Latest pumping work Tenders | Government pumping work Tenders

Central Government/Public Sector

CTN :43052787

23 Dec, 2025 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of mechanical lab items for m/s tangedco ennore 2x660 mw project - pneumatic test bench, portable calibrator for vacuum, u-tube manometer, inclined -tube manometer, test manometer, digital manometer, dead weight tester, vacuum tester, standard pressure gauges, hydraulic pressure gauge tester, mercury thermometer, flowmeter calibrator, digital thermograph / hygrometer, portable flue gas analyzer, aneroid barometer, miscellaneous items, standard tool box, panel wiring tool kit, tool maker clamp jaw, trimmer & alignment tool kit, coil winding machine, pressure & differential pressure calibrator portable, pressure & differential pressure calibrator table mounted, vacuum calibrator table mounted, pressure & vacuum air pump, air set, portable electro-pneumatic calibrator (1 no. each range), portable ultrasonic flowmeter, portable infrared radiation thermograph, portable infrared radiation thermometers, portable h2 gas analyser, industrial grade portable vacuum cleaner, averaging pitot tube, oil condition monitor, grinding wheel, furniture for c&i lab, erection and commissioning of supplied lab items, freight charges for complete scope of supply (up to project site)

Central Government/Public Sector

CTN :43289306

02 Jan, 2026 3.27 Lacs

Angul - Odisha

Tender For making of 20 nos of cable joint box and 10 nos main switch stand for use of various pumping works and power supply purpose at different place of bharatpur ocp

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

CTN :43211262

05 Jan, 2026 33.73 Lacs

Kutch - Gujarat

Tender For special repair work of e1-01 qtr three side rcc precast wall,gate & rcc road, colour work ofcommandant office, main line valve change, saluting manch, pumping work at stp plant atsrp group 16 bhachau, dist.kutch (including electrification) (sbd)(1st attempt)

CTN :43205690

06 Jan, 2026 1.46 Lacs

Godhra - Gujarat

Tender For providing of repair and overhauling service - hydraulic test bench; tex; yes; buyer premises,repair and overhauling service - centrifugal pump test rig; tex; yes; buyer premises,repair and overhauling service - four stroke petrol engine test rig; unicool; yes; buyer premises,repair and overhauling service - composite wall test rig; eie; yes; buyer premises,repair and overhauling service - force convection heat transfer test rig; labtech; yes; buyer premises,repair and overhauling service - windows air conditioning test rig; napolieon; yes; buyer premises,repair and overhauling service - air conditioning test rig; unbrand; yes; buyer premises,repair and overhauling service - thermal conductivity of insulating powder; labtech; yes; buyer premises,repair and overhauling service - vibration test apparatus; swarg system; yes; buyer premises,repair and overhauling service - lathe machine; bhavya; yes; buyer premises,repair and overhauling service - shapper machine; machtexim; yes; buyer premises,repair and overhauling service -

CTN :43144625

01 Jan, 2026 NA

Kolkata - West Bengal

Tender For supply of lathe with standard accessories , drilling machine,free standng typ - 11 - 2 inch , double grinding machine 8 inch , milling machine , pipe profile cutting machine , 6 inch vice on each work bench , welding trans_remote ctrl and stndard equip. , welding station with welding table , hydraulic press of 15 t , grinding machine for hss drills up_30mm , transportable welding transformer , portable welding machine , hydraulic pipe bending machine , pneumatic driven test pump , pneumatic driven pump_me tightening tool , hand driven hydraulic pump and cylinder sets , calibrating instrumnt_temperature sensor , calibrating instrument_pressure sensors , multimeter , clamp-on ampere meter - 500a , megger - 500 - 1000v , thermal imager , clamping tool for hydraulic hoses , vacuum pump for refrigeration plants , service case for refrigeration plants , electric pipe bender 0-40mm , electrical pressing unit , gas welding cabinet complete , welding electrode cabinet complete , automatic halogen detectors , complete gas central on main deck aft sb , feeler gauge , poker gauge , 20 m welding cable on reel , lockers of free standing type , wall mounted tool boards , work bench with drawers , vice , electrical test switch board , 6 inch vice , wire splice vice approved by owner , doc_lathe with standard accessories , obs_lathe with standard accessories , doc_drill machine,free stndng typ - 11 - 2 inch , obs_drill machine,free stndng typ - 11 - 2 inch , doc_double grinding machine 8 inch , obs_double grinding machine 8 inch , doc_milling machine , obs_milling machine , doc_pipe profile cutting machine , doc_6 inch vice on each work bench , doc_wldng trns_remote ctrl and stndard equip , doc_welding station with welding table , doc_hydraulic press of 15 t , doc_grinding machine_hss drills up_30mm , obs_grinding machine_hss drills up_30mm , doc_transportable welding transformer , doc_portable welding machine , doc_hydraulic pipe bending machine , obs_hydraulic pipe bending machine , doc_pneumatic driven test pump , obs_pneumatic driven test pump , doc_pneumtic drvn pump_me tghtening tool , doc_hand driven hydraulic pump and cyl. sets , doc_calibrating instrumnt_temp. sensor , doc_calibrating instrument_pr. sensors , doc_multimeter , doc_clamp-on ampere meter - 500a , doc_megger - 500 - 1000v , doc_thermal imager , doc_clamping tool for hydraulic hoses , doc_vacuum pump for refrigeration plants , obs_vacuum pump for refrigeration plants , doc_serv case for refrigeration plants , doc_electric pipe bender 0-40mm , doc_electrical pressing unit , doc_gas welding cabinet complete , doc_welding electrode cabinet complete , doc_automatic halogen detectors , doc_complte gas central main deck aft sb , doc_feeler gauge , doc_poker gauge , doc_20 m welding cable on reel , doc_lockers of free standing type , doc_wall mounted tool boards , doc_work bench with drawers , doc_vice , doc_electrical test switch //bid details 2 / 65 board , doc_6 inch vice , doc_wire splice vice approved by owner

Pumping Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector