Latest prefabricated canopy Tenders | Government prefabricated canopy Tenders

Central Government And Public Sector

CTN :45063818

12 May, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of item no.1 - cs cold rolled sheet as per specification attached , item no.2- structural steel plate as per specification attached , item no.3 - ms angle 50 x 50 x 6 mm as per specification attached , item no.4- structural steel channel as per specification attached , item no.5- steel flat isf as per specification attached , item no.6- isa angle structural steel re-rolled as per specification attached , item no.7- ms flat isf as per specification attached

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

CTN :44942563

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.m-2.04.26.16 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope, all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods.junk kutchra, spring wire ,screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :44942567

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.f-1.04.26.15 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods.junk kutchra, spring wire ,screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot(above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :44942568

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.q.04.26.14 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel. wire & wire rope,all types of chains, all types of sleeper , shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt, grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :44934800

27 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms sweeping items include rusted iron, cooler bodies, rusted hand thela, steel chair, 3 & 4 seater bench , tin, ms/gi wires, small cut pieces of ms/gi sheets and pipes, gi sheet made cable tray, paint drums, leacky cutup, deshaped oil drums cap-200/210 ltr, epm cover, stretcher, rusted chair,desk, rusted almirah, deshaped grease drum with or without cap, spray cans, claw bars, and body-side filters. the lot also consists of various rusted or corroded structural fragments such as sheets, plates, perforated mesh (jali), angles,dust shield, pipes, flat rods, nuts, bolts, rivets, lightweight springs, rusted light weight structural item made of sqare, pipe, flate, angle,rounds,pipes etc. locking plates, jumbled wires, barbed wires, rods of assorted sizes, binding strips, rusted tmt bars, bottle holders, clamps, fl fitting covers, different typ of filters, x-pm jali, fan components (covers, blades, heads), motors covers, mcb cover boxes, sealing rings, flex board casings, train nameplates, electrical components (with or without negligible nf/rubber attachments), and other miscellaneous typs items. this scrap may include other known or unknown junk/sweeping materials. all items are unsuitable for railway use. remarks: - hammering allowed to removed fiber, ply, plastic, paper etc. conditions: (1)the lot will be sold on an "as-is, where-is" basis, and the provided weight is only an visual estimated. (2) no claims regarding the quality, quantity, or condition of the material will be entertained after the sale. (3) if any types of heavy material like axle box housing, controll arm, buffer plunger, buffer casing, hanger, are found under the lot will be retained at the time of delivery.(4) purchaser are requested to visit the lot condition be fore bidding. location: - south - east side of oil godownn, near boundry wall in area-h lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

CTN :44882261

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.p-2.04.26.11 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods.junk kutchra, spring wire ,screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot(above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :44784968

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of depot ferrous scrap - lot no.y.mms.exmp.u-1.04.26.03 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire,bmbs cylinder wire & wire rope,all types of chains, all types of sleeper, shock absorber, all types of bars & rods.junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :44760778

07 Apr, 2026 NA

Patiala - Punjab

Tender For supply of distance pipe for centre pivot arrangement to drg. no. emu/-0-6-006, item 1, alt. d/2, and specification no. irs:m-41/97 with amendment slip no.1 & 2. for corrosion resistant structural steel. [ warranty period: 30 months after the date of delivery ]

Prefabricated Canopy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government And Public Sector