Tender For repairing renovation, addition alteration including dismantling existing dilapidated slab and replacement of damaged a c sheet by providing new rcc slab with column and beam and increase of plinth height for old harni colony post office structure at
Tender For corrigendum : provision of pol stores for microlight base elect section tool crib addn altn of roof sheet provn of view cutters and other allied work at certain location of af station under ge af bamrauli - surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed., excavation in trenches for n.exc 1.50m wide not exceeding 10 sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out, complete all as specified and directed., excavating over areas hard & dense soil, n. exc 1.5 m deep and getting out, complete all as specified and directed., m&l for pcc 1:4:8 type d2 graded stone aggregate cement concrete in flooring, foundation, filling and mass, complete all as specified and directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed., removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. complete all as specified and directed., m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed., m& l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, complete all as specified and directed., m&l for rcc (20mm grade aggregate type b1 (1:2:4) nominal mix columns, pillars, piers, posts and struts, complete all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate to chajjas, complete all as specified and directed., m&l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed., m&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed., m&l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed., m&l for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed., m&l for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of rcc/pcc bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed., s&f for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed., s&f for mild steel tmt or twisted bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups etc. complete all as specified and directed., m& l for pcc 75mm thick type c-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection, complete all as specified and directed., m&l for brick work with sub class b bricks, straight
Tender For tender for mist chamber construction and instalation - ( ) , mist chamber constructed on leveled area with earth work & surrounded by brick walls of height 600 mm, width 200 mm plinth wall rested on rcc bed of width 200 mm x 50 mm, supported with rcc pillars & beam. overall width of chamber = 4 meter; overall length of chamber = 7 meter, attached with operating room (2 metre x 2 metre) at entrance. completed with poly carbonate sheet house with cooling pads and exhaust fan with motor & foggers. constructed inside 2 platforms of dimension 6-meter (length)x 1 meter (width)x 0.10-meter (thickness) made of rcc, supported/rested on total 15 nos. brick pillars of size= 1 m (width)x 0.20 m (thickness)x 0.900 meter (height) including plinth as per drawing attached. nali for cooling system & pipe for fogger line /sprinkling system with hydraulic pump and appropriate filter system and sintex tank (500 litre) completed with necessary electric fitting with switch board (with warranty of min. 3 years) the surrounding wall will be plastered, duly painted with emulsion paint. complete set with onsite fitting including all kind of labour work.
Tender For renovation of pond (43m x 27m) with rcc concreting of slide slope, base making with rcc beam at kalyani field station of rrc, icar- cifa, rahara, kolkata
Tender For tpj-dg (up and dn line) section - proposed construction of boundary wall with pre-stressed precast panel, precast column,precast rcc foundation (safety fencing) for a length of 46.40 km and w beam type metal fencing for a length of 73.60 km in between tiruchchirappallai(excluding) - manaparai - ayyalur station in sse/p.way/manaparai jurisdiction section.
Tender For construction of rob with (1x42 mtr composite girder + 2x18 mtr composite girder + 8x24.0 mtr rcc t- beam girder, including bridge approaches with re walls in lieu of existing manned lc- 396 at km: 708/3-5 between dandugopalapuram - kotabommali stations of waltair division in east coast railway"
Tender For tender for gram panchaayat saimaree mein muktidhaam ka nirmaan kaary. - boring of 300mm3.5 met depth doubble under reamed pile in black cotton soil i/c all etc., rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in pile (dsr no. 5.1.3), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in beam (dsr no. 5.1.3), rc.c. in 1:1.5:3 cement sand & 20mm. gauge stone grit.in columns (dsr no. 5.2.2), m150 class brick work with 1/4 c/sand morter in foundation (dsr no. 6.3.2), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.inbeam (dsr no. 5.3 (a)), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in slab beem (dsr no. 5.3 (a)), rc.c. in 1:2:4 cement sand & 20mm. gauge stone grit.in slab (dsr no. 5.3 (a)), ms iron work in plain work such as rainforcementin rcc (dsr no. 5.22.1), 12mmthick plaster work with 1:4 c/sand morter i/c all etc (dsr no. 13.1.1), e/w work filling in room by 1km tt out of side to work site, laying 4cm thick dpc with p/s 13 mm stone grit (dsr no. 11.3), finishing wall with acrylic smooth exiterior water proof paint (dsr no. 13.46), providing , laying spreading and compacting stone dust in blanket coat compacted thickness on a prepared base and compacting with power roller including all materials,machinery,labour& t& p etc.complete, construction of granular sub-base by providing wellgraded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at omc and compacting with smooth wheel roller to achieve the desired density complete as per technical specification clause 401, supply and laying of 80mm th paver block rubber mould interlocking, supply & fixing sign board/photograph
Tender For auction sale of lt wiring kit,p.v.c. alu. cable-5112.5kg, xlpe. u.g aluminium cable etc.,,single phase high precission meters (e/mtype,fibre/plastic body) etc.,,single phase energy meters (static meter)single phase energy meters etc.,,failed 200 kva transformer with copper winding & without oil,acsr conductor scrap,angle iron, cross arms, tc sets & clamps,gos scrap & etc..,rcc pole skelton rods etc.,i beam.m.s rail pole,ht metering cubicle,11kv pt/ct of different capacityct-139no,pt-141no,failed 25 kva conventional transformer with aluminium winding & without oil,failed 63 kva conventional transformer with aluminium winding & without oil,failed 63 kva 3 strar transformer with aluminium winding & without oil,failed 100kva conventional transformer with aluminium winding & without oil,failed 25 kva 3 startransformer with aluminium winding & without oil,single phase high precissionmeters(e/mtype,fibre/plastic body) etc.,,single phase energy meters etc.,,angle iron, cross arms, tc sets & clamps, gi angular etc.,,rcc pole skeleton rods,i beam.m.s rail pole,ladder ploe,lt wiring kit,p.v.c. alu. cable,failed 100kva 4 star transformer with aluminium winding & without oil,failed 33/11 kv 5 mva power tranformer aluminum windingwith oltc,single phase high precission meters(e/mtype,fibre/plastic body) etc.,,failed 25 kva transformer with aluminium winding & without oil conventional,failed 63 kva transformer with aluminium winding & without oil 3 star,failed 100 kva transformer with aluminium winding & without oil conventional,failed50 kva transformer with copperwinding & without oil conventional