Latest pvc pipe fitting Tenders | Government pvc pipe fitting Tenders

Central Government/Public Sector

CTN :42992648

27 Dec, 2025 30.00 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair/maintenance to internal wiring and renewal of led tube light fitting with sub main and dbs and certain water supply and allied work at sec 28/29 under ge chandigarh.

CTN :43258021

29 Dec, 2025 NA

Parganas - West Bengal

Tender For tender for supply of fuse 15a , nut , plate clamp(e1-4-1 by 5) , bolt m10x70(plate xiii r) , clamp mid (plate xxxi g) , d oblique e spanner 1 inch x 1-1 by 8 inch (plate-vii d) , spring inner , d oblique e spanner 16 inch x 9 by 16 inch (plate-vii d) , knob with switch (plate xg) , d oblique e spnr (9 by 16 inch x 7 by 16 inch ww) , fuel pipe (feed pump to filter) , plug(plate-xxxi aa-27) , 1.1 ltr duel fuel filter w o overflow valve (mico , d oblique e spnr (20mm x 22mm)(b5-2-4) , d oblique e spnr (19mm x 22mm) , fuel pipe(filter to pump)(l-12-1-22) , socket (24mm) , d oblique e spnr (24mm x 26mm) , lub oil filter element , single end spnr 55mm , air cleaner filter element , filter fuel primary , wiper assy front (plate ix f) , pin locking 44 dia x210 (plate xxxi n) , safety strut kit , locking spacer , seal dust (ms ser no 59) , regulator , tool kit standard(jcb super) item32 nos qty34 nos , grab sleeve , tooth (ms ser no 08 ) , feed pump(plate-z8) , ejection tool , back up tool , centrifugal oil filter (ms ser no 130) , cutter lh (ms ser no 10) , cutter rh (ms ser no 11) , bracket rear (lh) , bracket front lh , grease bucket pump with hose & angle pipe with ada , water pump assy with puller(44tc eng jcb) , fender rear lh (plate iii j) , belt wrench , rock breaker charging kit (xxv) , seal kit arm cylinder (ms ser no 97) , seal kit boom cylinder (ms ser no 96) , tapped setting kit (initial 250 hrs and every 2000 , seal kit bucket cylinder (ms ser no 98) , battery (plate viii e) , seal fitting tool , thrurst ring , impulse extractor for hub bearing seal(smt sl-06) , assembly jig , self starter assembly (ms ser no 132) , clutch assembly-4wd (plate ref-xxib) , grab sleev , internal puller , blade back 2235 mm (jcb 3dx plate a1-7-2 sl 3) , grab sleeve , grab sleeve , dipper assy (plate ref-vi i) , material handling gp bucket , shovel 1 cum (plate

CTN :42954981

22 Dec, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of tower bolts (non-ferrous metals) v2 as per is 204 (q2) , flushing cistern (q3) , metal alloy casting water tap with aerator (v2) (q3) , ptmt tap fitting (q3) , curtain pipe, sider and mounting bracket (q4) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , hydraulically regulated door closers (q3) , toilet seat covers (v2) (q4) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , toilet seat - indian style squatting pan (q3) , waste pipe (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , connection pipe with nuts (v2) (q3) , european pattern toilet seat vitreous china (q3) , urinal bowls as per is 2556 (part 6) (q3) , steel butt hinges as per is 1341 (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3)

CTN :43116614

23 Dec, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : supply of elbow pipe fitting (q4) , cpvc industrial pipe fittings, schedule 80 (q3) , commercial upvc fittings (q3) , commercial upvc pipes (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , tee pipe fittings (q3)

CTN :43220390

24 Dec, 2025 20.00 Lacs

Rupnagar - Punjab

Tender For renovation of research lab no.1 (room no 217) at 1st floor of department of chemistry in p.u. campus, sec-14, chandigarh - supply of furniture/fixture fittings, island laboratory table for overall dimension 4800mm(l)x1500mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) on each side of one drawer & below it twin swing door, 2nosstorage of cabinet of 600mm(l)having a swing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of thelab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 4200mm(l)x750mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 6600mm(l)x750mm(w)x900mm(h)modular table shall consist of 6 nos storage cabinet of 750mm(l) twin swing door, 2nos storage of cabinet of 600mm(l)having aswing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with lockingfacility. the body of storage of cabinet should be made of 0.8mm thick crca ms sheet havingdouble side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick crca ms sheet. the swingdoor should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. handles of theshutter should be pvc recessed. each storage cabinet sink module should be provided with base frame madefrom30x30x1.2mm crca square pipe having nylon adjusters. the thickness of granite shall be 18mm if required at site., wall side laboratory table for overall dimension 2400mm(l)x750mm(w)x900mm(h)modular table shall consist of 2 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. or equi

CTN :43233022

31 Dec, 2025 NA

Rangat - Andaman And Nicobar Islands

Tender For supply, fitting, fixing, installation and commissioning of high pressure washer, compressor and vacuum cleaner at newly constructed water servicing centre for vehicle at ward no.1 g.p.bakultala

CTN :43212416

07 Jan, 2026 40.03 Lacs

Bilaspur - Chhattisgarh

Tender For construction, repair & renovation of lecture hall & different area of radiology department at cims hospital building bilaspur,distrcit – bilaspur (c.g.) i/c internal water supply, sanitary fitting, electrification work etc.

CTN :43212418

07 Jan, 2026 74.98 Lacs

Bilaspur - Chhattisgarh

Tender For construction,upgradation,repair & renovation work of guest room & mess of special repair hostel at cims bilaspur, district- bilaspur (c.g) i/c internal water supply, sanitary fitting, electrification work etc.

CTN :43212421

07 Jan, 2026 26.67 Lacs

Bilaspur - Chhattisgarh

Tender For construction of new sub health centre at gadumariya, block-pussore, distrcit – raigarh (c.g.) i/c internal water supply, sanitary fitting, electrification work etc.

CTN :43212425

07 Jan, 2026 26.67 Lacs

Bilaspur - Chhattisgarh

Tender For construction of new sub health centre at rengalpali, block-pussore, distrcit – raigarh (c.g.) i/c internal water supply, sanitary fitting, electrification work etc.

Pvc Pipe Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector