Latest prefab structure Tenders | Government prefab structure Tenders

Central Government/Public Sector

CTN :36275321

10 Jun, 2024 NA

Jaipur - Rajasthan

Tender For grading and repairing of entrance hood, providing stainless steel railing along ramp at entrance, providing cpvc line for connection from phed line and other miscellaneous civil works at air transmitter building jalipa, barmer

corporations/Associations/Others

CTN :36277376

01 Jul, 2024 25.70 Lacs

Noida - Uttar Pradesh

Tender For supply and installation of prefabricated structure over terrace of data centre building, noida

CTN :36242610

03 Jun, 2024 4.47 Lacs

Mumbai - Maharashtra

Tender For corrigendum : removing and refixing of precoated gi steel sheet with steel structure from building no. 25 to over roof of mess at nsti campus,mumbai.

CTN :36151772

03 Jun, 2024 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of electric building and generator spares - led tube light fitting 1 20 watt complete with all accessories , angle holder with isi mark , led bulb 15 watt with isi mark , switch socket combination 5 pin 5 amps cum 15 amp with gang box with isi mark , switch socket combination 5 pin 5 amps with gang box with isi mark , ceiling rose three terminals pvc polycabonate isolated body with isi mark , pvc round square 4 4 block with isi mark , switch 5 6 amp , gang box 6 switches 5 amps , gang box 4 switches 5 amps , gang box 3 switches 5 amps with isi mark , gang box 2 switches 5 amps with isi mark , gang box 1 switches 5 amps with isi mark , screw full threaded 25 mm , screw full threaded 50 mm , screw full threaded 75 mm , wire flexible 40 76 with isi mark , pvc insulated wire multi stranded copper conductor one and half sqmm , mcb 6 amp sp 240 volts c series with isi mark , mcb 16 amp sp 240 volts c series with isi mark , isolator 63 dp amp , gi earth wire 1 by 18 insulated 1100 volts copper conductor with isi mark , insulation tape 25mm width of 20 mtr long with isi mark , mcb sp 10 amp 240v 50hz b series , button holder , bulb red and green 0 watt , wire 4 sq mm 1 core 90 mtr roll , change over switch 100 amp , change over switch 63 amp tpn , piano type switch 5 amp , tape roll , celling rose , pvc gang box 5 way , celling light 22 , mcb 63 amp tpn , pendent holder , led round light , bed switch , square box , screw for casing caping 25 mm long 100 nos in pkt , mcb 20 amp , switch socket 3 pin 5 amp , casing caping 1 inch , casing caping 2 inch , 1 5 amp s s comb with board , 2 5 amp s s comb with board , 5 amp s s comb with board , 16 amp socket , mcb 63 amp 4 pole , mcb 32 amp 4 pole , socket g half inch , mcb dp , 4 core wire 10 sqmm aluminum , 2 core wire 6 sqmm , 2core wire 10 sqmm , 4 core wire 25 sqmm aluminum , cement opc 43 gde , sand , pp r pipe pn 20 sdr 6 3 layer with outer dia 40mm , pp r pipe pn 20 sdr 6 3 layer with outer dia 32mm , pp r pipe pn 20 sdr 6 3 layer with outer dia 25mm , pp r pipe pn 20 sdr 6 3 layer with outer dia 20mm , pp r tank connector outer dia 32mm , pp r gate valve connector outer dia 40mm , pp r elbow 90 degree plane outer dia 40mm , pp r elbow 45 degree plane outer dia 40mm , pp r elbow 90 degree plane outer dia 32mm , pp r elbow 45 degree plane outer dia 32mm , pp r tee reducer 40 32mm , pp r union outer dia 32mm , pp r wall clamp dia 40mm , pp r wall clamp dia 32mm , pp r socket outer dia 32mm , pp r socket outer dia 40mm , pp r plug dia 25mm , pp r plug dia 15mm , insulation for 25 mm outer dia pp r pipe pn 20 sdr 6 3 layers of size 28mm 19mm , silicon tape , insulation for 32mm outer dia pp r pipe pn 20 sdr 6 3 layers of size , adhesive solution sr 998 for jointing of insulation make k flex , pp r tee outer dia 32mm , pp r female threaded elbow dia outer dia 32mm 15mm , pp r male threaded elbow outer dia 32mm 15 mm , pp r female threaded socket outer dia 32mm 15mm , pp r female threaded socket dia 25mm , aggregate 20mm , aggregate 40mm , pp r wall clamp dia 75mm , 10 ltrs capacity pvc flushing cistern , chromium plated cp brass pillar cock , chromium plated cp brass stop cock , pvc insulated connection 16mm dia 450mm long , pvc pipe 75mm dia , pvc socket 75mm , pvc tee 75mm , pvcelbow 75mm , pvc pipe 110mm dia , pvc socket 110mm , pvc tee 110mm , pvcelbow 110mm , stainless steel jali with hole for waste pipe , stainless steel jali without hole , pvc nahani trap 75mm dia , pvc cowl 4 inch dia , plywood commercial 10 mm thick of size 1830 910mm , welding rod , pvc swr pipes single socketed in any length rubber ring joints 110 mm bore , cgi sheet 10 feet normal , syathetic enamel red paint in 1 ltrs packing , brush 2 inch , door handle aluminium as per sample , brush 4 inch , plywood commercial 12 mm thick of size 1830 910mm , self tapping screw 35mm , acrylic window glass 4 mm thick 1170 950mm , syathetic enamel sand paint in 1 ltrs packing , acrylic windows glass 1 fe

CTN :36252234

17 Jun, 2024 4.12 Lacs

Nalanda - Bihar

Tender For repair of steel stair internal wall in nox building and acid mixing area mixed spent acid storage tank area steam line structure and acid line rack column in plant area at ofn, rajgir

Central Government/Public Sector

CTN :36254180

24 Jun, 2024 NA

Moradabad - Uttar Pradesh

Tender For (zone no. 3 mb ) all residential / service building in north side and south side of main road including wood, steel & road work in the section of sse/w/hrh under aden/hq/mb

Central Government/Public Sector

CTN :36254181

24 Jun, 2024 NA

Moradabad - Uttar Pradesh

Tender For (zone no. 4 mb ) all works in residential officer's banglow in railway officers colony, residential building in railway north colony and service building in railway north colony & railway officers colony under sse/drm/office/ mb including wood, steel & road work under aden/hq/mb

Central Government/Public Sector

CTN :36254182

24 Jun, 2024 NA

Moradabad - Uttar Pradesh

Tender For (zone no. 2 mb ) all service/residential building between sambhal road and loco shed, rob and south side up dep. line in the section of sse/w/south colony / mb including wood, steel & road work and all work in residential building & service building including loco colony & line section of sse/w/loco/mb under sse/w/hq/mb, including wood , steel & road work under aden/hq/mb

Central Government/Public Sector

CTN :36011847

05 Jun, 2024 NA

Angul - Odisha

Tender For corrigendum : supply of lime dosing system for 2x660 mw ntpc talcher tpp stage iii - surge hopper , vibrating feeder , continuous discharge twin feed type bucket elevator with standard components as per item description. , lime silos - ms with ss 304 lining on conical portion- complete as per item description. , selfcleaning bag filter system of suitable capacity along with blowers, automatic- on-load cleaning system. , manual knife gates along with interconnecting flanges, hardwares and gaskets. , motorized knife gates along with accessories, interconnecting flanges, hardwares and gaskets. , rotary vane feeders- rotary air lock feeders - moc -stainless steelalong with motor- ie3 , interconnecting flanges, hardwares and gaskets. , screw conveyors complete as per item description , neutralisation tanks as per item description , agitators of ss construction with motor- reduction gear and its mounting , lime slurry dosing pumps alongwith motor - ie3- , process water piping from tp outside building to neutralisation tanks along with overflow and drain piping of tanks, back-flushing pipeline along with valves, fittings , lime slurry piping from neutralization tanks to dosing pumps inlet and from feeding or dosing pumps outlet to waste water tank inlet along with re-circulation line with all required valves, fittings , all interconnecting pipe or ducts, valves and all chutes instrument air, water line, slurry lines , instrument air piping from tp outside building upto equipment related to the system , supporting steel structure, platforms, ladders, railings, and holdback as applicable along with all accessories and necessary hardwares for complete lime feeding or dosing system. , complete instruments associated with equipment and integral piping as defined at 13-16 above for lime feeding or dosing system. , special tools and tackles or erection and start-up or commissioning spares , total lump sum prices for visits as per item description. , total lump sum prices for supervision of assembly, erection and commissioning, trial run at site and training to o and m staffs as per item description. , total lump sump price for successful conductance of performance guarantee test and handover as per the item description. , total lump sump price for training of employees of customer at manufacturers works - 3 persons for 2 days including lodging and boarding , low pressure piping-valves all sizes as per item description , agitators for neutralisation tank impeller assembly-1 lot is equal to 1 no of each type , agitators for neutralisation tank-bearing assembly- 1 lot is equal to 2 nos of each type , agitators for neutralisation tank-motor - 1 lot is equal to 1 no of each type and rating , agitators for neutralisation tank-belt and pulley if applicable- 1 lot is equal to 2 nos of each type , agitators for neutralisation tank- gear box assembly if applicable 1 lot is equal to 1 no of each type , slurry pumps- impeller assembly- 1 lot is equal to 1 no of each type , slurry pumps casing liners -1 lot is equal to 2 nos of each type , slurry pumps-seals-1 lot is equal to 3 sets of each type , slurry pumps-bearings-1 lot is equal to 2 nos of each type , slurry pumps-motor- 1 lot is equal to 1 no of each type and rating , slurry pumps-motor-pump coupling 1 lot is equal to 1 no of each type , measuring instruments-transmitters of all types, range and model no - 1 lot is equal to 10 percent of each type and model, which ever is more , process connection piping as per item description - valves of all types and models - 1 lot is equal to 20 nos. of each type and model. , process connection piping as per item description - 2 way, 3way, 5way valve manifolds - 1 lot is equal to 10 nos. of each type, class, size and model. , process connection piping as per item description - fittings - 1 lot is equal to 100 nos. of each type. , process connection piping as per item description - purge meters - 1 lot means 20 nos. of each type and model. , process connection

corporations/Associations/Others

CTN :36259211

17 Jun, 2024 18.60 Lacs

Anpara - Uttar Pradesh

Tender For supply of miscellaneous fire items for atp, anpara - hose pipe 63mm x 22.5mtr, delivery hoses pipe of male &female coupling 22.5 mtrshould be made of ss 304 and conforming to is 636,, fire bucket, 100 mm 4" steel bench vice, specification : specification for 100 mm (4") steel bench vice - 1. material : steel fabricated vice swivel with fixed base for heavy duty . 2. colour : red. 3. dimension (lxwxh) : 286mm x 128mm x 117 mm +_ 10% ., karabiner, specification : specification for karabiner : 1. shape- d type . 2. srew on biner design. 3.anti skidding . 4. material : aluminum- magnesium alloy. 5. dimension lxb (4.4 x 2.95 inch ) plus .minus 10%. 6. weight: 85 gms plus minus 10%. 7. tension 30 kn having 03 s ew lock. 8. pear shaped facilitate belaying single ropes with a munter hitch. for connecting belay/rappel devices or use at the end of a lanyard., electrical siren, specification: specification of electrical siren 03 km rang ; 1. horizontal, double mounting type. 2. arrangement for mount at high elevation of building. 3. single phase - 220/250 volts. 4. 6000 rpm , 50hz ac. 5. supporting spares for installation and switching device. 6. required wires should be supply along with above electrical siren. 7. audible rang- 3 km., fire gum boot, specification: specification of industrial and protective rubber knee boot is: 5557-2004 . rubber knee boot type -ii , consist of reinforcing fabric made of cotton or manmade fabric having minimum breaking load of 1000 n at warp and 550n at weft, when tested in accordance e with is: 1969 and will be lined with sea table rubber compound. material required for industrial protective rubber boot should confirm table -iii of is- 5557-2004. thickness - the minimum thickness ( rubber and fabric ) of the boot for type ii for various parts and component. all tests confirm to is: 5557-2004. size - 9 and 10, fire helmet ,specification : specification of fire helmet as per bis 2745-1983. 1. shall: the shell of the helmet shall be made of non metallic materials so as meet the test requirement mentioned in bis 2745-1983. 2. protective pad: it shall be of expanded polystyrene or materials of similar properties. 2. retention system : the material for the headband, chin strap and cradle shall be sweat - resistant.,non irritant and shall not cause skin disease. 4. size: helmet shall be of the size having circumstances of inside heaband of 560 m -600mm. 5. construction requirement: the construction of the helmet shall be comply is- 2745-1983. 6. workman ship and finish: all external surface and edges shall be smooth and rounded and there shall be no metallic parts or other rigid projections on t e inside of the helmet. the colour of the helmet shall be inherent white or lemon yellow. 7. mass : mass of the complete helmet excludingvisor may be exceed 800 gm and if exceeds, the mass to the nearest 30 gm shall be marked. 8. performances requirement: the helmet shall be comly all the test mentioned in is-2745-1983. 9. marking : each helmet shall be clearly and indelibly marked with the following- (a) manufacturers name or trade mark. (b) size with colour. (c) year of manufacture, with or with-out vi, fire bell , specification :fire bell as per is: 928-1984, hose winding machine, specification : specification for hose binding machine (manual) carbon steel, as per is: 3744 hose binding machine is used to firefighting hoses to the shanks of couplings, using copper/g.i. wire.itssimpple rugged design ensures long and trouble free operation, and it an easily operated by a single person, with minimal training. different sizes of couplings can be bound using the adaptors provided. brief description: hose binding machine, as per is:3744, made of carbon steel and c.i graded material. the machine shall be suitable for binding firefighting hose on hose coupling shanks using copper or g.i. wire. male and female abaptors of different types and sizes, for binding of hoses can be supplied along with the machine(optional). 1.0

Prefab Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others