Latest pvc bibcock Tenders | Government pvc bibcock Tenders

CTN :39713929

07 Apr, 2025 67.54 Lacs

Thiruvarur - Tamil Nadu

Tender For providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarursubwork/packages:providing kitchen equipments and its accessories for two mess block of boys hostel and girls hostel cutn thiruvarur-supplying, installation, testing, and commissioning of 100 kg/hr gas-operated steam boiler for kitchen application including all accessories etc., as required.a) gas-operated steam boiler.design: coil type, forced circulation typemaximum steam output (@100deg c): 100 kg/hroutlet steam condition: dry, saturatedmax. working pressure: 10 kg/cm2max. operating pressure: 3 kg/cm2safety valve set pressure: 10 kg/cm2thermal efficiency: 90% +/- 2%power supply: ac, 3 ph, 415v, 50 hz, 4-wire systemb) mountings & fittings detailsmain steam stop valve- 25 mm nb-1 no.safety valve - 15 mm nb-2 nos.shell blow down valve 25 mm nb-1 no.air vent valve - 15 mm nb-1 no.isolation valve along with pressure guage - 1 no.c) feed water pump and tank. type: reciprocating, piston typepump capacity: 100 lphhead: 115 mwcoutlet steam condition: dry, saturatedd) burnerfuel: lpgtype: monoblockfuel consumption: 5.5 kg/hre) m.s. straight chimney, with ladder, base plate, nuts & bolts, template for foundation, foundation bolts, including painted with heat resistant aluminium paint and foundation etc., as required.diameter: 150 mmheight - 6 m (vertical) + 3m (horizontal connecting pipe from boiler to chimney)sheet thickness - 5 mmf) feed water tankpvc water tank capacity- 500 litretank having valves, strainer, drain pipe & level indicator, with ms structure (height-2m)tank thickness - 3 mmf) pressure reducing stationnon-ibr prs - steam pressure reducing station for upstream pressure of 10 kg/cm2, downstream pressure of upto 3 kg/cm2, complete with valves, safety valve, pressure gauges, steam trap assembly, prv, inter-connecting pipeline etc.g) softner plant along with interconnecting pipe and its accessories.capacity: 1.5 m3/hroutlet design hardness: < 5 ppmvessel moc: frppiping moc: upvcoperating pressure: 3.5 kg/cm2capacity of brine tank: 80 litremoc of brine tank: lldpeh) softener feed water pump with electrical starterflow rate - 1 m3/hrhead: 35 meteroperating voltage: 3 phase, 415 volts(make: thermax/ thermodye /southern boilers)supplying, laying/ fixing, testing and commissioning of following nominal sizes of seamless c-class heavy duty ms non - ibr steam piping plumbing inside the building (with necessary clamps, vibration isolators and fittings including valves, and flexible steam pipe for connecting to steam vessel etc.) duly insulated with fire retardant quality expanded thermal mineral wool and finally applying 0.63mm aluminium sheet cladding complete, repairing of damage to building etc. as per specifications and as required complete in all respect.40 mm (32 mm thick insulation)25 mm (19 mm thick insulation)20 mm (19 mm thick insulation)supplying, installation, testing and commissioning of tiltable steam operated double jacket rice vessel with lid of 25 kg capacity etc., as required.it is made out of a 14 swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 20 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket dhall steam vessel with lid of 75 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the bottom drain kanji. the lid is made out of 16 swg sheets. this unit has a drainage valve, ss handle, and ss stand made out of 14 swg 304 grade ss sheet with bottom.supplying, installation, testing and commissioning of tiltable steam operated double jacket milk steam vessel with lid - 100 litre capacity etc., as required.it is made out of a 14swg 304-grade ss sheet with a bottom perforation plate and funnel at the

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government/Public Sector

CTN :39663458

20 May, 2025 NA

Jodhpur - Rajasthan

Tender For supply of kit for check valve with strainer 1/2" to ftrtil pt no. 790009105 consist of following 05 ite ms 06 nos:-(1) filter to ftrtil pt no. 029602000, qty. 1, (2) release valve to ftrtil pt no. 001608000a, qty.1, (3) o-ring to ftrtil pt no. 009704000a, qty.2, (4) joint to ftrtil pt no. 029702000, qty.1, (5) ins ert to ftrtil pt no. 029702500a, qty.1. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39688188

08 Apr, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of air strainer 1/2" type-t with sintered bronze metallic capsule (filteration capacity-50 mi cron) specification :- rdso drg no- bg.cgk.5031 & clw drg.no-0/2/65/440 with latest alt. sinttered br onze specification as per rdso guide line rdso/2008/el/ms/0359 rev."0" dated 07.04.08. [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39518551

15 Mar, 2025 1.82 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : painting of electrical pole, ms pipeline, suction strainer, base plate, field switches and starters and other equipments including letter writing, etc. during monsoon 2025-26 (monsoon activity no.3) in kakri project.

State Government

CTN :39539986

02 Apr, 2025 NA

Kheda - Gujarat

Tender For supply of complete assembly of c.w. suction strainer frame with m.s. flat as per drawing and s.s. wire mesh for c w pump stage-ii,wtps.

CTN :39512373

21 Mar, 2025 NA

Delhi - Delhi

Tender For supply of ac repair - ms pipe heavy grade in floors or fixed to walls and ceiling sizes 300 dia , ms pipes heavy grade in floors or fixed to walls and ceilings sizes 200 mm , butterfly valve with all fitting of size 300mm dia , strainer 300mm dia complete all as directed by engr in charge , strainer 200mm dia complete all as directed by engr in charge , excavating in trenches 1 point 5 m wide 1 point 5 in depth for foundation , returning filling leveling watering well ramming soil in layers , removing excavated materials not exceeding 50m depositing

CTN :39446115

15 Mar, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of 100nb deluge valve , 150nb deluge valve , 100nb ms y- type strainer , 150nb ms y-type strainer

corporations/Associations/Others

CTN :37928423

14 Mar, 2025 4.87 Lacs

Bokaro - Jharkhand

Tender For corrigendum : spares for reciprocating compressor for ctps dvc - oil ring for reciprocating compressor model no 06e6299611 , valve plate for reciprocating compressor , set of gasket for reciprocating compressor , crankcase heater for reciprocating compressor , suction strainer for reciprocating compressor , oil filter screen for reciprocating compressor , piston for reciprocating compressor , piston ring for reciprocating compressor , piston pin for reciprocating compressor , piston pin lock ring for reciprocating compressor , crankshaft for reciprocating compressor , connecting rod for reciprocating compressor , main bearing for reciprocating compressor , discharge reed for reciprocating compressor , discharge spring for reciprocating compressor , suction spring for reciprocating compressor , suction reed for reciprocating compressor , oil pump assly for reciprocating compressor , thermistor spare for ms carrier make central ac system

Pvc Bibcock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others