Latest radiator pump assembly Tenders | Government radiator pump assembly Tenders

Central Government/Public Sector

CTN :41477618

28 Aug, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of spares for mov actuators of auma make : : - sgp e mov torque s w drive assly sa100 , sgp e worm shaft assly sa100 single , sgp e holow drive shaft assly sa100 , sgp e compression spring sa6 dia 46 by 30 , sgp e compression spring sa100 dia100 by 5 , sgp e clutch ring sa100 z 58 , gt e mov o ring kit sa3 sa6 actuator , sgp e o ring kit for sa100 actuator , sgp e oil seal kit for sa100 actuator , gt e circlip kit for sa3 sa6 actuator , sgp e circlip kit for sa100 actuator , sgp e retainer ring sa100 dia 3 by 480 , sgp e limit switch drive assly v sa100 , sgp e declutch lever with stoper , sgp e declutch lever sa100 with stoper , gt e declutch tripp arm sa6 dia 47 by 25 by 6 , gt e return spring sa6 wire dia 2.25 , gt e subassly shaft pinion wsd 15.45 by 20 , gt e compression spring sa6 dia 6.2 by 16 , sgp e two train assembly 480 turns , sgp e limit switch 2no plus 2nc0.75sqmm 780mm , sgp e limit switch 2no plus 2nc0.75sqmm1000mm , sgp e torqe switch2no plus 2nc0.75sqmm1000mm , sgp e potentometr100 plus 100ohm dia40 4m1954r2 , ees mov pinion sa6 dia 59.08 by 26 z 32rpm , sgp e wheel sa6 z 24 dia 47.5x10 90 180 , sgp e motr md0v071 0.550 2 415y5kns ai06 , sgp e pinion sa100z 18 dia67.4 by 48 32rpm , sgp e wheelsa100z 42dia145.4 by 22 16 32rpm , sgp e motr md0v090 04.000 2 415y5knsai14

CTN :41346646

22 Aug, 2025 NA

Dimapur - Nagaland

Tender For corrigendum : supply of title 6 bolt plogh 34 unf 70mm , title 17 element filter 125 micron torque 1520 mm , title 28 house 06vsphp 1910 mm , title 1 tooth bucket , title 12 plug megnetic 34 inch bsp , title 23 switch panel , title 7 bolt , title 18 door handle left side , title 2 both plough 34 inch unf70mm , title 13 gasket fuel level sensor , title 24 switch ignition , title 8 nut 3 by 4 , title 19 bush , title 3 nut 3 by 4 , title 14 cape fuel tank , title 25 arm wiper blade assory , title 9 tooth bucket , title 20 bush , title 4 side cutter left hand , title 15 bolt m12 by 40 , title 26 throtal cable assory , title 10 strainer fuel filter , title 21 rivet nut m8 , title 5 side cutter right hand , title 16 washer 13 mm 40mm 5mm , title 27 spring , title 11 washer bonded , title 22 grease high pressure ) /bid number : gem/2025/b/6538994 * /dated: 05-08-2025 & & / bid document 1 / 21

State Government

CTN :41391853

30 Aug, 2025 3.20 Lacs

Guntur - Andhra Pradesh

Tender For supply of high density thermocol , copper wire , polystyrene sheet , brass sheet , copper sheet , oilraw linseed , liquid silicone rubber , nc putty , oil paint , sandpapers , adhesive , stainless steel , copper wire , arm cortex with cable , arduino mega , arduino uno with cable , rf module , rfid em18 , resberry pico with cable , gps , esp32s with cable , colour sensor , arduino nano , nodemcu with cable , soldering kit , max30100 , hydrochloric acid , l298n motor driver , mq sensor , dc geared motor , adxl345 , metal detector , dht11 , ultrasonic sensor , rain sensor , water sensor , sound sensor , vib sensor , soil moiture sensor , male to female jumper , female to female jumper , lm35 , copper clad laminate 100 x 70 x 1.5 mm 30 pcs set , ldr sensor , ir sensor , lm2596 , touch sensor , teensy development board , flysky transmitter with receiver , aocoda flight controller for huafei , bldc motor 1000kv , 30a esc , radiolink transmitter with receiver , touch lcd shield , tft display shield , raspberry pi pico , camera development board , battery charger with wire 2 cell , imax b6 80w 6a charger discharger , ultra torque gear servo motor , high torque stepper motor , magnetic encoder sensor module , speak voice recognition , zero board , acrylic sheet 1 , acrylic sheet2 , acrylic sheet3 , mdf1 , mdf2 , mdf3 , adhesive 1 , fevicol , canvas fabric , teak wood , pvc pipe , pvc joint 1 , pvc joint 2 , pp granules , ldpe granules , pla 1 , pla 2 , pla 3 , pla 4 , sand paper 1 , sand paper 2 , sand paper 3 , sand paper 4 , pvc sheet , thiner , screw , nail , aluminium sheet , mdf 1 , mdf 2 , acrylic1 , acrylic2 , sandpapers 5 , sandpapers6 , nc thinner , masking tape ) /bid number : gem/2025/b/6425749 * /dated: 08-08-2025 & & / bid document 1 / 66

State Government

CTN :40985789

25 Aug, 2025 3.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless conne

Central Government/Public Sector

CTN :41308855

28 Aug, 2025 NA

Ludhiana - Punjab

Tender For electrical and mechanical disconnection of 3-phase locomotives (types wap-7 & wag-9); dismantling of motorized axle from bogie and disassembly of tm and gear case and cleaning of gear case, removal and fitment of elastic ring of wap-7/wag-9 locomotive during major/minor schedule, removal and fitment of spheri blocs of axle guide and torque arm of wap-7/wag-9 locomotives and disassembly of wap-7/wag-9 locomotives motorized bogies during toh/ioh/moh schedule

Central Government / Public Sector

CTN :41252321

18 Aug, 2025 NA

Multi City - Multi State

Tender For supply of torque arm/torque support as per clw's drg no. 1209.01. 218.003 alt-2 for wag-9 loco s. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41236885

28 Aug, 2025 NA

Jodhpur - Rajasthan

Tender For supply of torque arm for wag-9 loco to abb drg. no. ib 016-00462 or latest, clw drg. no. 1209.0 1.218.003 alt-2 or latest with reference date as tender closing date. [ warranty period: 30 months afte r the date of delivery ]

CTN :41213155

18 Aug, 2025 NA

Jamshedpur - Jharkhand

Tender For supply of light weight torque multiplier along with specialized reaction arm for torque enhancer, mode l no:ht92-25 awur of m/s. norbar (or) model no: dvv40zrs of m/s. gedore or similar as per technical de tails mentioned below: (1) gear ratio: 16:1 to 25:1. (2) torque capacity: 400 to 4000 nm. (3) out put sq. dri ve: 1" (4) acurracy: + / - 3% to + / - 4%. (5) weight: 6 kgs max. (6) electronic torque transducers can be fit ted for precise torque monitoring. (7) corrosion resistant finish. make - snapon, blue point, bahco, cdi, jm williams, gedore only. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :41160990

15 Aug, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of light weight torque multiplier along with specialized reaction arm for torque enhancer, mode l no: ht92-25 awur of m/s. norbar (or) model no: dvv40zrs of m/s. gedore as per technical details men tioned below: (1) gear ratio : 16:1 to 25:1 (2) torque capacity : 400 to 4000 nm. (3) out put sq.drive : 1 inc h. (4) acurracy : + / - 3% to + / - 4% (5) weight : 6 kgs max. (6) electronic torque transducers can be fitted for precise torque monitoring. (7) corrosion resistant finish. (8) supplied with traceable calibration certificat e stating exact ratio. note: oem/authorised dealers of oem only to quote. [ warranty period: 30 months a fter the date of delivery ]

CTN :41082595

08 Sep, 2025 NA

Kanchrapara - West Bengal

Tender For supply of torque arm as per clw. drg. no.1210-01.118-012 alt-1 for wap-5 locos. as per drg.no. as mentioned in the description. [ warranty period: 30 months after the date of delivery ]

Radiator Pump Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector