Get complete information related to latest Pvc Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pvc Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pvc Cable Tenders.
Tender For supply, installation, testing and commissioning of 240 sq.mm xlpe armoured cable with accessories ,earthing and liasioning work for main incomer dhbvn power supply feeder at dudhmotisagar dairy, dharuhera
Tender For repair /maint ext incl lt oht lines,lt panels ,apfc panels, mccbs, earthing,ug cable ,ltpoles,street /perimeter lights and connected works at sonamarg (incl haws) under ge 970 ews
Tender For supply of supply of various types of cables mcbs distribution box for cccr project - 3core pvc insulated copper circular sheathed power cable of 06 sqmm , supply of 3core pvc insulated copper circular sheathed power cable of 04 sqmm , supply of 3core pvc insulated copper circular sheathed power cable of 1 point 5 sqmm , supply of single core pvc copper circular sheathed power cable of 25 sqmm for earthing , supply of cat 6 stp lan cable , supply of 02 pole 32a mcb , supply of single pole 16a mcb , supply of 12 way single phase distribution box
Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi
Tender For supply of set of panels to edts-355, rev-1, amd-1 to 6 (amendment-5 not applicable) without pump circuit switch gears i.e. mpcb & contactors mentioned at s. no. 36, 43 & 44 of bom of annexure-a (not required in the hv panel) for regular lhb non ac coaches. (1) low voltage panel shall be supplied as per rcf drg.no. cc-72445 alt-a or latest and additional requirement, top & bottom cable entry holes & earthing lugs shall be provided as per icf drg.no icf/sk3-7-2-082, alt-nil or latest. (2) drg.no.ls71103 alt-a anx-1&2 shall be followed for door stopper arrangement and stiffener in hv panel. (3) drg.no.sked-646 icf anx-2 shall be followed for hv panel lh & rh side holes, wsp mounting holes & provision of poly-carbonate sheet. (4) the rbc cum ebc mcb's and its indications shall be provided in the hv & lv panels as per rdso modification sheet no. rdso/pe/ms/ac/0094-2024 (rev 0) and rdso/pe/ms/ac/0095-2024 (rev 0). (5) packing instruction: pi-115 ver.3.0 [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of procurment and installation of frangiable mast for airports : : - 10m frangible lattice with mounting accessories tool set to operate rope for tilting foundation bolts and mounting bolts etc all items required for its safe installation , frp abs enclosure type i with cooling fan vent with filter with rain shroud 1 set as per annexure iv aiv 1 aiv 2 , frp abs enclosure type ii with cooling fan vent with filter with rain shroud 1 set as per annexure iv aiv 1 aiv 3 , mounting arms 1215mm x 90mm or suitable for mounting fsm type rvr sensor temperature sensor radiation shield at 1 point 2 to 2m height from base , pipe assembly for ultra sonic wind sensor diameter 51mm and length 650mm or suitable , 230v led obstruction light for airport application , lightning arrester one set as per annexure i , frangibility certificate as per specification , drawing , din rail 3 nos , din mountable 5amps sockets 5nos , din mountable single pole mcb 2 nos , din mountable earth terminals 1no , cable tracks 2 nos , light inside enclosure 1 no , din rail 2 nos , din mountable surge protector 1 no , din mountable voltmeter 1 no , din mountable 5amps sockets 2 nos , din mountable earth terminals 1no , din mountable dual pole mcb 1 no , din mountable single pole mcb 3 nos , cable tracks 2 nos , light inside enclosure 1 no , insurance freight packing , installation charges for lattice lightning arrester and earthing for instruments as per specifications per site , 2 point 5 m frangible pole with mounting accessories , foundation bolts and mounting bolts etc all items required for its safe installation , frp abs enclosure with cooling fan vent with filter with rain shroud as per annexure ii aii 1 aii 2 , mounting base clamp with slotted holes for fsm type rvr sensor universal mounting kit , frangibility certificate as per specification , drawing , din rails 3 no , din mountable surge protector 1 no , din mountable dual pole mcb 1 no , din mountable single pole mcb 3 nos , din mountable voltmeter 1 no , din mountable 5 amps sockets 5 no , din mountable earth terminals 2 nos , cable tracks 2 nos , light for enclosure 1 no , insurance freight packing , installation charges for pole and earthing for instruments as per specifications