Latest pulley spares Tenders | Government pulley spares Tenders

Central Government/Public Sector

CTN :43593045

03 Feb, 2026 NA

Bhusawal - Maharashtra

Tender For supply of s.s. wire rope for three pulley type regulating equipment (8 mtrs length) as per rdso specification no. ti/spc/ohe/wr/1060 (06/2006) with a&c slip no.1, 2, 3 & 4 or latest. (as on date of opening of tender). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43547703

31 Jan, 2026 NA

Raigad - Maharashtra

Tender For tender for supply of bar polished ss 304 , 12mm. , round bar aisi304 dia20mm , barroundssais1304 dia25mm , ss round bar 50 mm dia 304l , ss round bar 3 inch dia 304l , ss round bar 4 inch dia 304l , rod ss 316 1inch dia , round bar 2inch em24 6 m , round bar ss 304l dia. 40 mm , length , round bar ss 304l dia. 60 mm , lenght 6 me , round bar ss 304l dia. 80 mm , lenght 6 , round bar ss 316l dia. 40 mm , lenght 6 , round bar ss 316l dia. 60 mm , lenght 6 m , round bar , en8 size- 20mm dia. std length , round bar , ss 316l size 25mm dia. std len , round bar , ss 316l size 75mm dia. std len , round bar ss 304 , dia 6 mm length 3-4 me , round baren8 3/4inch dia , round bar 2 inch en8 20me l , round bar ss410 size 120mm , round bar 316l 2 inch , 5-6me l , round bar 1-1/2 inch en-8 , round bar 1inch en8 , pneumatic grinder , 4 inch , cp3450-12ac4 , mini pneumatic die grinder , cp 9107 , allen key set , 10 sizes- 1.5 mm to 12 mm , tool box with tools as annexure , paint remover sp-98-s4. , rust loosener spray cans tf-77 400ml , stanvac z 730 steelweld amm , measuring tape , 5 meter-metalic , pneumatic drill machine cp9792c , pneumatic reciprocating saw cp7900 , chain pulley block light wt. 1/2 t x 3 m , chain pulley block light weight 1t x 3me , chain pulley block-cap. 3ton , 4meter lift , chain pulley block light weight 5t x 3me , chain pulley block light weight 2t x 3me , d-shakle 0.5 mt , d.shakle scr 1 mt , d-shakle 2mt , d-shakle scr 3 mt , d-shackle 5 mt , d shackle 10 mt.cap , polyster flat belt sling 5mt x 6mtr , flat webbing sling , 1t x 2me , flat webbing sling , 2t x 2me , polyster webbing slings 5mt x 3meter , web sling 1t x 3 me , sling web.flat 2t x 3me l , sling wbb cap-2t , l-5me. , eye bolt 8 mm. , eye bolt m10. , bolts eye as m12. , eye bolt m14. , bolts eye as m16. , eye bolt m18. , bolts eye as m20. , bolts eye as m24. , eye bolt m27. , bolts eye as m30. , sling 0.5 t x1.5 m long. , chain pulley 1tx10 m cha , plier combination 8 inch , screw driver elec 12 in , s-dvr is849/1971 , screw driver insulation 8 inch , punch centre 3/16x4inch , tub spanner set 6-22mm , allen key 1.5 to 10mm , t handle with allen key , allen key 1/16 to 3/8 inch , hammer sledge 5p , hammer 1 kg with suitable wooden handle , chisel cold flat 5/8 inch x 6 inch , chisel cold 3/8 x 6 inch , chisel cold 3/4 inch x 8 inch , wrench adj.34x300mm-12 inch , slide wrench size- 6 inch x 3/4 inch , box spanner set , nose plier 8 in , line tester elect 500v , d spanner set double ended 6mm to 22mm , spanner ring double ended size 24/27 mm , scr dvr set taparia 812 , ring spanner sets 6mm to 22mm , allen key 5.0 mm , allen key 6.0 mm , pipe wrench 12 inch -300x4 , pipe wrench 18 inch -450x6 , wire stripper for removi , hacksaw frame , 12 inch , hacksaw blade , 12 in , hss , hacksaw frame , 6 inch , hacksaw blade , 6 inch , tubular spanner 12 x 13mm , measuring tape 50me , carbide drill bits 4.0 mm , carbide drill bits 5.0 mm , carbide drill bits 6.0 mm , carbide drill bits 7.0mm , carbide drill bits 8.0 mm , electrician tool bag , polyster , wtrprf , aluminium tags for tagging as per sample , rtv silicone sealant , digimatic vernier caliper , 12 inch , vernier caliper 0-300 mm , measuring tape , 5 meter-metalic , luxmeter (range-0-50000 lumens) , hammer drill machine 13mm , soldering wire lead composition , soldering flux 500 gr , cordless portable drill machine , drill machine kpt -561 upto 10mm 240vac , brush painting 3 inch width , heat sink compound paste , outside micrometer , 0-25 mm , flat / flat , union ct ss304-6mm odtube , tee male ss304 1/4 inch nptx6mm odx6mm od , male connector 1/4 inch nptm x 6 mm od tube , tee 6mm od tube with singal ferrule , con fmle ssnpt1/4 inch x6mm od , conn male ssnpt 1/4 inch x6mm , elbow90 1/4 inch npt6mmss304 , ss316 6mmx1/4 inch nptm elbow male connector , conn ss 1/2 inch npt(m)x6mm od , conn ss 1/2 inch npt(f)x6mm o , wsi-plug hex head ss 316 , 1/8 inch npt(m) , ss316 6 mm od x 1/8 inch npt male connector , n

CTN :43521424

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of supply and replacement of engine oil , supply and replacement of oil filter element , supply and replacement of fuel filter , supply and top up of coolant , supply and replacement gear oil , supply and fixing of sider rear view mirror , supply and fixing wiper control switch lever left , checking and replacement of rubber bushes of top wishbone and lower wishbone and anti roll bar , repair and cleaning of gear box assembly , supply and fixing of timing belt and timing belt idler , change vacuum hoses for vacuum modulator and turbocharger and egr valve and throttle valve , assembly of ve battery cable , supply and fix fuse box or relay and power steering reservoir , m and l for greasing of all wheel bearing and hubs , checking and replacement of all drives belts water pump, belt tensioner pulley, belt idler pulley, fan pulley, alternator pulley and steering pump and inspection free rotation damaged , repair and replacement of piston assembly , assembly of clutch kit , supply and replacement of wiper and windshield waser fluid tank. , complete check of ignition system cleaning of power formed battery connection check and provide distilled water incl cost of battery fully charging , head lamp checking and replacement of head lamp with connection wire , wheel aligment and balancing complete including settle of toe and coster angel of all wheel and addition of weight , supply and replacement of left side head light , supply and replacement of rs side indicator light ) /bid number : gem/2026/b/7095828 * /dated: 09-01-2026 & & / bid document 1 / 21

State Government

CTN :43467490

16 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43083141

13 Jan, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of t and p items - d shackles 10 ton lifting capacity , d-shackle, 12 t , wire rope slings 10mmx2m , wire rope slings 12mmx2m , wire rope slings 16mmx6m , wire rope slings 24mmx4m , shackle, d, 9.5t, ally ally.st, gr.80, w/scrw pin , wire rope sling 20mmx 6 meter , wire rope slings, steel, 5t, 2m , d-shackle, 4.75, 35t , d-shackle 2 ton , eye bolt, collared, m20 , eye bolt, collared, m30 , d-shackle, 5t , d-shackle, 6.5t, assorted, 1", 80g , wire rope sling, 16mm, l: 4.5m , wire rope sling, 20mm x 4m, steel , belt sling, 5m, 5t , belt sling, 3m, 2t , chain pulley block, independent, 2t, p-series, 12m , wire rope slings, steel, 3t, 3m, 20mm , steel wire rope sling, 5t, 1m length , steel wire rope sling, 5t, 3m length

CTN :42793922

29 Jan, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of telescopic spout for silo d d - 4 inch dia rubber hoses cat no 6cfm1697v4hp , 1 inch dia rubber hoses cat no 6cfm1697p1hp , 4 inchdia hose clamps cat no 6cfm1697v4hc , 1 inch dia hose clamps cat no 6cfm1108p1hc , filter cartridges cat no 6cfm1697pfc , centrifugal fan cat no 6cfm1697ccf , drain pit cock , filter cap , hand knob , damper valve , drive shaft cat no 6lso1697dsa , drive pulley assy cat no 6lso1697dpa 3 pulleys , transfer sheve assy cat no 6lso1697tsa small pulleys 3 nos , outer sleeve assy cat no 6lso1697osa , inner cone assy cat no 6lso1697ica , lifting cables cat no 6lso1697olc , cone harness cables cat no 6lso1697chc , flange bearings cat no 6lso1697fb , clamps for cables red clamps , sleeves splice clamps i bolts at the end of wire ropes , upper clamp ring alluminium clamp , discharge cone 4mm thick alluminium clamp

CTN :43224203

17 Jan, 2026 NA

Haldwani - Uttarakhand

Tender For supply of testing and maintenance equipment under 220kv oandm division, ptcul, jafarpur - hydraulic compressor of 100 ton capacity, portable, hand operated complete with accessories/tools, compressor die sets suitable for jointing acsr panther conductor (aluminium portion), compressor die sets suitable for jointing acsr panther conductor (steel portion), compressor die sets suitable for jointing acsr zebra conductor (aluminiunm portion), single sheave pulley open type of 5 ton capacity, double sheave pulley 5 ton capacity, hydraulic conductor cutter, bolted type come along clamp, 7 bolts, for for acsr zebra conductor, bolted type come along clamp, 7 bolts, for acsr panther conductor, come along clamp 3 bolted type suitable for 7/10 swg earth wire, four sheave sagging pulley 10 ton capacity, sling 18 mm 10 mtr, sling 18 mm 5 mtr, d-shackle 4.75 ton, chain shackle 10 ton chain pulley block 3 mtr, chain shackle 2 ton chain pulley block 3 mtr, 12 mm steel rope drum of 400 mtr long, binocular camera, 220kv s/s, jafarpur, 132kv s/s, rudrapur, d-spanner set (insulated), ring spanner set (insulated) & torque wrench set. each set shall be a complete set including all standard sizes, 220kv s/s, jafarpur, 132kv s/s, rudrapur, oil sampling bottle, stainless steel 02 ltrs. capacity, 220kv s/s, jafarpur, 132kv s/s, rudrapur, 12 mm : polyamide white nylon rope, 220kv s/s, jafarpur, 132kv s/s, rudrapur, 14 mm : polyamide white nylon rope, 220kv s/s, jafarpur, 132kv s/s, rudrapur, 20 mm : polyamide white nylon rope, 220kv s/s, jafarpur, 132kv s/s, rudrapur, live line detector 220kv, earth resistance tester, earth discharge rod, torque wrench socket set - heavy duty 6.35 mm (1/4 inch) 109 pcs

Pulley Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government