Tender For rate contract for supply of electric items for fy 2025-26. - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 3700 lm, led street light fixture with minimum lumen output 5600lm, led street light fixture with minimum lumen output 8700 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr 6sqmm 2core, 10sqmm 2core, 6sqmm 3core, 10sqmm 3core, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 3 pole power contactors with following ac 3 rating 40amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . one day reserve (analog type ), p & f of 240 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., p & f of 415 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., providing & fixing of 240/415 v ac mcb with positive isolation of 10 k
Tender For supply of sitc of 200 kva new diesel engine alternator set with accessories as per nit , supply and laying 1 no. 3.5 core 240 sqmm aluminium conductor armoured ug cable in open duct , supply and laying 1 no. 3.5 core 240 sqmm aluminium conductor armoured ug cable in existing rcc or hume or metal pipe , supply and laying 1 no. 3.5 core 240 sqmm aluminium conductor armoured ug cable on existing cable tray , supply and laying 1 no 3.5 core 240 sqmm aluminium conductor armoured ug cable on surface , supplying and making end termination with brass compression gland and aluminium lugs for 3.5 x 240 sq mm al cable
Tender For corrigendum : supply of sitc of 24 core single mode armoured optical fiber cable , sitc of 12 core single mode armoured optical fiber cable , sitcof 50 pair jelly filled outdoor telephone cable , sitc of 20 pair jelly filled outdoor telephone cable , sitc of 15u wall mount networking rack with all accessories , sitc of 24 port rack mount liu fully loaded with sc to sc couplers , sitc of 12 port rack mount liu fully loaded with sc to sc couplers , sitc of 100 pair plus 100 pair main distribution box , sitc of 50 pair plus 50 pair main distribution box , sitc of hdpe pipe size 40mm , sitc of gi pipe size 65mm , sitc of sc to lc single mode 3mtr fiber patch cord , sitc of sc to lc single mode 1mtr fiber patch cord , sitc of cat6 utp cable 305mtr roll , sitc of cat6 patch cord 3mtr , sitc of cat6 patch cord 1mtr , sitc of mdf with internal pipe for entry of cables cable glands , sitc rcc chambers with precast rcc cover with lifting hooks , sitc of joint enclosure for 24 core ofc jointing work , sitc of joint enclosure for 12 core ofc jointing work , laying clamping of 24 core and 12 core ofc in duct , laying clamping of 50 pair and 20 pair telephone cable , sitc of cable route markers as per specifications , digging of soft soil and backfilling as per original site condition , digging of hard concrete surface road crossing and refilling , machine horizontal directional drilling hdd for crossing hard surface , otdr report and power meter testing , supply design and provide auto cad as built drawing
Tender For provi. transformer plinth, structure plinth for equipment, rcc road, rcc cable duct, oil sump, supply, transporting and erection of t3s, c3s, c4 type towers,booms, hbg metal filling,stone dust filling,allied civil work for proposed uddanapally
Tender For supply of extending ncn connectivity to new admin building andat mi room and ims at ins baaz - supply of single mode optical 12 f armoured , hdpe duct pipe , joint closure , supply of rcc chamber , otb installation and supply , electrical conduit 32 mm , 32 mm capping and casing of ibd work , ground cable 1cx4 sqmm , supply installation and commissiong of 3cx2.5 sqmm power cable , apc e 2000 patch cable , lucent connector , supply installation and commissiong of back box and face plate , category 6 utp and abd , two port i o , corrugated tube , dwc pipe 70 mm , single mode fusion in 02 nos otbs , single mode optical laying in pipe , structure of category 6 utp laying , integration and commissioning of access switches with existing cucm , pipe laying via open trenching , concrete working