Latest pvc pallet Tenders | Government pvc pallet Tenders

CTN :40490983

17 Jun, 2025 NA

Ranchi - Jharkhand

Tender For supply of safety helmet , resuscitator or artificial respirator ambu bag , low temp protection hand gloves , electrical resistent hand gloves , ear muff , ear plug , pvc suit , cotton hand gloves , wind sock cloth , hand gloves pvc , chemical splash proof googles , dusk mask , water gel blanket

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

corporations/Associations/Others

CTN :40362129

16 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For procurement of personal protective equipment - aluminium proximity hood only , full face respirator , nitrile hand gloves , rubber hand gloves , heat resistant hand gloves , nitrile coated cut resistene hand gloves , electrical hand gloves , aluminised para aramid hand gloves , para aramid apron without sleeves , aluminised apron with sleeves , aluminised apron without sleeves , pvc chemical protective apron , para aramid full suit , aluminized proximity full suit , alumaster aluminised molten metal shoes , alumaster aluminised aramid leg guard , para aramid sleeves , personal electrical lockout tagout tool box kit , safety dangri

Central Government/Public Sector

CTN :40419887

03 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of grommet made of hard pvc with non- flammable property to suit 16 mm hole diameter as p er sse/dlx/cw/per drawing no. dlx / pc / 212 -01 / 06 / 04 conforming to grade 6 of is 5831 suitable for al ternator terminal box. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40331327

24 May, 2025 NA

Palakkad - Kerala

Tender For supply of elbow fittings to suit 8mm od pvc coated copper tube end connection: 1/4 npt (m) , adaptor 1/4 npt (m) -1/4 npt (m) matl: brass nickel plated

Central Government/Public Sector

CTN :40329168

28 May, 2025 NA

Salem - Tamil Nadu

Tender For "supply of raincoats as per specification. 1. material : fabric made of nylon and c oated with pvc. 2. nylon fabric as per identification of textile fiber to is 667 / 1981 ra 20 08. 3. resistance to water penetration, all seams and joint should be taped from inside with heat seal. 4. mass of finished material ( gsm ) 206+/-10% g/m2. 5. shirt pocket - 02 no s in front side of the jacket. 6. reflective luminous strips at rear side with a quote of "engin eering branch - salem division(engg. - sa div/indian railways" 7. visor or brim extensions : a raincoat with an extended hood might also come with a built-in visor or brim to hel p keep rain from dripping into the face. 8. full sleeves - baggies style. 9. zipper - polymer ic non-rusted with extra zipper cover having velcro wrist. 10. adjustable hood with a a djustable with tying cord. 11. full round elastic type trouser with two pockets, one o n each side. 12. breaking strength warp - 50 kg + 10 kg & weft 40 kg + 10 kg. 13. colour : b lack, blue, brown, khaki. 14. sizes required : medium, large, xl, xxl, xxxl, xxxxl. 15. bran d / make - decathalon, duck back , real, wildcraft, zoom. 16. the rain suit should be kep t in a pouch with zip with size duly marked. 17. all rain suits should have a label of man ufacturer name, size and year of mfg. 18. test certificate from any authorised nabl app roved lab for fabric & thickness required. 19. three nos sample to be submitted for app roval for feel & finish of the product by the consignee for approval within 15 days of receipt of p.o. 20. testing of rain suits will be done by us at any nabl approved lab for f abric & thickness from the bulk supplies. 21. inspection by tpa". [ warranty period: 30 mon ths after the date of delivery ]

CTN :40267480

29 May, 2025 NA

Patiala - Punjab

Tender For supply of b veh spares - 50 57 2 red reflector , 6220-000161 tale light , 50 669 3 cable , nk003042 indicator screw , nk002748 indicator screw , 50 236 seven pin plug , 5970 001033 insulation tape elecl pvc adhesive 20mm , nk002777 t band , 50 223 36 elbow to suit od 16 pipe , nk003043 fuse box screw , nk003044 fuse box , 50 223 15 bulb 24v21w , nk003193 bulb 24v21w , 50 58 16 thimble , nk000711 loom tape , nk002151 led light , 6220 000052 light unit tail light b 80 n , nk002750 wiring plastic cover , 4720 000332 flexible metalic hose , nk003098 solar light

Central Government / Public Sector

CTN :40248068

21 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of 50 mm pvc end fitting to suit flexible vinyl hose 50 mm id and 56 mm od coupled with check nut and fully to finolex cat. no. p-48 or similar. [ warranty period: 30 months after the date of delivery ]

CTN :40217290

19 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of drinking water supply releated material - pvc reducer tee-110/90mm , pvcreducer tee-140/110mm , pvc reducer tee-160/110mm , pvc reducer tee-160/140mm , pvc tee-90mm , pvc tee-110mm , pvc tee-160mm , pvc elbow-90mm , pvc elbow-110mm , pvc reducing elbow-140/110mm , pvc reducing elbow-160/14mm , pvc reducing elbow-160/90mm , pvc reducing elbow-110/90mm , pvc reducing elbow 160/110mm , pvc bend-87 degree 90mm , pvc bend-87 degree110mm , pvc bend 87 degree140mm , pvc bend 87 degree160mm , pvc reducer 110/90 mm , pvc reducer 140/110 mm , pvc reducer 160/110 mm , pvc redacer 160/90mm , pvc reducer 160/140mm , pvc end cap-90mm , pvc end cap-110mm , pvc end cap-140mm , pvc end cap-160mm , phavda (spade) make tata material , gaiti make tata material- mild steel , kulhadi make tata mild steel , tools for hand pamp , nut bolt 4 suit 2 inch , nut bolt 5 suit 2.5 inch , nut bolt 5 suit 3 inch , delivery pipe for pumping set- 3 inch , suction pipe for pupming set- 3 inch , chek valve 3 inch , pvc tape for water leakege , ac pipe 200mm pressure pipe for heavy duty , ac pipe 250mm for heavy duty , bleeching powder , pvc chair for pamp house

Central Government/Public Sector

CTN :40140620

17 May, 2025 30.98 Lacs

Ratlam - Madhya Pradesh

Tender For supply of brown tape 4 inch x 50m , cr register , fire buckets ( capacity 9/10 ltrs.) gi mild steel , round bottom painted white in side with synthetic enamel paint and out side with red synthetic enamel paint and marked "fire" , conforming to is-2545 , portable stored pressure abc type dry chemical powder fire extinguisher of 9 kg. capacity as per is: 15683(2018) with carrying handle and mounting bracket. a sample to approved , supply and fitment of acp information board made by lit vinyl eco solvent printing with lamination pasted on acp board with 1 inch hollow steel bar structure and aluminum channel finishing with lettering and printing size 38 mm x 25 mm with clips and screw of a-1 . detailed description as decided by sse/tws/rtm . supply and fixing of boards with all material t&p at various stations of rtm division. , forex bord 5 mm thick with vinayal laminated (245 sq feet) , acralic name plate ( 100 sq feet) , glow sign board (31 sq feet) , cotton blanket cover cloth material (good quality)- mixed synthetic 30% polyester and 70% cotton, tolerance 5%. gsm-100-110, bombay mill, bombay dyeing, arvind mill, or similar with size 89 inch x 56 inch. addition facility for tying facility three pair of velcro with lace of size 20x1 cm made from same material as blanket cover. color of cloth will be decided at time of supply. sample of blanket cover be got approved by this office before bulk supply. , waterproof coat full sleeves with cap/hoodis and trouser 2 piece rain suit as per specification attached required size: m-12, l-76, xl-336, xxl-245, xxxl-61 xxxxl-04 make: zeel men, wildcraft, duckback. , occupation board for running room 4 mm acp with vinyl print with installation. size - 6 x 4 feet ,80 hock in board with 100 piece indicate circle , bath room set9 1)pvc bucket 20 l=01 no. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 =01 no. (4)s s soap case = 01 no. (5) cloth hanger =01 no. (6) bath mirror pvc frame =01 no. (7) pvc d*bin 9 lit. =01 one sample to be approved. , tamper check paste(30 ml)(highly visible, viscous and fluorescent in nature), colour:orange, tip size: 2.9 mm, extra nozzle of 1 mm and 2 mm should beprovided) , supply and fitment of acp information board made by lit vinyl eco solvent printing with lamination pasted on acp board with 1 inch hollow steel bar structure and aluminum channel finishing with lettering and printing size 38 mm x 25 mm with clips and screw of a-1 . detailed description as decided by sse/tws/rtm . supply and fixing of boards with all material t&p at various stations of rtm division. , supply and fixing of various type board, as per attached annexture-a. , supply and fixing of forex board 5 mm thick with vinyle laminated , supply and fixing of acralic name plate , supply and fixing of glow sign boards , stainless steel howkins 10 ltr pressure cooker brand:howkins (detailed description/specification as per product # 1 of gem contract no. gemc511687789141401 dt.09/08/2023) , acrylic sandwich board size 6x4 feet, thickness width 05mm back & 02mm front sheet, pre drilled frame with 04 nos suitable stainless steel bolts & nuts each (studs) with laser cutting supreme & all other required accessories. & design as per drawing attached in document. , retro reflective sigma board of size 600mmx 450mm x2 mm with retro-reflective sigma strip and board remains non- illuminated as per rdso spec. no. eti/ohe/33a (12/97) rev-8 (11/2012) or latest and drg. no. ti/drg/ohe/pltbrd/rdso/00036/12/0. accepted make- firm's self. (warranty period : upto 30 months from the date of delivery.) , set of vinyl stickers as per annexure a for mela special train rake 2024-2025. , new fresh (not released of grease or oil) empty drum 200 to 210 l capacity manufactured by cold rolled steel, barrel type, 100% air tight and leak proof, metal thickness 0.8 to 1.2mm, size 571mmx890mm, internal diameter 571 (+/- 2)mm, outer diameter 585 (+/-2)mm, hole on top for filling 55 (+/-2)mm dia. air hole on

Pvc Pallet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector