Latest primer sale Tenders | Government primer sale Tenders

CTN :43275571

31 Dec, 2025 NA

Mundra - Gujarat

Tender For supply of hpcl mundra terminal water tank repair works : : -dismantling of structural steel , supply of steel plates , fabrication of steel plates , supply and fabrication structural steel , supply and erection grating , supply and fab overflow nozzle 80 nb , supply and fab inlet nozzle 80 nb , double scaffolding , bottom shell plate testing , tank box up , slag blasting , zinc silicate primer 1 coat , internal tank painting , external tank painting , painting of hp logo , letter painting , supply and install 24 inch gate valve , bottom cleaning

CTN :43207656

30 Dec, 2025 NA

Panchkula - Haryana

Tender For corrigendum : supply of smart periodicals services d d - removing existing loose or foreign material completely from masonry , 15mm thick rendering in cm 1 ratio 4 as on brick or concrete , providing and applying waterproof wall putty cement based , post all repair works comma treating the surface to remove , over a coat of waterproof basecoat or primer , providing and applying 2 coats of crack master paste flexible , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3)

CTN :43275572

31 Dec, 2025 NA

Mundra - Gujarat

Tender For supply of dismant of struc steel and plates , dismant of foam seal dia 11 mtr , dimantandre install tas equipment , supply of steel plates , fabrication of steel plates , fabrication of appurtenances tk dia 11m , supplyandfab of struc steel , supplyand fab of leg support , tank box up , hydrotesting of tank , calibration of tank , double scaffolding , cu slag blast , primer 1 coat , mid coat , finish coat 2 coats , hb tank liner hbtl 3 coat , hp logo , letter painting , roof testing , hiring of manpower , sandi of mechanical shoe seals , sandf of neoprene pad , sandi of weather shield , sandi 150mm goose neck , sandi 400mm dia guage pipe , sandi 200 mm dia gauge pipe , sandi gi sprinkler riser 4inch , sandi gi sprinkler pipes 3inch , sandi sprinkler nozzles , sandi 1 inch gate valve , sandi 1inch nrv , sandi tank shell nozzle 400 mm , sandi tank shell nozzle 300 mm , sandi tank shell nozzle 100 mm , sandi tank shell nozzle 80 mm , sandi tank shell nozzle 50 mm , sandi tank shell manholes , sandi 3inch flange , sandi 4inch flange , sandi 2inch flange , sandi 16inch wnrf flange , sandi 12inch wnrf flange , sandi 8inch wnrf flange , sandi 4inch elbow 90 deg , gauge well sleeve with alm plate, brass , peso approval liasoning , fire screen wall , supp and lay 3inch pipe , supp and lay 4inch pipe , sandi 3inch gate valve , sandi 3inch ball valve , sandi 4inch gate valve , sandi pontoon vent , sandi 4inch ball valve , sandi 3inch nrv , sandi m 32 x 1 mtr anchor bolt , pcc 1 3 6 , sandi gi gratings , bottom shell plate testing , tank cleaning 11m dia

State Government

CTN :43207450

01 Jan, 2026 1.66 Crore

Bengaluru - Karnataka

Tender For the work includes clearing and grubbing of road land, scarifying the existing bitumenous road surface, construction of granular sub-base, providing wet mix macadam, applying primer coat, providing and laying bitumenous macadam, tack coat, providing and laying semi dense bitumenous concrete, constructing sub grade and earthern shoulders, construction of unlined surface drains, maintenance of slab type culvert, and providing essential road furnitures.

Central Government/Public Sector

CTN :42887331

27 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For corrigendum : certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to w

corporations/Associations/Others

CTN :43237796

05 Jan, 2026 3.13 Lacs

Madurai - Tamil Nadu

Tender For colour washing by thorough scrapping the existing wall surface (interior, exterior), applying one coat wall putty and providing 2 coats of exterior or interior emulsion paint over one coat of emulsion primer to the aee ser and revenue building.

corporations/Associations/Others

CTN :43260556

25 Dec, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For nctps i operation circle ca dn cwph aoh unit iii cleaning grit blasting and applying a coat of zinc primer and brushable ceramic epoxy material to an average thickness of 3000 microns on cooling water pump 3a discharge line pipe of unit iii dis

State Government

CTN :43234974

02 Jan, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of supply assembly erection testing and commissioning of air source heat pump water heater capacity is 500 litre type is v hp 500 immersion heaters heating capacity w is 5800 w , providing and placing on terrace at all floor levels polyethylene water storage tank isi is 12701 marked with cover and suitable locking arrangement and making necessary holes , providing and fixing ptmt extension nipple for water tank pipe fittings of approved quality and colour 25 mm nominal bore weighing not less than 62gms , providing and fixing gi pipes complete with gi fittings and clamps including cutting and making good the walls etc internal work exposed on wall 25 mm dia nominal bore medium , providing and fixing g i union in g i pipe including cutting and threading the pipe and making long screws etc complete new work 25 mm nominal bore , providing and fixing gate valve with of approved quality 25 mm nominal bore , providing and fixing ball valve brass of approved quality high or low pressure with plastic floats complete 25 mm nominal bore , providing and fixing polyethylene aluminum polyethylene pe alpe composite pressure pipes conforming to is is 15450 uv stabilized with carbon black having thermal stability , steel work welded in built up sections framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required

CTN :43207910

06 Jan, 2026 6.99 Lacs

Delhi - Delhi

Tender For supply of making a ms shed spotting length 20ft , gi paint coated sheet , making a ms gate with ms pipe , enamel paint 2 coat and 1 coat primer , providing and laying mat floor tiles of size 400x400mm , construction of flooring on indoor open area , providing and laying creamic glazed wall tiles , ruff plaster 12mm , solid brick masonry using pre cast solid bricks , providing and fixing ms grill , providing and fixing using materials , outer wall cement plaster 20mm , providing and installation drain pipe , roof repair size 22x22 , dismantling tile work in wall and kota stone in floor , disposal of building rubbish and malba , bio medical waste garbage station four colours

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

Primer Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government