Latest pulley wheel Tenders | Government pulley wheel Tenders

CTN :44481073

25 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - all kinds of mixed aluminium unserviceable scrap which comprising of wheel set earthing equipment, dome cover, return air filter, aluminium distributor valve, compressor wheel, piston casing, lp piston, aluminium fan blades, lable gauge, aluminium db body, aluminium head/block, crank case, gear case, piston released from dsl loco, different types of spare parts etc. and other similar type known/unknown itemis also included in this aluminium scrapwith/without nf/ms attachement. [may be approx aluminium =85 % and iron/ss = 15% condition: - (1)the lot will be sold on an "as-is, where-is" basis. the provided lot weight is an estimate. (2) no claims regarding the material's quality, quantity, or condition will be entertained after the sale.3. purchaser are requested to visit the lot be fore bidding. location; - in godown no - 98/06 lbpl, dbaw, gst-18%, tcs -1% , hsn code-760200, allocation-20714208

corporations/Associations/Others

CTN :44459607

24 Mar, 2026 NA

Darjeeling - West Bengal

Tender For auction sale of ferrous scrap (fire extingusher trolly type with brass cap),ferrous scrap (fire extingusher trolly type with cap),ferrous scrap (iron bed, folding table, digging pick etc),gen set 10 kva with out tlr dsl,gen set 11 kva silent,gen set 19 kva tlr mtd,gen set 2.4 kva,gen set 3.5 kva slt,gen set 30 kva slt,gen set 30 kva tlr mtd,gen set 5 kva silent dsl,gen set 5.5 kva tlr mtd,leather scrap (boot dms),machinery scrap all type,matress kapok,minilet spl,mt scrap (spare parts),plastic scrap,radiator assy mg/sumo/lv,self starter assy(als/2.5 ton tata),wheel disc all type (als/2.5 ton tata),wooden scrap

corporations/Associations/Others

CTN :44444576

23 Mar, 2026 NA

Multi City - Multi State

Tender For auction sale of sort tentage old (unsv),blanket superior og (unsv),net mosquito universal khaki (unsv),sort gen set 11.2 kva without tlr (unsv),sort fire ext (unsv),sort tyre mt 1500 x 21 (unsv),sort eng assy o/s (unsv),sort mt component (unsv),sort tyre mt 1200 x 20 (unsv),sort tyre mt 1500x21 (unsv),sort tyre mt 78x15 (unsv),sort tyre mt 1400x20 (unsv),sort gen set 5.6 kva with tlr (unsv),sort blanket o/s (unsv),sort over all combination (unsv),sort boggie wheel o/s (unsv),c & a steel scrap (unsv)

corporations/Associations/Others

CTN :44423140

20 Mar, 2026 NA

Bathinda - Punjab

Tender For auction sale of cover outer 1300x530x533 etc,cover outer 1200x20 etc,cover outer f-78 x 15 mg,cover outer 1500x21,cover outer 1500x21 etc,cover outer 1400x20,cover outer f78x15 etc,canvas old,armature assy etc,alternator assy etc,machinery o/s,plant lubricating,charging set 500 watt,road boggie wheel,woolen scrap,cotton rags,leather scrap,tentage rags,textile rags,boot ankle dms,lathe machine o/s,alluminium scrap

corporations/Associations/Others

CTN :44423152

25 Mar, 2026 NA

Ferozepur - Punjab

Tender For auction sale of air compressor /gun spray,pumping set,greaves pumps eng set,fire extinguisher,boggie wheel,sudan pump,text misc,steel bucket,jerrickan 20 ltrs,stretcher all types,bicycles,sewing machine,hydraulic jack 30 ton,hydraulic jack 12 ton,jack mg,cast & allied scraps,engine assy t-72,cap waterproof og,mild scrap,rain cap,blanket og,overall combination (dangri),plastic scrap,bty 12 v 60 ah,bty 12 v 100 ah,bty 12 v 110 ah,bty 12 v 80 ah,bty 12 v 150 ah,bty 12 v 35 ah,bty 12 v 32 ah,bty 12 v 200 ah,bty 12 v 130 ah,bty 12 v 120 ah,gen set,alluminum scrap,rubber scrap (flap rust),it/computer scrap,helmet fiber,cover outer 1300 x 530 x 533,engine assy tatra,engine assy tmb,engine assy 2.5 ton tata (125hp),bty scraps (below 32 ah),mt components, clutch plate, pressure plate etc.,cover outer 195/65r,cover outer 235 x 70

Central Government/Public Sector

CTN :44432710

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond & u/s engineering ferrous scrap and fabricated items consists of released engineering items such as l.c gate barrier set consisting of lc base, a - frame,drum axle,boom stands winch for lifting barrier, winch wheel, boom support,pedestal frames, released transformer core sheets, transformer covers, rusted angles and chanels, gates, border barriers, ferrous tables and boxes large, stands, ladders, pyramid ladders, ferrous protective boxes, overhead structure stop for railway crossing beams,angles and fittings,steel sleeper, screws, bolt and nuts, trolley wheel, bearing plate, cut rail pieces, gate lamp support, hand trolly wheels, ups and battery stands etc., and other similar items of ferrous tools and plants items in nature and signal items of signal aspects, signal ladder and arrangements,ground lever arrangements,slide, point machine cover, ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms scrap from pway, ms sheet of various sorts and sizes, cast iron rollers, liner, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, ms benches, hydralic rail bender,ferrous portion of window ac plant & water coolers, hand trolley, centrifuge for car body,car body filter, undersling water tank, sand box, flat, trough sheet, coach cut up parts, ms tank, grill gate, bins, roller of shutter, regulator empty box, sliding doors, dolley,platform shelter, engine base rail of demu, collapsible gate, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam with composite brake blocks, gi sheets, ms grill gate,grill window &stair case handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt,ladder,plate,grill, barricade, bolts, nuts, tray under frame, trailer frame, frame, empty bin, ci pipes, doors, side walls, platform pedestal, light post, boxes, rails of various sorts and sizes with/without concrete/brick/mud adhering, enclosures, tank in full/cut pieces, battery tray, ladder, all types of trolley wheels with minor nfs attachments, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, s&t panels, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, gi/ms window of fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings. pl.no. 98050126. custodian: cdms-rsf-gsd-per. location: 14th pathway rhs. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted.

Central Government/Public Sector

CTN :44432713

19 Mar, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components, end shield, air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs, cowl, rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly, coupler front plate, coupler rear plate, break liver, bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover, axle guide and racer, traction link, the bar, traction housing, spheriblock, brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, pantograph, deflector for hitachi traction motor, protective tube collars, alternator cowl of various sorts, anchor link, flushing valve, hydraulic nut,emu scrap including fan body, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , semi permanent coupler, bogie mounted brake cylinder of ac loco,traction link with bush, emu after cooler, cr tank,cbc restrictor,centre pivot block assembly with rubber bush, draw and buff gear, side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 980

CTN :44432364

19 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron steel cut up parts of condemned diesel loco no. 36109/ wds6r/hwh/er, i.e chassis with driver cab and radiator room - 01 no, air brake & feed pipe- 04 nos, truck frame finished casting with fitting- 02 nos, cattle guard- 02 nos., buffer -04 nos, main reservoir-02 nos., engine block with sump & crank shaft assembly - 01 no, rtmb-01 no, split gear and left side, right side cam gear -01 set, rectifier panel -01 no, traction alternator complete -01 no, traction motor complete-06 nos, auxilary generator- 01 no, exciter generator-01 no, lube oil filter tank assly-01 no, loco starting battery-08 nos. condition:-[1]as is where is basis [2]cutting is allowed for loading facilities only. [3] cutting time of sold loco of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [4] wheel sets with susp. tube -6 sets, axle box- 6 pairs & bull gear- 06 nos are excluded from sale.

CTN :44397634

18 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - waste scrap scomprising of aluminium dome cover and wheel set earthing equipment etc with ms attachement in sorts of sizes. this scrap includes a varity of other known or unknown items. aluminium content may be approx = 90 % and ferrous = 10 % location; - in godown no - 98/02 lbpl, dbaw, gst-18%, tcs -1% , hsn code-760200, allocation-20714208

Central Government/Public Sector

CTN :44397626

18 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - steel scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 25029860367 boxnr (2 )sr 25069760443 boxnr(3)er 25029660981 boxnr r(4) er 25029660356 boxnr . note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 04 nos(31.420 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod.not returnable items 1. foot step l 2. loaded tie rod 3.sets of pipe. lot qty. on approx basis weight 04 nos(31.420 mts) advice note no.- 25-03287 dt-02.03.26 note- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.

Pulley Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector