Latest precision lcr meter Tenders | Government precision lcr meter Tenders

corporations/Associations/Others

CTN :39521610

24 Mar, 2025 NA

Pimpri - Maharashtra

Tender For corrigendum : 21/2024-25 purchase of laqshya instrument - purchase of instrument ( laqshya), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, fetoscope - technical specification of infant fetoscope should be 135 75mm weight should be up to 350gm should be 40cm h20 presser limiting valve inspiratory resistance should be 5cmh2o (at 50l/min), delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on

CTN :39342632

15 Apr, 2025 4.67 Crore

Amravati - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,amravati - hardware part, battery charge and discharge test system, data acquisition and logging system, thermocouple/ rtd for temperature measurement, battery tester for internal resistance testing, electric vehicle bldc motor training system, bldc (brushless) inner rotor brushless dc motor coupled with dc shunt motor to study the load characteristics and study of drive parameters, battery characteristics training system, pmdc motor training system, power and transmission system study models for ev application, pmsm motor coupled with dc generator test bench setup, switched reluctance motor coupled with eddy current dynamometer test bench setup, pwm charge controller training system:, sectioned electric vehicle two-wheeler chassis, sectioned electric vehicle four-wheeler chassis, battery resistance spot welding machine, dc /ac clamp meter, non-contact type tacho meter, computing workstations for ev design and simulation, multi-body dynamics analysis research software bundle for ev (10 user), power train/ gearbox design research software package, 1d+3d thermal modelling, bms modelling, electric motor, ic engine modelling research software package, multi-physics cae research software package with battery modelling and analysis capabilities, nmc cell ( size 18650), nmc cell ( size 26650), lfp cell, smart bms training system, electric vehicle scanner, diy kits for 20 students, advanced driver assisting system (adas) training system for e-mobility, ac ev charger 10kw, dc fast charger: 20kw, multifunction installation tester, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, digital infrared thermometer, digital multifunction meter with vfd, ef-detection & 3-phase rotation, vde approved insulated tool set for ev, electric vehicle safety equipment, ev battery assembly & testing centre setup, ev battery pack cell equalizer, regenerative charging and braking training system, ev assembly disassembly kit, three phase power clamp-on meter with harmonics measurement, digital insulation multi function meter, phase sequence indicator, battery quality anaylyzer with data logger, laptop, hybrid display module, hybrid trainer module motorized, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, computing workstations / pc, engineering simulation software multi-physics cae research software (includes pre-processor and post processor) 10 users, 3d cad package ( 60 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, electromagnetic (em) simulation with circuit design, rf circuits and system design (5g) academic research software :, integrated circuit (ic) design & verification academic research software :, soc development board with software, emc/emi test equipment, spectro radiometer for measurement of the luminous flux, spectrum, color, and color rendering indices of single leds (hand held device), high end computers, 3d printer for prototyping, laptop, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glass type doors, seminar chairs with desklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall colori

CTN :39737707

27 Mar, 2025 12.38 Lacs

Pune - Maharashtra

Tender For tender for process control lab equipments - process control equipments, cascade control trainer, iot interface system, multi function callibrator for pressure and temperature, interacting and noninteracting system, digital turbidity meter, air quality monitoring system (pm2.5), hand held rtd calibrator, digital clamp meter, plc trainer kit, plc software, flow measurement trainer, temperature measurement trainer, air compressor, ni daq card (details specificqations for all above items as per )

Central Government/Public Sector

CTN :39761942

02 Apr, 2025 15.42 Lacs

Bhagalpur - Bihar

Tender For providing of custom bid for services - 200139514 installation and operation of temperature and humidity control system during condenser tube on load off load hp jet cleaning and alumina blasting of turbine components during overhauling at ntpc kahalgaon 4 x 210 m..

Central Government/Public Sector

CTN :39758528

30 Jun, 2025 NA

Duliajan - Assam

Tender For expression of interest for item- crome casing pipes , chrome tubing pipes , drill pipes , heavy weight drill pipe , drill collars and lifting plug , drilling stabilizers , drilling/ workover handling tools --- elevators, tongs, , slips etc. , potassium formate , solid control equipment --- mud cleaner/ degasser/ , centrifuge/ linear motion shale shaker , sucker rod pump (srp) and its accessories , srp insert pump , ethyl mercaptan , low shear velocity fluids/polymers , emd chemical dosing pump, reciprocating pump , hsp 20/40, isp 20/40, isp 30/50 mesh , pig tracker/transmitter , pipeline locator , logging cables , tri cone roller drilling bits of various sizes , 11"od standard reverse circulating junk basket & 7.7/8" od reverse circulating junk basket , pdc drill bits of various sizes , fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole , impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing , pneumatic spinner , 5.1/ 2" premium threaded casing (grade: n80 & grade p110) , cased hole logging units with tools and accessories along with installation, commissioning and training , wireline mast unit, including training and installation& commissioning , oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and hardware accessories , ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories , oil well explosives: explosives for baker pressure setting tools: power charge, primary ignitor & secondary ignitor , procurement of oil well explosives used in exploration and production of hydrocarbon , 27.1/2" (698.50 mm) rotary table , 7.1/16" x 10 m double ram bop with accessories , 13.5/8" x 10 m single ram bop with accessories , 3.1/16" x 10 m flexible steel hoses for choke manifold , 3.1/8" x 5 m flexible steel hoses for choke manifold , 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose , 3.1/8" x 5m flexible steel hoses , thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning , hose vibrator , rotary hose, drilling in assorted length , 2.34 mm (0.092") piano wireline (well measuring line) , static gel strength analyzer , electronic reservoir pressure and temperature measuring gauge. , automatic distillation apparatus , ft ir spectrophotometer , rheometer , 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton) , digital acoustic liquid level measuring cum dynamometer equipment (echometer) , cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length , geological thin section preparation unit comprising of cutting, vacuum impregnation, grinding and polishing equipment and consumables. , polarised microscope , pony drill collar , premium tubing , 37.1/2 rotary table , air gas permeameter , double block and bleed isolation plug , gas chromatograph , low to moderate temperature cement retarder , high temperature fluid loss control cement additive , xcd-polymer , xc-polymer (premium) , poly anionic cellulose-regular , poly anionic cellulose-super lo , junk sub 5.1/2 inch & 7 inch , 13.5/8-inch x 10000 psi annular bop , 13.5/8-inch x 10000 psi double ram bop. , ct reels , super fishing jar , drilling jar , overshots , slammer logging cables , 3 left hand kelly , multi element analyzer , high performance ep lube , mercury free pvt system , surface memory gauge , accessories of logging cable , downhole pressure temperature gauge , real time kinematic differential global positioning system , flow assurance software , seismic survey designing and modelling software , low to moderate temperature fluid loss control cement additive , high temperature cement retarder , cement friction reducer , isotope ratio mass spectrometer , fishing tool 6.75 od, axial vibrational, shock absorbing tool , 8 od, axial vibrational, shock absorbing tool , tubing stripper , nano-graphene based lubricant , tubing retrievab

CTN :39668005

02 Apr, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply and installation of miscellaneous items - led notice display board height (min)(mm)-609.6, length(min)(mm)-1920, led pitch (max) (mm)-10, led display board type-single,led colour-red,led type-smd,language-english; regional,unicode support-utf-8,number of display lines]-2,type of displayed infornation-static + scrolling both,viewing angle-horizontal 160 deg or higher & vertical 130 deg or higher,viewing distance (meter)-15,automatic brightness control-yes,led brightness(cd/m2)--4001-5000,pixel pitch (mm)-10,minimum pixel density (dots/meter2)-5000,maintenance-rear,duty cycle-16x 7,life span (hours)-50000,construction-display system,it is consisting of led display board + embedded controller,cabinet-steel/alluminium box duly powder coated,type of installation-outdoor,wi fi connectivity-yes, if yes, type of wi fi connectivity,802.11 b/g/n,usb port-1,gsm connectivity-yes, if yes, cellular data support-4g/lte,input voltage (vac)-110-240,maximum power consumption (watt)-300,weight (kg)-50,on site oem warranty (year)-1, pa- audio sound system with trolly :- system type-1 way,built in uhf receiver-no,number of wireless microphones-2,bluetooth connectivity-avalilable,built in memory (gb)-0,number of channels-1,warranty (years)-1, sanitary napkins vending machine :- type of machine-automatic,operating features-coin operated/free,multiple coins accepted-yes,number of selection options-2,accessibility for free vending utility service-na,type of loading-spiral,maximum storage capacity (nos)(nos)-25-50,material of the outer body-mild steel(ms),built-in charger-no,mode of function-stand alone,operating power source-electronic,battery backup time (hrs)-na,thickness of ss/ms sheet (mm)-1.2,thickness of frp/plastic sheet (mm)-1.2, sanitary napkins incinetator machine with smoke control unit :- stand provided-yes, thickness of thermal insulation material (mm)-40 millimeter, thickness of ms/ss sheet of burning chamber (internal) (mm) (min)-3 millimeter, machine weight(kg)-51-250, thickness of door including insulation (mm)-40 millimeter, flexible emission outlet pipe dia (mm)-76 millimeter, material of housing cabinet (external)-mild steel(crca) sheet, material of burning chamber (internal)-stainless steel sheet of ss-304 grade, material of thermal insulation-high density ceramic board, temperature indicator provided-yes, minimum burning temperature (degree c)-800, burning capacity per day (number of napkins)-1000-1250, burning capacity at a time (number of napkins)-26-50, burning time of full capacity napkins/pads (minutes) (max)-35 minutes, automatic digital controller for time-yes, automatic digital controller for temperature-yes, type of scu (smoke control unit)-top mounted, material of housing of smoke control unit (scu)-mild steel(crca) cabinet, both carbon control and foul odour control chambers for filteration of smoke emission-yes, number of filters in carbon control chamber-one, type of filters in carbon control chamber-ceramic blanket as a filter, number of filters in odour control chamber-one, blower rpm-1800, warranty in years (option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue)-1, wall mounted automatic fire extinguisher:- extinguishing media-powder based (as per is 4308), expellant medium-n2 based, extinguishing agent of powder based fire extinguisher-abc map90, discharge mechanism-automatic, additional requirement (hint: select na if not applicable)-na, cylinder/vessel material-mild steel, valve material-stainless steel, internal coating-epoxy powder coating, external coating-epoxy polyester powder, powder based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not powder based)-6,7,8&9, clean agent based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not clean agent)-na, fitted with heat sensor quartzoid bulbs with sprinkler heads-2, class of fire for which fire extinguisher is

Central Government/Public Sector

CTN :39688580

26 Mar, 2025 NA

Dibrugarh - Assam

Tender For supply of explosives and hardware for 2 inch scallop hollow carrier spiral perforation gun system, firing panel for rf-safe electronic detonators (red), for baker plug setting tool for size - 20, accessories for bst type: e-4, size 20, deep penetration (dp) 53.975 mm (2.1/8 ) through tubing perforation system (zero degree phase) & accessories, rf-safe electronic detonators-temperature- and pressure resistant- exposed to fluid & suitable to use with ttp, detonating cord hmx 80 gr/ ft. rilsan /teflon or equivalent jacketed low shrink (1% max.) 100% inspected,54 mm (2.1/8") strip carrier 0 deg. phased, detonating cord/ charge 'clips' for fixing detonating cord, deep penetration (dp) 53.975 mm (2.1/8") through tubing perforation system (zero degree phase) & accessories., splice boot for lead wire, detonator cord retainer, deto cord end seal, 2.1/8" charge tightening wrench for 0 phase ttp gun system, firing panel for rf-safe electronic detonators (red) with all essential accessories/kit.

CTN :39730438

08 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of benchtop laboratory controlled heating system with protective gas connection and over temperature li

State Government

CTN :39730696

08 Apr, 2025 34.00 Lacs

Agra - Uttar Pradesh

Tender For supply of solar parabolic concentrator with central tracking system , receiver , expansion tank , fluid distribution pipe , thermic fluid pump , vfd , digital flow meter , temperature gauge , pressure gauge , thermic fluid cooking vessel , stand and structures for all scheffler dishes , thermic fluid

Central Government/Public Sector

CTN :39731298

28 Mar, 2025 6.44 Lacs

Muzaffarpur - Bihar

Tender For providing of custom bid for services - 200141529 contract for installation and operation of temperature and humidity control system during hp jet cleaning of condenser tubes and alumina blasting of turbine components at ntpc kanti

Precision Lcr Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector