Latest pp seal Tenders | Government pp seal Tenders

CTN :40557087

20 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For supply of bolt, key wood ruff, adaptor(e3-20-1 by 8), oil seal pilot bearing, kit shim 72.5 odx 65 id (plate xxi c), guide hose lh (plate vi ac), spring torsion, adaptor, kit shim 79.5 od x 72 id (plate xxi c), kit shim 64.5odx 57 id (plate xxi c), rubber pad 30x20x12 (plate iv h), nut 1-1 by 2 inch unf x 27.5 thk, spring steel bush (44.8 odx3), shim, cover battery (plate viii e), cap steering wheel (plate xii f), adaptor 39.5mm long. m by m 1 by 2 inch bsp x 7 by 8 inch sae lvb (, adaptor (plate xiv b), adapter, washer hardened fit under it.2 (jcb super plate , clip worim drive, clip p-clip, 25mm dia (jcb super plate xxi h), bolt banjo, bracket throttle (plate xxiv c), plate sealing (plate xxviii a), seal, washer rebound 16x80x6(plate iii l), key 2.2 mm (plate iv a), seal top ratl window (plate iv t), spacer 50mmx115mmx5.5mm, spacer main shaft seal, screw bleed (plate xxi c), adaptor, hose, baffle pre filter (plate xxx a), hose 400mm (plate xxx b), cap, cover rear steering column (plate xii e), cover steering column front (plate xii e), adaptor 5 by 8 inch bspx1 by 2 inch bsp m m, spacer 50mmx115mmx6.0mm, light number plate, seal door(plate iv u-4), nut rivet m8 (plate iv ao), bolt gr-8.8m12x130 long, spacer (plate v i), bush spring 51.2odx44.8idx70 long, seal, pin boom lock (plate vi v), blanking disc(b4-1-1 by 04), bracket support (jcb super plate xiii p), adapter includes o ring (plate xv c), adapter (plate xv c), spacer 50mm x 115mm x4.5mm, circlip (plate xxi e), dipstick (jcb super plate xxi h), rubber hose 6x12x800 (plate xxiii b), plate master cylinder adapter (plate xxiii c), clip jubille, bracket side panel mounting (plate xxviii b), adaptor lvb (jcb super plate xiii d), mounting rubber, clamp gear lever gaiter (plate x v), ring clamp load (plate x x), adjusting nut, pad wear, lower (plate iii i), pin (plate iii y), mounting bracket fuse (plate iv c), guard hose rh (plate vi e), micro relay change over 12v, micro relay n o 12v, clevis lh thread (plate x d), washer thrust (jcb super plate xii d), adapter g3 by 8a-7 by 8 unf(m)(jcb super plate xiii f), pipe support (jcb super plate xiii p), adaptor (plate xv c), seal(e4-3-5), spacer 50mm x 115 mm x 3.5 mm, spacer lay shaft od 72.5x id 63.5 (plate xxi c), pipe assy 4wd(plate-f5-5-10 by 43), clip 9.5mm dia., pinch type (jcb super plate xxi, thrust washer side gear, needle thrust brg, light interior(c3-10-1), mounting bracket fan (plate iv aj), bush (b3-2-2), liner bearing(ispl sl no-488), knob with switch (plate x v), tee-adaptor, adapter (plate xv c), spacer 50mm x 115mm x4.0mm, plate counter (jcb super plate xxi f), boot air pre cleaner (plate xxvi a), jubilee clip, guide rh (plate vi ac), pad wear, lower fix (plate iii h), plug locking (plate iii i), mounting roof liner assy rear (plate iv f), bush spring 51.2odx44.8idx70 long, hose tank side (jcb super plate xiii h), spacer 50x115x5mm(f1-3-1 by 02), circlip internal (f5-1-30 by 15), seal rear window (plate iv t), guide hose lh (plate vi aa), guide hose rh (plate vi aa), spacer (plate v i), bracket retainer lh (plate iv s), socket mobile charger, cover fuse box (plate iv ae), bush 44.8 idx51.2 odx114 long(os-630), washer spacing (plate v h), plate gauge (plate ix a), reverse horn flasher, shield heat lh(plate x a), shield heat rh (plate x a), plate retainer (jcb super plate xii a), adaptor, adaptor (el-9-13 circuit, auxiliary valve block), hose grease (plate xviii c), seal, nut m30 x 2 static (jcb super plate xviii j), differential nut, spacer main shaft ss750 (plate xxi c), ring seal, connector, benjo(jcb brake system plate g1-1-10), hose hyd oblique oti cooler (plate xxviii a), fuel tank cap (plate iii c), handle lh (ms sl-40), adopter m by m 1 inch bsp, cap side shift stabiliser, nut rivet (plate v b), stainer fuel filter (plate iii c), pin pivot, brake pedal (plate x p), adapter (plate xxi c), adaptor (jcb super plate xiii h), bush(plate-f1-6-1), guard hose lh (plate vi e), clamp, adopter 90 deg elbow (plate-xiii

Central Government/Public Sector

CTN :40529225

12 Jun, 2025 NA

Hubli - Karnataka

Tender For supply of ironer belt 1500gr/m2 needle felt of size: 5550x200mm for electrical flat work iro ner at mechanized laundry/ubl. specification: working temperature of max 200 c with heavy duty polyest er scrim of 450gr/m2 anti-static impregnated with s.s hooks heat seal resistant pin and aramid flap to co ver the hooks. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40531267

12 Jun, 2025 NA

Hubli - Karnataka

Tender For supply of ironer belt 1500gr/m2 needle felt of size 5700x200mm for electrical flat work iron er at mechanized laundry/ubl. specification: working temperature of max 200 c with heavy duty polyester scrim of 450gr/m2 anti-static impregnated with s.s hooks heat seal resistant pin and aramid flap to cover the hooks. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40194600

03 Jun, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : procurement of hydraulic packers erd packers and their accessories and shear out safety joint - 7 2-7_8 hydraulic packer, 5000 psi, 325 f , 7 2-7_8 hydraulic packer 26-29 ppf, 5000 psi, 325 deg f , redress kit for 7 hyd packer 26-29 ppf, 5000 psi, 325 deg f for item no 2 , 2 7_8 pump out plug with ball for item no 2 , redress kit for 2 7_8 pump out plug for item no 4 , 7 2-7_8 hydraulic packer 26-29 ppf, 10000 psi, 275 deg f , redress kit for 7 hyd packer 26-29 ppf, 10000 psi, 275 deg f for item no 6 , 2 7_8 pump out plug with ball for item no 6 , redress kit for 2 7_8 pump out plug for item no8 , 7 2-7_8 26-29ppf hydraulic packer, sour service, 5000 psi, 350 deg f , redress kit for 7 hyd packer 26-29ppf, sour service, 5000 psi, 350 deg f for item no 10 , pump out plug for 7 2-7_8 hyd packer, 5000 psi for item no 10 , redress kit for 7 hyd packer 26-29ppf, sour service, 5000 psi, 350 deg f for item no 13 , 7 2-7_8 26-29 ppf hydraulic packer, 10000 psi, 400 deg f , redress kit for 7 hyd packer 26-29 ppf, 10000 psi, 400 deg f for item no 15 , redress kit for 7 hyd packer 26- 29 ppf, 10000 psi, 400 deg f for item no 17 , 7 3-1_2 32-35 ppf hydraulic packer, 10000 psi, 400 deg f , redress kit for 7 hyd packer 32-35 ppf, 10000 psi, 400 deg f for item no 19 , pump out plug 3-1_2 1295ppf p110 eue bo up for item no 19 , redress kit for 7 2-7_8 26-29 ppf hydraulic packer, 10000 psi, 400 deg f for item no 22 , 7 3-1_2 26-29 ppf hydraulic packer, 10000 psi, 350 deg f , redress kit for 7 3- 1_2 26-29 ppf hydraulic packer, 10000 psi, 350 deg f for item no 24 , pump out plug 3-1_2 1295ppf p110 eue bo up for item no 24 , redress kit for 3-1_2 pump out plug for item no 26 , 9-5_8 2-7_8 435-47 ppf hydraulic packer, 5000 psi, 325 deg f , 9-5_8 2-7_8 47-535 ppf hydraulic packer, 5000 psi, 275 deg f , redress kit for 9-5_8 hyd packer 47-535 ppf, 5000 psi, 275 deg f for item no 29 , packer erd 2-7_8 eue 7 , seal bore etension for 7 2-7_8 65 ppf l-80 eue erd packer for item no 31 , ltsa for 7 2-7_8 65 ppf l-80 eue erd packer for item no 31 , redress kit for ltsa of 7 2-7_8 65 ppf l-80 eue erd packer for item no 33 , hydraulic setting tool for 7 2-7_8 65 ppf l-80 eue erd packer for item no 31 , ball seat for hydraulic setting tool for 7 2-7_8 65 ppf l-80 eue erd packer for item no 35 , redress kit for hydraulic setting tool for 7 2-7_8 65 ppf l-80 eue erd packer for item no 35 , retrieving tool for 7 2-7_8 65 ppf l-80 eue erd packer for item no 31 , redress kit for retrieving tool for 7 2-7_8 65 ppf l-80 eue erd packer for item no 38 , packer erd 7 2-7_8 premium 64 ppf , seal bore etension for 7 2-7_8 13 cr hunting sl-d erd packer for item no 40 , ltsa for 7 2-7_8 13 cr hunting sl-d erd packer for item no 40 , redress kit for ltsa of 7 2-7_8 13 cr hunting sl-d erd packer for item no 42 , hydraulic setting tool for 7 2- 7_8 13 cr hunting sl-d erd packer for item no 40 , ball seat for hydraulic setting tool for 7 2-7_8 13 cr hunting sl-d erd packer for item no 44 , redress kit for hydraulic setting tool for 7 2-7_8 13 cr hunting sl-d erd packer for item no 44 , retrieving tool for 7 2-7_8 13 cr hunting sl-d erd packer for item no 40 , redress kit for retrieving tool for 7 2-7_8 13 cr hunting sl-d erd packer for item no 47 , 31_27 premium 13 cr erd packer , seal bore etension for 7 3 1_2 13 cr hunting sl-d erd packer for item no 49 , ltsa for 7 3 1_2 13 cr hunting sl-d erd packer for item no 49 , redress kit for ltsa of 7 3 1_2 13 cr hunting sl-d erd packer for item no 51 , hydraulic setting tool for 7 3 1_2 13 cr hunting sl-d erd packer for item no 49 , ball seat for hydraulic setting tool for 7 3 1_2 13 cr hunting sl-d erd packer for item no 53 , redress kit for hydraulic setting tool for 7 3 1_2 13 cr hunting sl-d erd packer for item no 53 , retrieving tool for 7 3 1_2 13 cr hunting sl-d erd packer for item no 49 , redress kit for retrieving tool for 7 3 1_2 13 cr hunting sl-d erd packer for item no 56 , 31_2 95_8 premium 13 cr erd pack

CTN :40427717

10 Jun, 2025 NA

Ernakulam - Kerala

Tender For supply of compressor seal spares - face rotary 4 ib johncrane pdac32 , face static 8 ib johncrane pdac32 , o ring 2 ib johncrane pdac32 , o ring 3 ib johncrane pdac32 , o ring 1 ib johncrane pdac32 , face rotary 15 ob johncrane pdac32 , face static 21 ob johncrane pdac32

CTN :40402677

10 Jun, 2025 NA

Jaisalmer - Rajasthan

Tender For supply of barrack and road or electric and mechanic items - aium bow handle 200mm , aium haples and staples 150mm long , alum tower bolt 200mm make , aluminium handle 100 mm make , aluminium handle 150 mm make , butt hings 200mm , butt hings 50mm , butt hings 75mm , cement bag of 50 kg each , cp central hole mixture 15 mm for wash hand basin , cp concelled stop cock 15mm , cp health faucet 15mm x 8mm dia 1 point 2 mtr tube , cp jet spray 15mm with 1 point 5 mtr tube , cp sink coupling 50mm dia , cp sink mixture 15mm with regular spout w m , cpvc coupling 15mm , cpvc elbow 15mm , cpvc female adopeter brass 15mm , cpvc female adopeter plastice 15mm , cpvc male adopter brass thread size 15 x 25mm dia , cpvc pipe 15mm 10 ft length , cp curtain bracket fancy type 25mm , cp curtain bracket plain chromium plated 25mm dia fancy , cp curtain rod 20mm dia , cp curtain rod 25mm dia , drill bit size 6mm for drill machine , drill machine bit for concrete 12mm , drill machine bit for concrete 8mm , gi wire mesh 2 ft wide , gi wire mesh 4 ft wide , granding blade 4 inch , helical door spring 150 mm , hydraulic door closer classic 90 degree universal , internal kit for flush cistern with dual flush pvc , internal kit for flushing cistern single flush pvc , looking mirror 450 x 600 mm aluminum frame pvc , ms butt hinges 100 mm , ms handle for window , m seal 100 gm pkt , oil putty , piano type hinges ss 20 mm thick and 6ft long , plain glass sheet 3mm thick size of each sheet not exceed 0 point 5 sqm , plywood 3mm of size 8 ft x4 ft , plywood 4mm of size 8 ft x4 ft , plywood 6mm of size 8 ft x4 ft , pvc angle cock 15 mm , pvc angle cock 15 mm two way , pvc ball cock 15 mm with ball and rod , pvc ball cock 20 mm with ball and rod , pvc bib cock 15 mm , pvc bib cock 15 mm long body with flanged , pvc connection 15 x 450 mm , pvc connection 15 x 600 mm , pvc flushing cistern 10 ltr cap , pvc health faucet 15mm with tube 1 point 5 mtr and hook , pvc jet spray 15mm with 1 point 5mtrs connecting tube , pvc overhead shower round 3 inch , pvc pillar cock 15 mm , pvc pillar cock 15 mm swan neck , pvc stop cock 15 mm , pvc tank cover lid , pvc toilet seat cover for ewc , pvc waste coupling 32mm dia full threaded , pvc waste pipe 32 mm , rubber beading 75mm wide 15mm , ss concealed curtain socket 25mm , ss curtain support set 25mm , stainless steel kitchen sink coupling 114mm , steel but hings 150mm , tank connection nipple 25mm , tank nippe 20mm , teflon tape 20 to 40mm width 21 to 30m long , tower bolt aluminium 100 mm , tower bolt aluminium 150 mm , urinal white pipe 45mm , viterous china wash hand basin size 530 x 425mm , vitreous china squatling pan orisa pattern of size 580 x 440mm , water storage tank 1000 ltr cap d l , water storage tank 500 ltr cap d l , aluminium door stopper single , aluminium door stopper double , wooden cutter blade , drill bit size 14mm , iron pipe clip 20mm , iron pipe clip 15mm , iron hook for gi pipe 15mm , iron hook for gi pipe 20mm , leakage repair water proof tape 5cm x 5m alu foil tape water proof adhesive for water tank and pipe , 2 ft x 2 ft recess ceiling light 36 watt , 2 ft x 2 ft surface ceiling light 36 watt , ac single phase static energy meter capacity 5 to 30 amps lcd type , ac three phase static energy meter capacity 5 to 20 amps lcd type , aluminium lugs 150 sqmm , aluminium lugs 185 sqmm , aluminium lugs 300 sqmm , aluminium lugs 400 sqmm , aluminium lugs 50 sqmm , aluminium lugs 70 sqmm , building security light 25 w , capacitor 2 point 5 mfd , capacitor 4 mfd with copper therminal , capacitor 6 mfd , pvc casing capping 20mm , pvc casing capping 25mm , ceiling fan 1200mm w o regulator , copper cable three core 1 point 5 sqmm for ac , copper cable three core 2 point 5 sqmm for ac , electric cable 1 point 5 sqmm roll of 180 mtr , electric cable 2 point 5 sqmm rol of 180 mtr , electric cable 4 sqmm rol of 180 mtr , electric plug top 16 a , electric plug top 6 amp , extension board heavy duty , fan regulato

Central Government/Public Sector

CTN :40351999

05 Jun, 2025 NA

Numaligarh - Assam

Tender For supply of plug valves for ag and ug piping for msb, pfcc, gds and ff for nrep as per technical specifications for numaligarh refinery limited, assam, india - group-1 (group wise evaluation)supply of plug valve for ag+ug piping for nrep project including tpi charges as specified in material requisition., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non

Pp Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector