Latest quarry waste Tenders | Government quarry waste Tenders

corporations/Associations/Others

CTN :41266692

06 Aug, 2025 36.09 Lacs

Ahmedabad - Gujarat

Tender For providing & fixing temporary water proof mandap & other item during bhadarvi punam fair year 2025, at ambaji @ palanpur division.

corporations/Associations/Others

CTN :41208690

07 Aug, 2025 NA

Surat - Gujarat

Tender For item rate tender for repairing and renovation of carpentary works in sub zone-1 of south west (athwa) zone. - providing & fixing powder coated aluminium partly glazed and partly panelled partition using medium duty sections of hindalco, zindal, narmada, banco or equivalent approved make having section 63.50 mm x 38.10mm ( frame-.758 kg/rmt & middle section- 0.819 kg./rmt), galzing clip with 5 mm thick clear float glass of approved make including all other necessary fittings and fixtures. entire work will have to be made water proof using necessary rubber sectioned wherever required. gaps all round the frame to be filled with approved water proof sealent. bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design., providing & fixing partly panel & partly glass powder coated aluminium doors with aluminium section of hindalco, jindal , narmada,banco or equivalent approved make having poder coated outer frame leg partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / r.m. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), glazing clip (jindal section no. 19370 wt. 0.109 kg./ mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of greenlam, panama or archid make as approved by engineer-incharge including fixing brass pivot, handle, lock etc. complete., providing & fixing window having extruded aluminium colour powder coated / colour anodize section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no.: 4605,@ wt. 1.094kg/mt.) horizontal two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no : 8687, @ wt. 0.695 kg/mt.) vertical member of size 61.85 mm x 31.75mm x 130mm ( of jindal section no : 8758 @ wt. of 0.659 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8947, @ wt. of 0.456 kg/mt/section 8948, @ wt. of 0.457 kg/mt) with 5 mm thick transparent silicon sealant glass fixing to frame as per details etc., providing & fixing window having extruded aluminium colour anodize section frame main outer size 95 mm x 24 mm x 1.17 mm ( of jindal section no.: 2459,@ wt. of 0.738 kg/mt.) horizontal three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no : 8688, @ wt. 1.07 kg/mt.), vertical member of size 92 mm x 31.75mm x 1.50mm ( of jindal section no : 8933 @ wt. 1.06 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8949, @ wt. of 0.456 kg/mt/) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc., providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of jindal section no.14080, @ wt. 0.471 kg per mt) with colour powder coated alluminium frame for lovered glass ventilation with 4 mm thick figured glass as details etc. complete for ventilation., providing & fixing panels -12mm thick indian gypsum panels of saint gobin brand, screwed to g.i. gram at 200mm c/c, frame g.i. frame fabrication with 60 x 26 x 0.5mm perimeter channels as required, 155 x 5 x..55mm intermediate channel at 1220mm c/c, 25 x 10 x 0.55mm ceiling angle at 1220 mm c/c, securely fixed soflit hangers at 1220mm c/c, false ceiling angle shall not at more than 610 mm from adjan wall connecting clips, etc, as required complete as per manufacture specifactions, joints all joints of panels field and finished with indian gypsum, jointing compound, joining tapes, etc. complete including scaffolding as required complete in all respects by engineer in charge., supply & fixing of 16mm.th.armstrong classic lite square edge mineral fiber celling with 24mm grid(l

Central Government/Public Sector

CTN :40905411

28 Aug, 2025 NA

Kanakapura - Karnataka

Tender For supply of final roof element, as per drawing: lr10161 alt 'nil', packing instruction: return able & re-usable metallic pallet item should be supplied in returnable & re-usable palle t made of steel. the design of the pallet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, comp atible with each other when stacked. " able to withstand the rough handling of comm on logistic systems such as fork lifter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pall et lined with suitable material (like frp ) so as to prevent damage to the item being tra nsported. while stacking the item inside the pallet, there should be minimum use of disp osable packing. " the pallet should have firm's logo for identification. firm should als o indicate pl no., description of item on the pallet. note : 1.for packing the individual it em(s), the use of material which are not environment friendly such as wood/polyethen e/plastic is prohibited, however the environment friendly plastic can be used. 2.the ite m should be packed in such a way that it should not rub during transportation. the in- transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm from cde/rcf before initiating manufacturing. [ warranty period: 30 months af ter the date of delivery ]

Central Government/Public Sector

CTN :41238431

28 Aug, 2025 NA

Kapurthala - Punjab

Tender For supply of final roof element, as per drawing: lr10161 alt 'nil', packing instruction: return able & re-usable metallic pallet item should be supplied in returnable & re-usable palle t made of steel. the design of the pallet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, comp atible with each other when stacked. " able to withstand the rough handling of comm on logistic systems such as fork lifter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pall et lined with suitable material (like frp ) so as to prevent damage to the item being tra nsported. while stacking the item inside the pallet, there should be minimum use of disp osable packing. " the pallet should have firm's logo for identification. firm should als o indicate pl no., description of item on the pallet. note : 1.for packing the individual it em(s), the use of material which are not environment friendly such as wood/polyethen e/plastic is prohibited, however the environment friendly plastic can be used. 2.the ite m should be packed in such a way that it should not rub during transportation. the in- transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm from cde/rcf before initiating manufacturing. [ warranty period: 30 months af ter the date of delivery ]

CTN :41177160

31 Jul, 2025 8.00 Lacs

Bharatpur - Rajasthan

Tender For bid supply of medical equipment in chief medical and health and ms dhs bharatpur - item with specification, glucometer along with strips, cotton swabs & sharp containerlcd black/white display large numeric display (30 mm) traditional qc with target values assigned to qc materials units of measure based on meter ordered (mg/dl or mmol/l models) auto-shut off of meter when not in use automatic sample detection and analysis start automatic sample counter with date/time stamp for data tracking, bmw bins size: 7x10,8x12,10x14. structure: foot pedal. material: stainless steel. capacity: 5 l,7 l,11 l. color: any, stethoscope tube diameter: outer diameter 10mm, inner diameter 4.8mm. tube length 560mm. sensitivity from 3.2db to 26db in a range from 50 to 1000hz for cardiology. sensitivity 8.1db in a range from 600 hz to 1,500hz for pneumology., thermometer length of the thermometer: 300 mm (+10% variation is acceptable). length of main scale: 180mm 10% scale smallest division: shall not be more than 0.5 degree centigrade. bulb length: shall not be less than 10mm and shall not greater than 25mm. stem diameter: shall not be less than 5.5mm and shall not greater than 8mm., weighing machine (adult)retractable metal rod for height measurement. rugged construction suitable for school, gym, sports. stainless steel pan. led display. battery backup. storage of weights in memory upto 100 weights., weighing machine (infant) large lcd display max. capacity : 20 kg., graduation : 5 gm. tare weight function : hold function for recording weight. automatic switch off, battery included, muac tape measurement range: upto 45.5cm. graduation: 1mm. color coded: red (sever) 0-21cm; yellow (moderate) 21-23cm; green (normal) 23-45.5cm., digital bp apparatus measuring range: 0 to 300 mm hg. machine size: 138 x 98 x 48 mm. wrist size: 22 to 30 cm. accuracy within: _+3 mm hg. weight: 211 g., fetal doppler1.clinical purpose-to noninvasively detect fetal heart beats from the surface of the pregnant woman abdomen2.technical characteristicsa. water proof probe of 2mhz-5mhz frequencyb.should have lcd displayc.auto shut off facility to save battery power,built in speakerd. volume control facility and audio output for ear phonee.heart rate range should be from 50 to 210bpm with accuracy of +-2%f.should water proof body3.physical characteristicsa.should be handy, easy to carry4.power requirementsa.should have rechargeable battery with battery charger and adaptor5.standards and safetya.product should be ce or usfda certified6.operating user manualsa.the company should submit technical cornpliance sheet as per technical specifications mentioning the make and model of quoted item along with catalogue in the technical bid, pulse oxymeter1 oximeter, user manual, batteryfingertip pulse oximeteradults,old people, sports personoled displayperfusion index, pulse strength bar graph, saturation oxygen,pul ratesindicatorslow battery indicatorsensor fault indicatorconvenience featuresauto shut offwarrantyservice typewarrantycovered in warrantywarranty summarycontact customer supportmanufacturing defects1 year walk-in, nebulizeroperating temperature,40 deg c,warranty,12 months,useful for,asthma,allergies & other respiratory,disorders,colour,any,particle size,0.5-10 micro m,nebulization rate,0.2 ml/min,type,nebulizer,country of origin,india,capacity,medication:6ml,voltage,230v,model,choice vm-26,frequency,50 hz,storage,70 deg c,dimensions lxwxhweight12x15x14 cm2kg, ambu bagthe ambu adult should be reusable hand-operated double-walled self-inflating device. it is used to provide or assist pulmonary resuscitation in adults and children with a body weight >15kg (over 3 years old).materials:silicone rubber: inner bag, outer bag, valve disc, supporting strap, mask rim (cuff). -polysulphone (psu): patient valve housing, o-ring, patient connector, mask dome. - polyacetal(pom): inlet valve housing, screw cap (two parts), connector. - pom or polypropylene (pp):reservoir housing. - alum

CTN :41156622

30 Jul, 2025 NA

Thrissur - Kerala

Tender For konekkad road side ketti nadapatha nirmanam - material supply for 2025-26 mgnregs work, quarry waste, stone for masonry work, stone aggregate(single size): 40mm nominal size, stone aggregate(single size): 20mm nominal size, stone aggregate(single size): 10mm nominal size, coarse sand(zoneiii), portland cement, m. s. tube 40 mm dia, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40 mm)

CTN :41124038

28 Jul, 2025 15.17 Lacs

Alappuzha - Kerala

Tender For supply of materials for nregs works(quote rate for material supply inclusive of gst and staking charge) tender 6 - road work, quarry waste, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone iii ( m sand for concreting), portland cement, stone aggregate 40 mm nominal size, gravel, fine sand zone 4, interlock cc paver block 80mm thick m30

CTN :41124040

28 Jul, 2025 35.10 Lacs

Alappuzha - Kerala

Tender For supply of materials for nregs works(quote rate for material supply inclusive of gst and staking charge) tender 5 - road work, quarry waste, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone iii ( m sand for concreting), portland cement, stone for masonry works, gravel, stone aggregate 40 mm nominal size, fine sand zone 4, interlock cc paver block 80mm thick m30

CTN :41124093

28 Jul, 2025 42.81 Lacs

Alappuzha - Kerala

Tender For supply of materials for nregs works(quote rate for material supply inclusive of gst and staking charge) tender 1 - road work, quarry waste, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone iii ( m sand for concreting), portland cement, stone for masonry works, gravel, interlock cc paver block 80mm thick m30, stone aggregate 40 mm nominal size, twisted steel bars, fine sand zone 4

CTN :41124098

28 Jul, 2025 19.14 Lacs

Alappuzha - Kerala

Tender For supply of materials for nregs works(quote rate for material supply inclusive of gst and staking charge) tender 2 - road work, quarry waste, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone iii ( m sand for concreting), portland cement, stone for masonry works, gravel, fine sand zone 4, interlock cc paver block 80mm thick m30

Quarry Waste Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector