Prefabricated Structure Scrap Tenders

Get complete information related to latest Prefabricated Structure Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Prefabricated Structure Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Prefabricated Structure Scrap Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

Central Government/Public Sector

CTN :41605725

06 Sep, 2025 3.21 Lacs

Bhadrawati - Maharashtra

Tender For providing and fixing of open / green gym item in palasgaon village under kuchana housing complex of majri area. - earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:1 :3 (1 cement:1 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources), providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of m - 30 grade made of c&d waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and fixing pommel horse size 2200 x 710 x 610 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing sky walker size 1700 x 710 x 1700 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and foot rest structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing single shoulder press size 1200 x 760 x 1670 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing seating standing twister size 1820 x 610 x 1520 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and twister plate structure made of m.s sheet / frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing outdoor traidmill size 1200 x 610 x 1220 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. plate. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bea

CTN :41629005

05 Sep, 2025 13.13 Lacs

Chandigarh - Chandigarh

Tender For special repair for non residential various buildings i in campus of pec (new academic block, new administration block, environmental block, hydraulic lab, structure lab, metallurgical and lab, admin block irrigation dept., extension to irrigation lab

corporations/Associations/Others

CTN :41650676

08 Sep, 2025 NA

Gondia - Maharashtra

Tender For preparation of planning, detailed hydraulic/structural design, detailed drawings and designs notes of various structure on canal systems of irrigation projects including vetting

CTN :41587309

16 Sep, 2025 5.49 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of supply and fixing of odop cfc plant and machinery for wooden furniture d d - air compressor stand machine , high speed beam saw with optimization software , single sided high seed auto edge bander pre , hydraulic cold press - 50ton and 2 cylinders , triple head multi boring 21x3 - 63 spindles , cnc router- working area 1300 mm x 2500 mm , panel saw 3200x410mm - 7.5hp motor , semi-auto curvilinear edge bander 0.5-2mm , dust collector 7.5hp double bag heavy duty , dust collector 5hp double bag heavy duty , dust collector 3hp double bag , 250 kva transformer level-02 , st pole 11 mtr. long , acsr weasel conductor , gi pipe , 11 kv pin insulator with pin , 11 kv pin insulator with fitting , v type 11 kv x arm , earthing complete , 11 kv 3x70 sqmm cable uppcl approved make , cable joining kit 3x70 sqmm uppcl approved make , 11 kv tpmo fixing with all material , stay complete , t-off channel , top channel , cu. z clamp , f-bracket , droper angle , clamp for top droper x-arm and t-off and cable support clamp , nut bolt of different size , erecion of double pole structure on st pole 11 mtr , laying of 3x70 sqmm xlpe cable with gi pipe , erection of single st pole 11 mtr , erection of earthing of pole with g.i. wire and rod , chemical earthing of 250 kva distrution transformer , making of 11 kv xlpe indoor kit and outdoor kits in taping of cable providing fixinging and crimping of proper size good quality lugs , painting of pole by double coating aluminum and red oxide paint , fabrication errection commissioning and testing of 250 kva , construction of t or f plinth of size 2x2x1.2 mtr , grill fencing of 11 or 0.4 kv , 500 cft-i and c - seasoning kiln steam heated , 500 cft-i and c - installation and commissiong charges , wk-610 20 hp 15hp 3hp 1 or 2h - auto double surface planer , wr-20 15hp 2hp - straight line rip saw , cc-06-08-hydraulic - hydraulic clamp carrier , an-030-5 mtr- auto glue spreader , hs-625ts - tilting spindle shaper 7.5hp , fsm-520at - four side moulder with five , yr-750 - sliding head router , yrt-115 - rectangular tenoner , yom-120 - oscillation mortiser , hcs-18-w or all optionspneumatic cross cut off saw , dt-1136 - automatic copy shaper , gs-6213-with frequency control - double face glue spreader , pr-52nda - spiral cutter head planer sander , cdt-3155a - cnc dovetail tenoner , servokon make 100 kva 250- 480 or 400v 3 phase digital micro , civil work for seasoning plant , genset 160 kva //bid details 2 / 46

Loading, Please wait...

Prefabricated Structure Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others