Latest purge meter Tenders | Government purge meter Tenders

Central Government/Public Sector

CTN :41118010

12 Aug, 2025 NA

Delhi - Delhi

Tender For supply, installation, commissioning & operation (for 5 years) of track based rail gauge face lubricator 36 nos. (electronic type for 1km) complete system as per rdso's technical specification in gd & gq 'a' routes (ndls-gzb-cpyz & ndls-pwl sections).

Central Government/Public Sector

CTN :41118015

12 Aug, 2025 NA

Delhi - Delhi

Tender For supply, installation, commissioning & operation (for 5 years) of track based rail gauge face lubricator 38 nos. (electronic type for 1km) complete system as per rdso's technical specification in 'c' route at hnzm-ptnr-andi section.

State Government

CTN :40950747

28 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25

Central Government/Public Sector

CTN :41118655

23 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply & installation of aerosol fire detection and suppression system cartridge (100 gm + 100gm) as per the technical requirement specified in annexure - g1 of rdso specn. rdso / pe /spec/ ac / 0192-2018 (rev.1) and rdso letter no. el / 7.1.108 / sbc / main dated 07.01.22. all necessary modifi cation, clamping arrangement and accessories required for installation of this item shall be with the scope of this supplier. make acceptable - firepro,stat - x, pyrogen , hafex, dspa. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41101386

26 Jul, 2025 NA

Damanjodi - Odisha

Tender For tender for supply of spares for parker make hydraulic system e e - technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document , technical specification as item specification document

CTN :41114659

28 Jul, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of drone flg sml , vr drone sml , drone sensor integration and testing eqpt , gps testing eqpt along with proprietary software , flight controller assembly programming station , battery charging station , battery repair station , drone service tools , 3d printer , 3d scanner , laser machine for engraving and cutting , cnc router machine , fcb and esc training platform , gps training module for embedded platform , thrust measurement training system , battery management training system , drone gimbal training platform , drone training spare parts kit , unassembled drone training part kit , drone sensor trainer kit , advanced microwave integrated circuit platform , antenna training system , esd work bench , camc , flying and technical training

CTN :40886030

23 Jul, 2025 1.40 Crore

Darjeeling - West Bengal

Tender For corrigendum : supply of op tr guard rail system crash barrier single head type a all as per technical specification and store list attached , gabion mesh units all as per technical specification and store list attached , reinforced concrete pipes hume pipe all as per technical specification and store list attached , quick setting compound bag of 25 kg all as per technical specification and store list attached , curve alert system all as per technical specification and store list attached , 200 mm thick granular sub base all as per technical specification and store list attached , geocell as per technical specification and store list attached , geotextile as per technical specification and store list attached

CTN :41093324

05 Aug, 2025 NA

Bardhaman - West Bengal

Tender For replacement of two carriages with control system of unit7 technical building, dpps with 01 no. passenger elevator and 01 no. goods elevator.

CTN :40307688

18 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for rafale aircraft - rag,wiping, packing retainer, bolt,plastic, bolt,plastic-red, lighting system, washer,flat, pre-formed packing, cockpit light bulb, glow plug, strap,tiedown,electrical components, screw,machine, o-ring, decal, closure, bolt,plastic, filter element,fluid, brake fluid,automotive, ring, pre-formed packing, pre-formed packing, screw,machine, lubricating oil, weapons, filter cartridge, rustremovalsolvant, audio kit foam, cover, spring, filter cartridge, chinstrap, adhesive, parts kit,oxygen mask, o-ring, packing with retainer, sealing compound, green locking varnish nuclass:2h269, day/night distress signal, jugular assembly, hardener,adhesive, insulation sleeving,electrical, detector,clogging-fuel, connector,plug,electrical, closure, lead,electrical, strap,webbing, inspection penetrant, filtering element, washer, bolt,plastic, primer coating, packing,preformed, oil repellent protection and lubrication or weapons/nuclass:2c095, neoprene adhesive, lining,helmet,shock absorbing, grease isoflex topas nb52, tube assembly,metal, dessicator, fuse, o-ring, hydraulic hose, cutting fluid, cleaning compound,solvent-detergent, adhesive 50 ml tube, card, bag,plastic, paint, rubber, nut,self-locking,plate, eru chassis, cleaning compound,solvent, adhesive, desiccating cartridge, ethyl alcohol, technical, ita/inu cable, fixing set for inu support, tape,pressure sensitive adhesive, clamp, polyurethane coating, tape,pressure sensitive adhesive, liner,flyers helmet, sealing compound, coupling butt, grease cartridge, silicon cartridge, coating, insulation sleeving,electrical,spec, stop-ring, safety valve, safety valve, coating compound,nonslip, coating compound,nonslip, gm80 polyester filter, rubber sheet,solid, setscrew, setscrew, insulation blanket,thermal,aircraft, seal,nonmetallic round section, guide,positionning, air duster(compressed air canister, fma switches case, equipped cable, isopropyl solvent(ipa)ispropanol, remover,electrical contact, o-ring, hmd liner, hmd liner, detector, leak 400ml sr, lock-wire, bearing cage and needle rollers, adhesive, overhead lighting module, overhead lighting module, non resettable shock indicator, thread, tube assembly,metal, sealing glue, cover, o-ring, terminal board, terminal,lug, indicator lamp, adhesive, set of repair jack, leak detector spray, rps container

