Latest pvc trunking Tenders | Government pvc trunking Tenders

Central Government/Public Sector

CTN :41361126

28 Aug, 2025 5.97 Lacs

Kharagpur - West Bengal

Tender For supply, installation, testing and commissioning of extra material for installation of unitary ac in different departments /centers/schools, office etc. at iit kharagpur, kharagpur (phase ii) - "6.4 mm (¼"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "9.5 mm (⅜"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "12.7 mm (½"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "15.86 mm ( ⅝"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "19 mm (¾"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", interconnection electrical copper cables from indoor , outdoor & electrical control panel complete with 4 core 2.5 sqmm copper frls insulated cable(isi marked) with cable tie & clamp etc as required., supply & installation m.s epoxy painted fabricated stand for different size condensing unit with vibration isolators, grouting, for complete platform type stand for outdoor unit having safety railing etc as per site requirement., supply & installation of upvc drain pipe (isi marked) with 6mm thick nitrile rubber insulation from idu - 25mm dia, 40 mm rigid upvc drain pipe (isi marked) with 6 mm thick nitrile rubber insulation complete with fittings, u traps etc. & as specified to the nearest toilet with required civil works & finishing the same., supply of r-22 gas for top up, supply of r-32 gas for top up, supply & installation of good quality wooden frame (2" x 2") thick required for window ac installation, supply & installation of 16amps plug top (isi marked), supply & installation of 100mm pvc trunking with snap on trunking (isi marked), "supplying and installing following size of perforated hot dipped galvanised iron cable tray with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended fromthe ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.", 100 mm width x 50 mm depth x 1.6 mm thickness, installation, testing & commissioning of the window ,split acs ,cassette ac supplied by department. price shall be inclusive of installtion upto 3mtr of refrigerant pipe, drain pipe and cable., window acs, split acs, cassette acs, reinstallation, lifting, shifting of existing ac units (split & window acs & cassette ac)., window acs, split acs, cassette acs, dismantling of existing ac (split ac / window ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (cassette ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, buy-back of existing unserviceable ac (split ac / window ac/cassette ac) units(all type) including all copper pipes, drain pipes mounting surfaces, etc. complete. the item shall be quoted as negative item, window acs, split acs, cassette acs, decorative pelmets of required size for idus with 16 mm thick anti termite laminated board., window ac 0.75 / 1 / 1.5 / 2 tonne gi drain tray

Central Government And Public Sector

CTN :41368653

06 Sep, 2025 NA

Bangalore - Karnataka

Tender For supply of high frequency straight grinder with inbuilt gearbox and its spares for grinding of rail wheel with the following technical parameters. 1.voltage-200v, 2.frequency-300hz, 3.current-12a, 4.power consumption-2900w, 5. power output-2400w, 6.rpm-5500 to 6000, 7.weight 9kg(max), 8.mounting flang- mounting facility for grinding wheels with bore dia 20mm x 150 mm outer dia x 25 mm thickness, 9. warranty- as per irs condition,10.power supply wired, 11. wire length 5 meter, 12. accessories- 05 numbers of protective guard, 01 number of mounting flange to mount grinding wheel, 01 number of balancer with the capacityto hang the machine vertically, 01 number of spanner set to tight mounting flange. make-haller or equivalent material test certificate , warranty and guaranty certificate for high frequency straight grinder and accessories shall accompany with the supply. material acceptance will be subject to consignee inspection. [ warranty period: 30 months after the date of delivery ]

CTN :41037095

13 Aug, 2025 14.03 Lacs

Baran - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear/lt system for the year 2024-25, unit5&6, csctpp, chhabra against tn-sc-598/2025-26 (mm) - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, makeifm, or equivalent dynamic braking resistor 13, ohms/ 9600w, 10% ed, 10, sec. max, ambient 50, degree,make-iresco/equi, or equivalent, fan: axial, dia: 250, 230vac,, 50hz, 115w, air flow:1610, m3/h (specification attached at, annexure-i), fan: axial, dia: 450, 415 vac,, 50hz,480 w, air flow:4530, m3/h,speed-1360 rpm,, (specification attached at, annexure-ii), fan axial 08" ball bring, 230v ac 1p-50hz (as per, annexure-iii ), relay assly : 4 relay, 2 c/o,, 5a/24v dc, with led, indication, iron core reactor 3 phase,, 0.359mh/45a, 3 ph iron core, 117 uh/240a,, make: rishab/, transformer/epi/equi or, equivalent, 3 ph iron core, 67 uh/240a,, make:rishab/, transformer/epi/equi or, equivalent, 3 phase line choke ,in-21, amp,inductance-4.2mh,class-, f,freq-50hz,voltage-415v, 3 phase line choke ,in-21, amp,impedance-3%,class-, f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va,, class 1, ct dim.: 180{w},, 100{d}, 70{h}, window, size:20x35mm, front terminals,, resin, cast, insulation class:e,, type 2, colour:yellow, resin cast insulaed c.t, 400/5a,class-1,va-10, resin cast insulaed c.t, 400/1a,class-1,va-10, thermal overload relay range, 95-120 a, 125hp three phase submersible, pump star delta starter with 3-, position selector switch (with, auto switch), single phase, preventer, current overload, protection with short circuit, protection., aluminium ring type, terminal lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on, din conforming iec 60947-7-, 1,voltage rating-1 kv,safe for, fingers., current rating-140 a, 35, sq.mm,3 nm, current rating-192 a, 70, sq.mm,6 nm, current rating-232 a, 95, sq.mm,6 nm, copper pin type terminal, lugs conforming to, is-8337/is-5082 ,iec-, 61238,for voltage rating 1.1, kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, type terminal lugs, conforming to is-8337/is-5082, 61238,for voltage, rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine, housing) khaki color, 32 amp., 600v, 10-, 20awg, screw type, din, mounting, 41 amp., 800v, 08-, 20awg, screw type, din, mounting, mm, 125 amp., 750v,, type, din mounting, mm, 32 amp., 800v,, 20awg, stud type,, connection, clip on din, mounting, mm, 125 amp., 1000v,, on din mounting, make grey colour, screwless , spring clamp,, polyamide terminals for, interpanel wiring ,, terminal:769-251, female, 769-102 with add-on, timing, 2co,0.1s…100h,ondelay,, 230v ac, voltage-transducer, suitable for, 24v dc power supply,i/p:0-, 500v ac,dual o/p(4-20ma),, din rail mounted,, shunt resistor,, 750a/60mv,0-60mv, shunt resistor,, 175a/60mv,0-60mv, shunt resistor,, 200a/60mv , 0-60mv, thermal overload relay,1.6a-, 2.5a, 3 pole, bi - metallic,, 1 no + nc,, thermal overload relay,16a-, 25a, 3 pole, bi - metallic, 1, no + nc,, ac axial fan230 vac,50/60 hz, 6"172x150x51 mm(model no, rec-21725b2w) rexnord, make or equivalent for 1:1, replacement, ac axial fan230 vac,50/60 hz, 4"120x120x38 mm(model no, rec-22038 a2t) rexnord, make or equivalent for 1:1, replacement, transformer protection relay,i/p-, 4 nos of rtd sensors(pt-100),3, no of set points,0-300, temperature indication, range,o/p-four relay, contacts(01 c/o contacts),one, analog 4-20 ma output, contacts ,aux supply -90-270, v ac/dc,pecon make ,model, no-tr-7570 or eq

CTN :41353046

18 Aug, 2025 NA

Howrah - West Bengal

Tender For controller / timer for eppfs, specification: input voltage: 110v ac/dc with 30% ripple (80v - 140v), output voltage: 24v dc, led indications : power on, relay on, dual supply voltage, range - 0 - 3se c/min, 0-10sec/min, accuracy setting: +/- 5% of f.s., mounting type: din rail mount, as per mmdts: 19027 , rev - 3 or latest make: abb/bosch/honeywell/itc electrical components/selec/gic or similar. [ warrant y period: 30 months after the date of delivery ]

CTN :41344443

30 Sep, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - screw,csk,m5b13:j20x18.5, adhesive, socket connector, socket connector, socket connector, mechanical witness, valve, led indicator, distributeur, light block, safety module, signal analyzer, power sensor, redundancy module, power supply, power supply 0-33v, power supply 0-60v, cover, actuator con, door, front left, door, front right, axle,straight, launch cam, strap,retaining, rail assembly, manometer, 400b, pipe, utilization, hanger,cable, adaptator fitting, base-plate, tongue, trigger, plunger,detent, connector, seal, battery conn, seal, battery conn, attaching set, control surf assy, bearing, right ml, front pin, lug, ground, bus holding accesor, strap,retaining, backshell,electrica, hose, supply, solenoid valve, seal, pf aerial, plate, crtl slv,gnd saf,r, bracket,multiple, bracket,multiple, contact, irs fairing subassy, ampli/switch gps l1, antenna gps l1, solenoid valve, magazine c853 kit, cib14 board, ars assy, asg assy, amm assy, sensor, equipped, imu, safety valve, front fairing, cib11 board, actuator assembly, receiver, rear, dlr test antenna, csi board, control surface, front lock, rear lock, ac safety box, bcc-ice cable w1, psmc-ac, psmc-dc25, w1301x cable, w1302x cable, pins pinning m5, shc module v4;1, shms safety module, dlrpe resource, plug, p501 opnl, microwave unit, w1309x lmbi cable, pins pinning m6, tail end cover, bcc-ice interface, valve eq 250 bar, automat charged, saf relay+sim card, display charged, equipped hook, mounting clamp, bearing, efs cover, cpci mainframe 4u, harness w3851, equip trans module, mainframe ex1206, module, contactor, prog power supply 0, sensor flame, radar altimeter antenna, strap,retaining, strap,retaining, sleeve, knurled, dummy ir seeker rib, door assy, right ml, stand-off fuze, ahv2530-j22, hanger,cable, shaft assy sep sens, container, sens cov, spigot, t3 cable, molecular sieve subassembly, oxygen selection switches plate, adapter,straight,hose to boss, tube,bent,metallic

CTN :41252689

13 Aug, 2025 NA

Barasat - West Bengal

Tender For corrigendum : appointment of authority engineer for providing project management services for "design, procurement & construction of rcc box metro tunnel including birati ug station building & subways (with entry-exit structures) for two underground metro stations (birati & michael nagar) by cut & cover method (top down with diaphragm wall/ bottom up method with support arrangement) including architectural finishing, firefighting, water supply, sanitary installation, drainage & blt works, e&m service, ecs service, tvs services, power supply system with 750 v dc traction system including composite aluminium third rail, from ch: 6.250 km to ch: 9.840 km including all ancillary works in connection with extension of metro railway from noapara to barasat via bimanbandar-tender no. epc-2489-2024".

CTN :41341462

13 Aug, 2025 NA

Barasat - West Bengal

Tender For appointment of authority engineer for providing project management services for "design, procurement & construction of rcc box metro tunnel including birati ug station building & subways (with entry-exit structures) for two underground metro stations (birati & michael nagar) by cut & cover method (top down with diaphragm wall/ bottom up method with support arrangement) including architectural finishing, firefighting, water supply, sanitary installation, drainage & blt works, e&m service, ecs service, tvs services, power supply system with 750 v dc traction system including composite aluminium third rail, from ch: 6.250 km to ch: 9.840 km including all ancillary works in connection with extension of metro railway from noapara to barasat via bimanbandar-tender no. epc-2489-2024".

CTN :41042526

13 Aug, 2025 14.03 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxilia

Central Government/Public Sector

CTN :41338913

26 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of double action rail weld trimmer power pack version for a.t. welding rdso specification no.: tm/sm/9 dt. 16.08. 1991(second revision, 2022). suitable for 52kg and 60kg rails, shear blade for 52kg and 60kg each one set. [ warranty period: 30 months after the date of delivery ]