire (various size), silica gel

CTN :38588568

04 Jan, 2025 NA

Belgaum - Karnataka

Tender For supply of supply of 4 zone standalone fire alarm control panel with lcd display and zone wise contact and sounder,supply of abs manual call point with key break,supply of abs sounder,supply of response indicator dual led,supply of optical photo or smoke detector with base,supply of heat combination ror and fixed temp detector with base,2c armoured cable,single red wire,single black wire,pvc 19mm pipe,pvc c clamp with nail,miscellaneous material such as pvc tapes gi wire etc,transportation of material and freight and cartage outwards,labour charges for entire cabling work overhead and wall clamping,installation of main 4 zone fire alarm panel smoke detectors abs sounders manual call points responsive indicators etc programming and testing charges

State Government

CTN :38589201

07 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of sec clip w_r type,clamping angle,clamping angle,bull dog clamp stainless steel grade 304 u clamp size 12 mm with inner dia 13 mm along with 10 mm nut and m10 spring washer,ss bolt dia 12x50_45mm,ss nut dia 16mm,copper split pin dia 4x40mm,g i bolt dia 24x70_54mm,g i bolt dia 16x100_38mm,g i bolt dia 16x260_57mm,g i bolt dia 16x260_60mm,g i bolt dia 16x360_57mm,g i bolt dia 16x65_38mm,g i bolt dia 16x260_100mm,g i bolt dia 16x360_80mm,g i bolt dia 16x360_100mm,g i bolt 16x50_37mm,g i bolt 16x320_100mm,g i nut dia 16mm,g i nut dia 20mm,g i lock nut dia 16mm,g i lock nut dia 20mm,g i flat washer dia 10mm,g i flat washer dia 16mm,g i flat washer dia 20mm,gi punched washer 22 mm,g i spring washer dia 10mm,g i spring washer dia 16mm,g i bolt dia 20x50_46mm,g i bolt dia 20x280_65mm,g i bolt dia 20x210_65mm,g i bolt dia 20x310_65mm,g i bolt dia 20x550_65mm,g i bolt dia 20x65_46mm,g i bolt dia 20x85_46mm,g i tappered washer dia 16mm,g i tappered washer dia 20mm,gi bolt 10x35_30mm,gi dia 10mm nut,gi 24mm dia lock nut,s

State Government

CTN :38421009

19 Dec, 2024 NA

Nainital - Uttarakhand

Tender For corrigendum : supply of de-centralized material for estimate work of 11 kv line for underground work at railway station ramnagar - supply of holding clamp sp33 with nut & bolt., supply of holding clamp for sp-55 with nut & bolt., supply of bracing clamp top sp-55 with nut & bolt., supply of holding clamp fpr gi pipe 8/10& ms ch., supply of stay clamp for sp-55 with nut & bolt., supply of stay clamp for sp-33 with nut & bolt., supply of gi pipe dia 150 mm., supply of h.d.p.e pipe 50mm.

corporations/Associations/Others

CTN :38588806

24 Dec, 2024 NA

Firozabad - Uttar Pradesh

Tender For supply of tree pruner,battery operated cutter,three by four manila rope 20mtr long,1 inch manila rope 20mtr long,tirfor 3 or 5 ton,tirfor 1.6 ton,pull lift 1.6 ton,pull lift 0.75 ton,catenary wire come along clamp,feeder type come along clamp,steel sling 01 mtr fibre reinforced,steel sling 02 mtr,steel sling 03 mtr,steel sling 10 mtr,1 inches d shackle,one by two inches d shackle,torch light 3 cells,led torch light,gi wire 85 swg,crow bar,helmets,rubber gloves,rachet clamp with bit,d spanner size 6 by 7 to 30 by 32 mm,ring spanner size 6 by 7 to 30 by 32 mm

corporations/Associations/Others

CTN :38513929

21 Dec, 2024 8.66 Lacs

Prayagraj - Uttar Pradesh

Tender For supply of material and erection for installation of additional 5 mva t/f at 33/11 kv s/s jari distt. prayagraj in business plan 2023-24 on semi turnkey basis under edc-i, prayagraj - supply, carriage & erection of materials for installation of add. 5 mva t/f at 33/11 kv s/s jari distt. prayagraj, a- supply of de-centralised materials, control cable 4x2.5 mm2, control cable 2x2.5 mm2, 11 kv cable jointing kit 120 mm.sq., 11 kv cable jointing kit 185 mm.sq., rabber matting, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp for pcc pole, dropper channel clamp for pcc pole, g.i. strips of size 35x6 mm, g.i. strips of size 50x6 mm, g.i. pipe 2" dia, b- carriage of following material, pcc pole 8.5 mtr. long-2 no., structure of la, isolator, 33 kv cts, single t/f control pannel, 1 no.11 kv outgoing and 1 no. incoming pannel, battery & battery charger and 33 kv vcb etc., c- erection work, construction of complete t/f plinth size 3mx3m x1.05 mtr. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation made as per drawing.) top of plinth is to be c.c. work in the ratio of 1:3:6 fitted with 3 mtr. long, 90 lbs, 2nos. rail pieces. cement mortar is to be used in 1:3 ratio. cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6 stone grit is to be laid before foundation start for whole plinth. except rail pieces all material shall be provided by the contractor ., erection of complete structure and 33 kv bus isolator in switch yard as per respo drawing. work also includes construction of plinth of size 0.45x0.45x1.0 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of complete structure and 33 kv lightening arrestor in switch yard as per respo drawing. work includes erection of 3 nos.33 kv lightening arrestor, its fitting and mounting with care. grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x0.90 cum. plastering the plinth with cement mortar with cement and sand in ratio 1:4. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of 33 kv post insulators with complete structure in switch yard as per respo drawing. work includes installation of 1x3 nos. 33 kv post insulator on structure complete as per schedule, grouting of structure with ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x0.90 cum. the work is to be done strictly as per respo drawing. all the material like post insulator cap, cement, concrete material used for above work will be provided by the contractor., erection of complete 33 kv vcb with structure 0.7x0.7x1.0 cum. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation or made as per requirement.) in switchyard and grouting of vcb structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of vcb on structure carefully with making all connections of control cable for operating the vcb . all other item like cement, concrete material, t&p shall be provided by the contractor., erection of complete 33 kv c.t (03 no) with structure (0.45x0.45x0.90) cum. in switchyard and grouting of c.t. structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of c.t. on structure carefully with making all connections of control cable . all other item like cement, concrete material, t&p shall be provided by the contractor., installation of 11 kv single transformer control pannel, 1 no. incoming and 1 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with com

corporations/Associations/Others

CTN :38513944

21 Dec, 2024 8.66 Lacs

Prayagraj - Uttar Pradesh

Tender For supply of material and erection for installation of additional 5 mva t/f at 33/11 kv s/s karchana distt. prayagraj in business plan 2023-24 on semi turnkey basis under edc-i, prayagraj - supply, carriage & erection of materials for installation of add. 5 mva t/f at 33/11 kv s/s karchana distt. prayagraj, a- supply of de-centralised materials, control cable 4x2.5 mm2, control cable 2x2.5 mm2, 11 kv cable jointing kit 120 mm.sq., 11 kv cable jointing kit 185 mm.sq., rabber matting, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp for pcc pole, dropper channel clamp for pcc pole, g.i. strips of size 35x6 mm, g.i. strips of size 50x6 mm, g.i. pipe 2" dia, b- carriage of following material, pcc pole 8.5 mtr. long-2 no., structure of la, isolator, 33 kv cts, single t/f control pannel, 1 no.11 kv outgoing and 1 no. incoming pannel, battery & battery charger and 33 kv vcb etc., c- erection work, construction of complete t/f plinth size 3mx3m x1.05 mtr. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation made as per drawing.) top of plinth is to be c.c. work in the ratio of 1:3:6 fitted with 3 mtr. long, 90 lbs, 2nos. rail pieces. cement mortar is to be used in 1:3 ratio. cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6 stone grit is to be laid before foundation start for whole plinth. except rail pieces all material shall be provided by the contractor ., erection of complete structure and 33 kv bus isolator in switch yard as per respo drawing. work also includes construction of plinth of size 0.45x0.45x1.0 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of complete structure and 33 kv lightening arrestor in switch yard as per respo drawing. work includes erection of 3 nos.33 kv lightening arrestor, its fitting and mounting with care. grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x0.90 cum. plastering the plinth with cement mortar with cement and sand in ratio 1:4. all concreting material like cement, ballast, sand labour & t&p etc.shall be provided by the contractor., erection of 33 kv post insulators with complete structure in switch yard as per respo drawing. work includes installation of 1x3 nos. 33 kv post insulator on structure complete as per schedule, grouting of structure with ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x0.90 cum. the work is to be done strictly as per respo drawing. all the material like post insulator cap, cement, concrete material used for above work will be provided by the contractor., erection of complete 33 kv vcb with structure 0.7x0.7x1.0 cum. (0.3 mtr. above the ground level and 0.75 mtr. deep foundation or made as per requirement.) in switchyard and grouting of vcb structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of vcb on structure carefully with making all connections of control cable for operating the vcb . all other item like cement, concrete material, t&p shall be provided by the contractor., erection of complete 33 kv c.t (03 no) with structure (0.45x0.45x0.90) cum. in switchyard and grouting of c.t. structure by cement, sand, brick ballast mortar in ratio 1:3:4. work includes complete fitting of c.t. on structure carefully with making all connections of control cable . all other item like cement, concrete material, t&p shall be provided by the contractor., installation of 11 kv single transformer control pannel, 1 no. incoming and 1 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect

Pole Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others