CTN :40865390

24 Jul, 2025 77.00 Lacs

Jirania - Tripura

Tender For corrigendum : e-tender (2nd call) for procurement of laboratory instruments, equipment, appliances for the college of veterinary sciences and ah, rk nagar under the nec funded project for the year 2025-2026 - biosafety cabinetclassii, a 2 with accessories and power back up (bacteriology)-- the biological safety cabinet should be of class ii, type a2 designed in compliance with international standards the biological safety cabinet quoted instrument model must have international standards test likensf, tuv nord, en 12469 certification. certificate copy must be provided along with the technical bid. working area should be around 4foot. it should have exterior dimension w x h x d of 1300x 1568 x 800 and interior dimension wxhxdof 1200x 780x 630 it should have 1 piece grade 304 stainless steel or thermos scientific smart coat interior itshouldhavefeatureforpersonalprotection,sample protection, cross contamination protection and environmental protection. it must utilize brushless dc motor technology which uses significantly less energy with less heat emission provision compared to traditional ac motor technology to ensure lower levels of energy consumption. it should have 10 sloped front for exceptional comfort and ergonomics thesystemshouldbedesignedwithdualmotor. the motor must automatically adjust or control fan speed in real time to maintain constant airflow during filter loading or temporary obstruction. air flow direction: vertical laminar flow & air intake across front opening and 70% recirculation. filter: high performance particle air filter h14(hepa en1822), filtering efficiency 99.995% mpps or better. energy saving mode when cabinet not in use with maintaining sterility. continuous airflow helps to maintaina sterile environment, evenwhen the cabinet is not in use. thesystemshouldhaveindependentsensorstodetect pressure changes across the exhaust and down flow plenum/ air velocity and should indicate alarm signal when a 20-30% change in inflow/ exhaust or down flow occurs. control panel and performance monitor displays inflow/ down flow velocities, hours of use etc. to verify proper cabinet operation. frontglasswindowshouldbeeasilyloweredfor thorough smart cleaning of inner surfaces and designed to protect users by maintaining inflow, even when the window is lowered. the uv light must be quoted which should be programmable from 30 min to 24 hrs. in minimum 30 minutes increment to shut off automatically. the settings must allow the user to program the timer. the cabinet noise level must be less than 63 db(a) as measured in a sound proof room to promote more comfortable and safer working habitsof the user a per nsf/ ansi 49. the controller must be located on a slanted frontpanel so it is easy to see from a seated working position in front of the cabinet. control panel should be a large digital color touch screen display with health monitoring system, valuable safety and performance data with constant read-out of downflow/ inflow velocities and hours of operation in real-time, number of hours of use on the hepa filters. the front window sash must be angled 10 sloped front for operator comfort. two pieces of removable and autoclavable stainless steel arm rest should be provided for operator s comfort without disturbing the air flow. the system must have audio visual alarms to indicate when inflow is restricted and as well as whether front window is in correct position or not. theworkareashouldbeilluminatedwithswitchable fluorescent lamp of lighting power >120 fc or higher. suitable height floor stand without casters should be provided. in built access ports, 2 nos. (1 on each side) shouldbe available. it has single piece stainless steel work tray for easy cleaning and decontamination. warranty:minimum3year. electrical supply available: 230v a.c, single phase, 50 hz. bidder should provide printed brochure of the quoted model and details specification should be available in the manufacture website. customized model would not

Purge Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector