Get complete information related to latest Pvc Gum Boot Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pvc Gum Boot Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pvc Gum Boot Tenders.
Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gumbootpvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis
Tender For supply of safety helmet , ear plugs , cotton hand gloves , safety googles splash proof , safety googles , cryogenic hand gloves , boiler suit , ear muff , face shield , hand gloves nitrile , pvc suit , gumboot , pvc hand gloves , disposable mask with exhalation mask , electric hand gloves 30 to 40kv , electrical handgloves 7. 2kv , safety jacket , extinguisher valve for 6 kg dcp s. p. as per is 15683 , extinguisher valve for 9 kg dcp s. p. as per is 15683 , pressure gauge for dcp f e , male to female connecting tube 75 kg , female to female connecting tube 75 kg , pr gauge 0 25 kg cm2 f 75 kg dcp , safety valve for 75 kg , hose disch dcp extinguisher 70 kg , disch tube w horn 4. 5kg , disch tube w horn f 6. 8 kg , safety pin assy f co2 fe 4. 5 and 6. 8 kg , wheel w stand f co2 fe 6. 8 kg , tube disch w nozzle f 10kg dcp extinguisher , cap 75kg dcp fire extinguisher , o ring for 10 kg dcp stored , landing valve , wshr hydrant cplg 63mm , wshr hydrant seat spindle , barricading tape , gasket sw ss316l graphite 4 in 150 lbs , gasket sw ss316l graphite 6 in 150 lbs , gasket sw ss316l graphite 8 in 150 lbs , gasket sw ss316l graphite 10 in 150 lbs , gskt ring n asb bs7531 x 12in 150 2tk , gskt ring n asb bs7531 x 16in 150 2tk , gskt ring n asb bs7531 x 20in 150 2tk , stud as a193 b7 nut a194 2h 1x5 1 4in 14 , stud nut as a193 b7 a194 2h 3 4x4 1 2in 8 , stud nut a193 b7 a194 gr. 2h 0. 625x3. 75in 6 , stud a320 l7 nut a194 gr. 4 5 8x3 1 4in 4 , iv 4 vlv gt wedge a216 wcb 13 cr fl 150 4in , iv 6 v gt wedge a216 wcb 13 cr fl 150 6in , safety torch , water gel blanket , safety hand lamp , windsocks stand , ambu bag , portable eye wash station ) /bid number: gem/2026/b/7063697 * /dated: 05-01-2026 & & / bid document1 / 38
Tender For supply of hooks 8mm dia suitable for shs , foundation bolts of 16mm dia ms rod , stainless steel serving platform , stainless steel cooking platform , pgi sheets chimney complete , two wheeled industrial pvc dustbin of 120 ltr capacity. , writing chair with complete cushion and rubber hand rest , writing table , dining table , dining chair made of plastic pvc material , quick setting compound , floor carpet venyle sheet of 2 mm thick , water staging platform made of ms angle , prefabricated soakage pit of 1000 ltr capacity , water dispencer of 15 ltr capacity , fire proof coating paint for panel , deep freezer of 200 ltr capacity , fire extinguisher , stainless steel sink standard size , bib cock cp 15mm as per is 781. , ppr pipes 20mm , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 45 degree 20 mm , ppr elbow 90 degree 25mm , ppr elbow 45 degree 25mm , ppr socket 20mm , ppr union 20mm , stop cock cp suitable for 20mm ppr water supply line , stop cock cp 15mm , stop cock cp 25mm , ppr male threaded socket 20 to 15 mm dia. , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to 15 mm dia , ppr male threaded elbow 25 to 20 mm dia , taeflon tape. , float valve 25 mm dia suitable for ppr pipe. , 25mm ppr tank connector. , puf insulated water tank 1000l , looking mirror 600mmx450mm , wash hand basin 500x400mm , decorative type ultra slim linear led , led security light , pvc insulated and pvc sheathed1. 0 sqmm. , pvc sheathead copper frls cable 2. 5 sqmm single core , pvc sheathead copper frls cable 1. 5 sqmm single core , pvc sheathead copper frls cable 4. 0 sqmm single core , pvc casing capping 20mm , pvc tee for casing casing 20mm , pvc elbow for casing casing 20mm , pvc circular jn box 2 to 4 way , pvc shaddle with screw , pvc square block , surface plastic box suitable for moduler switches and socket of 4 module. , surface plastic box suitable for moduler switches and socket of 3 module. , solid plate with base frame suitable for surface plastic box of 4 module. , solid plate with base frame suitable for surface plastic box of 3 module. , switch piano moduler type 10 amp one way. , switch piano moduler type 20 amp one way. , socket 10 a modular type. , plug and socket spn enclouser with 2 pole and earth metal plug and socket with 20 amps sp mcb. , socket multipurpose 3 pin 10 and 3 pin 20 amp modular type of 2 module. , insulation tape 10mtr. , exhaust fan , pvc insulated and pvc sheathed armoured electric cable 10sqmm 02 core with aluminium conductor , ceiling rose 2 to 3 terminal , mcb db 12 way 240w double door , mcb 6 amp sp 240 volts as per is 8828. , mcb 16 amp single pole as per is 8828. , mcb 20 amp single pole as per is 8828. , mcb spn 63 amps 240 volts as per is 8828. , pvc copper cable 1 sqmm single core , lightening conductors set complete , elect earthing set , inverter and battery combo for home , plumb bob iron best quality , picks axes with chiesel and point ends , showel square nose 14 gauge , fish line best quality , water bucket 13inch dia , measuring tap 3 mtr best quality , sheet cutter scissors best quality , transperant pipe 5 mm dia bore for water leveling best quality , hand glove , full body safety harness loght weight , gumboot of best quality , industrial safety helment , electric tile cutting machine with 5 nos interchangable blades
Tender For corrigendum : supply of various consumables & miscellaneous items at wtp, workshop & fire - store code: 4802000003 portable single phase welding machine. (light weight 10 kg), store code: 4802000004 portable three phase welding machine. (light weight 15 kg), store code: 4805000012 two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, store code: 4805000013 two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, store code: 4805010301 gas cutting torch cutogen esab make, store code: 4805020016 cutting nozzle size 3/64", store code: 4850120008 black glass for welding size 82.5x107.95x3 mm, store code: 4850140006 welding helmet, store code: 4850010008 welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., store code: 4921010235 portable cut-off saw/ machine size 355 mm, hitachi, japan make model no. hu-14/kpt make model no. kc355., store code: 4937020009 kpt make 100mm angle grinder model no.p 34-01, 220/240 volts, current 2.9amp, ac 600w, 1200rpm, weight 1.9kg approx, store code: 4956200002 mpact drill machine gsb-13 re of make bosch, store code: 4956110008 and drill machine., store code: 4958000019 rcc drill bit of 12 mm dia isi make., store code: 4921100032 ag-4 cutting wheel make:bosch, store code: 4937050003 grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., store code: 5801060006 carborundum universal make cutting wheel of size-350x25.4x3 mm (a-24-r5-bfw), store code: 4937050113 buffing wheel , size: 100 x 16 x 5/6 mm, store code: 5812050216 smoke grey paint, store code: 5812100001 bitiminus black paint, store code: 5813030001 apcolite synthetic enemel cascade green paint, store code: 5813030108 synth enamel white paint, store code: 5812010001 becktol red paint, store code: 5815020004 thinner 101 (asian make) thinner material, store code: 5810110101 red oxide, store code: 5801200007 painting brush size 25 mm, store code: 5801200008 painting brush size 50 mm, store code: 5801200009 painting brush size 75 mm, store code: 5801200022 painting brush,size:4"(100 mm)., store code: 4850350007 nylon wire brush size:- 6mm, store code: 4850350008 nylon wire brush size:- 8mm, store code: 4850350009 nylon wire brush size:- 10mm, store code: 4850350010 nylon wire brush size:- 12mm, store code: 4850350012 nylon wire brush size:- 16mm, store code: 4971040001 tin cutter with spring size 10" confirming to is 6087 -1971, store code: 5620240134 pen oil, heavy duty rust penetrator, packing : 500ml. code: 6030 of stanvac having following properties. non acidic, non corrosive formulation, ozon friendly, make: stanvac/crc/oks., store code: 5610030046 rust remover wd 40, 400 ml / bottle, store code: 3440080003 pvc hand gloves acid/alkali proof size 16" (yelow colour), store code: 3440080065 nitrile coated hand gloves for handling of sharp object & scrap material, store code: 3440000019 3 piece pvc suit for protection against chemicals containg pant,coat and face piece with visor, store code: 3440140001 pvc apron without sleeve 24"x48", store code: 3440060002 gumboot size- 8, store code: 3440060003 gumboot size- 9, store code: 3440060004 gumbootsize- 10, store code: 5920200018 glycerine, store code: 5150950008 rubber spider (star bush) for love joy coupling l-190, store code: 6697070067 silica gel breather for transformer- capacity 15 kg., store code: 4515010089 rubber sheet-2000x1000x3 mm shore hardnesss-50 to 60, store code: 4515010090 rubber sheet 2000x1000x5 mm shore hardnesss-50 to 60, store code: 4515118181 non metallic gasket sheet thickness 1 mm suitable for oil application