Latest pump panel repair Tenders | Government pump panel repair Tenders

State Government

CTN :41634292

12 Sep, 2025 32.81 Lacs

Perinthalmanna - Kerala

Tender For construction of 110 kv substation thiruvaly. erection of ht and control panel, ht and control cable laying and allied termination works including dp erection

Corporations And Associations And Others

CTN :41591919

24 Sep, 2025 NA

Babina - Uttar Pradesh

Tender For operation and maintenance of electro mechanical equipments of existing matatila intakewell 45 mld and 110 mld wtp at babina under augmentation and strengthening scheme distt jhansi - routine, periodically and breakdown maintinance of all equipments, associated accessories installed at various units at matatila head works including supply,opening and refixing, transportation , loading, unloading , t&p etc., matatila headworks, routine maintinance and servicing of 320 kva d g set including all necessary spares, oil, filters, diode and lubricant as per norms, repairing and overhauling of 650 lps discharge kirlosker make pumps with following works. model mf 40-45, dismantling, carting and re-installation of pump set including testing on load at site with all labour and t&p, supply and fixing of new ball bearing-6415 and oil seal., supply and fixing of new thrust bearing-51320m, fabrication, supply and fixing of fully balanced new pump shaft made of ss 410 as per sample., reconditioning of pump shaft with rematling, machining and balancing complete in all respect., reconditioning of pump impeller with rematling, machining and balancing complete in all respect., supply and fixing of new impeller for pump as per sample and zise, supply and fixing of new shaft sleeve, chuck nut made of ss 410 as per sample., supply and filling of lubricating oil in every 6 months, supply and fixing of new fastners, supply and filling of glande packing as per size and sample., supply and fixing of new glande plate with stud and nut., repairing & maintenance of kirloskar make induction motor with following works, dismantling, carting and re-installation of motor including testing on load at site with all labour and t&p, rewinding of 75 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., rewinding of 55 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., supply and fixing of new ball bearing-nu318c3, supply and fixing of new ball bearing-6318c3, fabrication, supply and fixing of new rotar shaft as per sample and material., reconditioning of rotar shaft with rematling, machining and balancing complete in all respect., reconditioning of bearing housing with rematling, machining and balancing complete in all respect., routine greasing of induction motor bearings with high temprature jelly grease in every 30 days intervals, supply and fixing of new fastners, supply and fitting of motor connection plate with suitable size of lugs as per sample etc. complete., repairing and maintenance of 600mm size sluice valve with following works, dismantling, carting and re-installation of sluice valve with all labour and t&p, supply and fixing of spendle for sluice valve made of ss 304 as per size and sample, supply and fixing of bush for sluice valve made of gun metal as per size and sample, supply and fixing of disc and body sheet for sluice valve made of gun metal complete with all maching and finishing, supply and fixing of glande plate with studs 600mm size sluice valve as per sample, supply and filling of glande packing as per size and sample, routine servicing of ht panel, 45 mld wtp, repairing and maintenance of 300mm dia size sluice valve at desluding with following works :-, repairing of desludging valve 300 mm dia spendle brass & gun metal, tefloan clf wheel, repairing and overhauling of sluice gate 500x500 mm size at backwash outlet with following works :-, dismentaling, carting, refitting and testing with all labour and t&p required at site, fabrication, supply and fixing of new threaded spindle shaft made of ss:316 as per size and sample, fabrication, supply and fixing of new bush made of gun metal and wage piece as per size and sample, fabrication, supply and fixing of new fix and moving sheet made of gun metal as per size and sample

State Government

CTN :41023796

16 Sep, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of miscellaneous consumables for unit coh and routine maintenance work at emd-2-tg wtps,gsecl. - ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, godrej make 7 lever door lock, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, polyester webbing sling, swl 5000 kg x 3 mtr, impact wrench power/battery operated, cordless screw driver power/battery operated, flat cable 3 corex4 sqmm with copper conductor for submersible motor, painting brush size 3" (75 mm), painting brush size-38 mm, allen key set of size : 1/16" (inch) to 3/8" (inch), allen key set of size 1.5 to 10 mm, rusting clean brush, wire brush round 1.1/2", plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., hand drill machine size 13mm, britelite 1200 meters long rang torch rechargeable led flashlight with charger., drill bit set it/addision,size;2 mm to 10 mm., pvc hand gloves acid/alkali proof size 16" (yelow colour), esab earthing clamp, washing powder ( 1 kg pack ), transparant tumbler 1 ltr, pvc buckets-15ltr, painting brush size 2" (50 mm), self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, dr. back make backtol red in 1 lit. tin varnish, light gray paint size 4 liters light gray paint size >> 1 liter., rotary selector switch capacity-12amp ,3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, test leads (probes) for digital multimeter, auxiliary relay re-300 coil voltage 250v dc, jyoti make re-300 plug in type relay , coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating., plastic tool box with organizer product no.:- ptb 16 (195 x 240 x 435), integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - red., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - green., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - amber., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - white., integral led type solid state indicating lamp with lamp holder & lens for 230 v dc +/- 10 percent panel cutout, 30.4 mm dia colour blue, start push button c & s make type- rb2-ba3+rb2-bz10 (rcb2-ba3)., mushroom head stop pushbutton turn to release c& s make,type- rb2-bs54+rb2-bz10 (rcb2-bs54)., contact element -1no. code rb2be101 make c&s, contact element, 1 nc contact, c and s cat. no. rb2-be-102, 250 v ac/dc control supply switch, capacity-16amp,type-base mount., multifunction multirange timer type:-micon225 0.1 sec -10 hrs., 24/240 vac/dc, cat no: 2a5dt5, 2c/o make:-l&t, manila rope, size: 16 mm dia, manila jute rope size 12 mm, auxiliary relay of jyoti make re-300 with led indication, 4 c/o contacts for 110v ac., jyoti make re-300 plug in type relay , coil voltage 24 v,dc with led indication & 4 change over contact having 10 amp rating.

State Government

CTN :41637693

15 Sep, 2025 5.54 Lacs

Gandhinagar - Gujarat

Tender For all in comprehensive maintenance of ht & lt panel ,d.g.set and cable fault at various government building under c.p.electrical sub division 21,gandhinagar. [3rd attempt]

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

Central Government/Public Sector

CTN :41629395

23 Sep, 2025 35.69 Lacs

Katihar - Bihar

Tender For provision for the works for compliance of the observation by aviation safety at katihar. sub head- rectification or repair of ht panel, avr and provision of avr cum transformer and its associated works at katihar mssr station.

Central Government/Public Sector

CTN :41675371

17 Sep, 2025 NA

Multi City - Multi State

Tender For supply of for breaker 400 11 02 06b , fixed contact breaker 300a 11 06 04a , fixed contact breaker 400a 11 06 04b , fixed contact for isolator 200a 05 01 03 , glass fuse with holder bogf , ct for ol lat1005 , current transformer for ol lat3005 , current transformer for ol lat4005 , isolator micro switch assembly 05 05 00 , earth leakage relay 50 750ma with time lag with cbct elm7lat s 80m , glass fuse with holder bogfh , cover bolts 000110a , cover bolts 000110h , indicating lamps lab9acb , overload assembly breaker 30a 100 a 11 01 00a , incoiming gland g1 , shunt trip coils 11 09 03 , push button actuator for el test boes2 , core balance transformer cbt80m , power cable for 400 a for breaker chamber ic and og set iccb4 , fault imposing relay without base booen3r , power cable for 300 a for breaker chamber ic and og set iccb3 , core balance transformer cbt70m , terminal bushing with insulator dmc incoiming 8 mm x 25 mm t5 , no volt coil assly under voltage assly with moulding 11 04 00a , current transformer for ammeter 120 300 5 5 , thermal overload relay 12 00 21 , potential transformer ds1 , on delay timer 135 30 on , aux. contactor 220v ac boca2dn1229 , indiciating lamp with pcb mouting lab9 geb , on off rev isolator 300a k4r , resistance 139 geb , current trasfoemr for o l 15va 120 200 5 15 , on off isolator 400 a k4s , on off rev isolator 200a k3r , isolator 3 p on off k3 , vcb aux rotary switch boarc , vcb shunt trip coil 50 05 00 , potential tranformer 3 point 3 kv htptl1 , earth leakage 50 750ma and 750ma 2a dual setting with time lag with cbct elm7dlat s 80m , control relay 110v 135 110 , indicating lamp lab9 tsu ht , vcb closing coil 50 10 00 , neutral monitoring relay with resitance nrmr , voltmeter 600 for tsu -lt 130 v 0 600 so tlt , core balance transformer cbt90m , hrc ht pt fuse boabwna , aux contactor mcra022a7 , vacuum interrupter bevoo53 , ht bushing htta 3 point 3 , reset push button contact element no nc boes1 , earth leakage 50 750ma and 750ma 2a dual setting with time lag elm7dlat s , hv bushing httc , multicore bushing mcb9 , current trasformer bo400 5ctr , test off run selector switch bosrp137b , aux transformer single phase ptfx , auxiliary contactor with coil boca2dn1229 , current transfomer 60 5 15va 120 60 5 15 , current transfomer 120 100 5 15 , ht bushing with stud 3 point 3 kv htta 3 3 , ht hrc pt fuse bossabwna , indicator panel lab9 3 3kv , miniature circuit breaker bosp6 , overload relay magnatic olr3 , resistance 06 05 08 , vacuum contactor 3 3 kv bevoo61 3 3 , current transfomer coil 110 v dc indigenous bevoo49 , copper terminals with dmc bushing t5 , no actuator boes2 , nc actuator boes3 , isolator handle h9 , hrc fuse 16 amp 138 16 , hrc fuse 63 amp 138 63 , earth leakage 50 750ma with time lag elm7lat s

corporations/Associations/Others

CTN :41691419

11 Sep, 2025 NA

Kolkata - West Bengal

Tender For replacement of defective components of iron core series reactor of 180 kvar, 6.6kv capacitor for panel no. 3 of ht motor feeder with ancillary jobs at duttabagan dps under mdps.

corporations/Associations/Others

CTN :41326578

06 Sep, 2025 NA

Parichha - Uttar Pradesh

Tender For corrigendum : supply of miscellaneous electrical items and panel fans in ptpp, parichha, jhansi (up)-284305. - ht power cable (6.6/11 kv) jointing kit 1 core 800 sqmm, ht power cable jointing kit 3 core 185sqmm, ht end termination kit 185mm2, lt power cable jointing kit 3 core 300sqmm, lt power cable jointing kit 3 core 240sqmm, lt power cable jointing kit 3 core 185sqmm, silica gel blue, switch 5a.250v,make-anchor,havells, socket 5a.250v,make-anchor,havells, switch 15amp, flash type,250v,make-anchor,havells, socket 15a,250v,make-anchor,havells, 3-pin plug top 15amp,250v, make-anchor,havells, 3-pin plug top 5amp,250v, make-anchor,havells, switch board plastic for 5a 1switch+1socket, switch board plastic for 5a 3switch+1socket, fan regulater (switch size) for ceiling fan, make-anchor,havells,bajaj, cable tie (150 mm); (1pckt= 100pc), mcb 3 pole 16 amp c-type, make-abb,schneider,l&t,siemens,havells, mcb 2p, 6a,9ka,c curve, csmbs2c6,make-abb,schneider,l&t,siemens,havells, mcb dp 10a,220v ac, c curve, make-abb,schneider,l&t,siemens,havells, mcb 2p, 16a,9ka,c curve, csmbs2c16,make-abb,schneider,l&t,siemens,havells, mcb 2 pole current rating 32 amp type c, make-abb,schneider,l&t,siemens,havells, mcb 4amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, mcb 6amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, mcb 3 pole 16 amp 415v c curve, make-abb,schneider,l&t,siemens,havells, mcb, curve c,conforming iec 60898-1, 3 pole,32a,415v, 50hz,cat.sh203m c32, make-abb,schneider,l&t,siemens,havells, mcb 63amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, panel fan- 230 vacsize/dimensions: 119x119x38 mm, mounting hole to hole:104.8 mmhousing: diecast aluminum, impeller: thermoplastic pbt (ul94v-o plastic)air flow: 90 cfm or better @ 2700 rpm & powe consumption: 25 w or betterpower supply: 220 +/- 10% vac , 50 hzinsulation resistance: >100m ohm between leadwire and frame (500vdc)operating temperature: 65 degree c or betterservice life : 60000 hours or betteroperating mode: continuous operationelectrical protection class: iiiapprovals/certifications: din en 62368, ul507, csa c22.2 nr. 113, eac, ce, ukca, panel fan- 230 vacsize/dimensions: 172x150x51 mm, mounting hole to hole:162.0 mmhousing: diecast aluminum, impeller: thermoplastic pbt (ul94v-o plastic)air flow: 330 cfm or better @ 3300 rpm & power consumption: 50 w or betterinsulation resistance: >100m ohm between leadwire and frame (500vdc)power supply: 220 +/- 10% vac , 50 hzoperating temperature: 65 degree c or betterservice life : 60000 hours or betteroperating mode: continuous operationelectrical protection class: iiiapprovals/certifications: din en 62368, ul507, csa c22.2 nr. 113, eac, ce, ukca

corporations/Associations/Others

CTN :41648916

23 Sep, 2025 NA

Bacheli - Chhattisgarh

Tender For supply of design & supply of 01 set, 3 no 3.3 kv, 630 amp, ht vcb panel , installation & commissioning of 01 set, 3 no 3.3 kv, 630 amp, ht vcb panel , dmgs approval 01 set, 3 no 3.3 kv, 630 amp, ht vcb panel

Pump Panel Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors