Pulveriser Repair Tenders

Get complete information related to latest Pulveriser Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pulveriser Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pulveriser Repair Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :41333627

12 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, instruction manua

State Government

CTN :41287244

12 Aug, 2025 7.84 Lacs

Diglipur - Andaman And Nicobar Islands

Tender For supplying, installation, testing and commissioning of equipment for setting up of water testing laboratory at je(water supply section) sd-i, apwd, diglipur. chemical parameters testing - supply, installation, testing and commissioning of bench top multiparameter ph meter edge - model - hi2020 of make hanna or equivalent with required buffer/stock solution complete having following specification:, ph electrode : hi11310 ph electrode connectivity : 1 micro usb port for charging and pc connectivity, 1 usb port for storagebattery type/life : built-in rechargeable battery with up to 8 hours of continuous usepower supply : 230vac to 5 vdc adapter environment : 0 to 50 c (32 to 122 f), rh max 95% non-condensingdimensions : 202 x 140 x 12.7mm (8 x 5.5 x 0.5 )weight : 250 g (8.82 oz)( the supplier is also required to supply 01 no. additional hi11310 ph eclectrode of same make and specification & additional 500 ml bottle of standard calibration solution of ph 4.01, 7.01 and 10.01 each , 500 ml bottle of electrode storage solution and 500 ml bottle of general pourpose cleaning solution of make hanna along with the above specified instrument set), supply, installation, testing and commissioning of bench top multiparameter ec/tds/salinity meter edge - model - hi2030 of make hanna or equivalent with required buffer/stock solution complete having following specification:, ec/tds probe : hi 763100 ec/temperature probeconnectivity : 1 micro usb port for charging and pc connectivity, 1 usb port for storageglp : yesbattery type/life : built-in rechargeable battery with up to 8 hours of continuous usepower supply : 230vac to 5 vdc adapter environment : 0 to 50 c (32 to 122 f), rh max 95% non-condensingdimensions : 202 x 140 x 12.7mm (8 x 5.5 x 0.5 )weight : 250 g (8.82 oz)( the supplier is also required to supply 01 no. additional hi763100 ec/temperature probe of same make and specification & additional 500 ml bottle of standard conductivity solution of 1413 s/cm , 5000 s/cm and 12880 s/cm each of make hanna along with the above specified instrument set), supply, installation, testing and commissioning of epa compliant benchtop turbidity and chlorine meter - model - hi83414 of make hanna or equivalent with required calibration cuvettes complete having following specification:, turbidity range : non-ratio mode: 0.00 to 9.99; 10.0 to 40.0 ntu; 0.0 to 99.9; 100 to 268 nephelos; 0.00 to 9.80 ebc turbidity range : ratio mode: 0.00 to 9.99; 10.0 to 99.9; 100 to 4000 ntu; 0.0 to 99.9; 100 to 26800 nephelos; 0.00 to 9.99; 10.0 to 99.9; 100 to 980 ebc.free chlorine range : 0.00 to 5.00 mg/ltotal chlorine range : 0.00 to 5.00 mg/lconnectivity : usbglp : last calibration data, calibration infoauto end : do onlybod/our/sour : yes (inside/outside limits)display : 40 x 70 mm graphic lcd (64 x 128 pixels) with backlightpower supply : 115/130 vac; 50/60 hzenvironment : 0 to 50 c (32 to 122 f), rh max 95% non-condensingdimensions : 230 x 200 x 145 mm (9.0 x 7.9 x 5.7 )weight : 2.5 kg (88 oz.)( the supplier is also required to supply 04 nos. additional calibration glass cuvettes for turbidity and chlorine, 230 ml cuvettes cleaning solution, silicone oil each of make hanna along with the above specified instrument set), supply, installation, testing and commissioning of water & wastewater multiparameter (with cod) photometer and ph meter - model - hi83399 of make hanna or equivalent with required calibration cuvettes complete having following specification:, input channels : 1 ph electrode input and 5 photometer wavelengthsphotometer/colorimeter light source : 5 leds with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filtersphotometer/colorimeter light detector : silicon photo detectornumber of methods : 128 max.connectivity : usb-a host for flash drive; micro-usb-b for power and computer connectivityglp : calibration data for connected ph electrodedisplay :128 x 64 pixel lcd with backlightpower supply : 5 vdc usb 2.0 power adapter

State Government

CTN :40985775

11 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of gym for strength and conditioning equipments - endurance sectiontreadmill1. machine must be designed for running with heavy duty 4 hp motor.2. should have low start up speed: 0.5 kmph or lesser.3. should have incline increments of 1% or lesser.4. low step height: 7 or lower.5. speed range: 0-20 kmh or more.6. incline: 0-15% or more.7. max user weight: 180 kgs or more.8. belt size : 61 x 22 or more9. should have at least 10 preprogrammed protocols with option for heart rate range control10. led console with feedback for time distance, calories burnt, heartrate, incline, track and more product should have en-957 or astm certification for stationary fitness equipment, curved non- motorized treadmill (self- powered)1. curved non-motorized treadmill should be capable of training the body s all energy systems as a comprehensive system, capable of offering sprinting for aerobic power development2. curved non- motorized treadmill (self powered) should be capable of offering the sports persons to experience a full speed resistance spectrum.3. variable resistance: the curved non- motorized treadmill (self powered) system should have requisite advanced drive technology enabling users to select different levels of reactive resistance, from zero to max. by simply shifting the drive control system, rehab athletes can quickly switch from resistance-free running to an all-out sled push.4. increased metabolic rate: walking with resistance on said curved non-motorized treadmill (self powered) training system should be capable of enhancing energy expenditure significantly compared to walking at the same speed on a traditional treadmill or a non- motorized treadmill without resistance.5. maximum muscle activation: ergonomic design of the curved non-motorized treadmill (self powered) training system should lead to significantly higher activation of the posterior kinetic chain muscles, particularly the glutes and hamstrings, compared to traditional treadmills.6. curved non-motorized treadmill (self powered)- training system should be capable of being operated and controlled exclusively by the force applied / generated by rehab athletes. in order to speed up, provision should be there, where rehab athlete can move to the front of the surface and to slow down, rehab athlete can move to the back of the said treadmill. provision must be there where the training system can be accelerated quickly from a cold start and matches upto the same pace as the rehab athletes intends to attain. the said system should offer an ideal solution for an eco-sustainable facility, by reducing electricity costs and carbon footprint.7. training system should have requisite technology, ergonomic design and advanced engineering solution so that rehab athletes can work hard in a completely safe training environment.the ergonomic design combined with the high- quality components and materials should be of solid, compact product with a versatile nature that endures well to suit high intensity prolong training sessions to ensure maximum durability and reliability.8. provision for proper posture control:the ergonomic design of training system promotes the correct alignment of the ankles, knees, hips and back, so that user can maintain natural posture at all- times and avoid joint and knee stress, regardless of their height and weight. system should offer the provision of simulating the experience of walking/running uphill while preserving the correct biomechanics.9. accessory kit: the training system must be provided with accessory kit which allows for a variety of pulling and pushing exercises through handles or a waist belt.10. technical specifications:a) dimensions range (lxwxh)*:190-200cmx86- 95cmx150-160cmb) console type: a minimum of 6-7 lcd display with back lightc) power supply: lps 5v wall supplyd) power requirement: 200 - 240 v (should comply with standard indian electrical system)e) resistance control: should have magnetic resistance with a min

Loading, Please wait...

Pulveriser Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government