Latest radiography testing Tenders | Government radiography testing Tenders

Central Government / Public Sector

CTN :40753985

09 Jul, 2025 NA

Bongaigaon - Assam

Tender For corrigendum : custom bid for services - refurbishment and dynamic balancing of hgu id fan (82-id-001) rotor tender no bns25ml114-1..1 dismantling of rotor and inspection of each elements installed in it. iocl representative may be called up for joint inspection at vendor workshop 1.2 vendor shall produce detailed inspection report and recommendations for repair/replacement of parts 1.3 spares like impeller seal, bearing housings, bearings may be replaced if required, payment for spares shall be paid in extra 1.4 vendor shall arrange for blasting and painting for rotor parts as required and as per tlt guidelines 1.5 vendor shall assemble rotor 1.6 dynamic balancing of rotor is required to be carried out and detailed report shall have to be submitted. any jobs required for successful dynamic balancing has to be done by vendor (payment is inclusive in refurbishment) 1.7 vendor shall provide dynamically balanced ready for installation rotor. any job not mentioned in scope of work shall have to be carried out by vendor for successful refurbishment of rotor (except in case shaft or impeller replacement) 1.8 vendor shall carry out necessary maintenance at their workshop and send rotor back to iocl bgr along with documents required as per approved qap vendor shall submit detailed qap for review by iocl and also offer for thorough inspection by iocl for dismantled parts and assembly of rotor 1.9 transit insurances for rotor for travel towards bongaigaon refineryin included in vendor scope.

Central Government And Public Sector

CTN :40901411

15 Jul, 2025 7.18 Lacs

Vadodara - Gujarat

Tender For supply of utility piping to process building of vdpp, fabrication, hydro testing, radiography testing, erection, hook up and support works within the premises of heavy water board facilities, vadodara

Central Government / Public Sector

CTN :40685457

03 Jul, 2025 24.49 Lacs

Panipat - Haryana

Tender For corrigendum : custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40817168

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For rate contract for hiring of field service representative services for greenray make turbines for a period of five years.

Central Government And Public Sector

CTN :40403522

03 Jul, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of industrial x ray film - very fine grained, high contrast, type- ndt-4 industrial xray film. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , very fine grained, medium speed, high contrast class-1 industrial x-ray film, type- ndt-5. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , fine grained, high contrast, high speed class-ii industrial x-ray film, type- ndt-7. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , film cutter, size 16inch or 40cm or higher but less than 20inch or 50cm. , x-ray film pvc cassette double envelope inner and outer size 12inch x 15inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 3inch x 5inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 3inch x 7.5inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 4inch x 6inch with lead intensifying screen front 0.10mm and back 0.15mm. , astm e-747 wire type iqi or penetrameter 1a, ss material. , astm e-747 wire type iqi or penetrameter 1b, ss material. , astm e-747 wire type iqi or penetrameter 1c, ss material. , astm e-747 wire type iqi or penetrameter 1d, ss material. , astm hole type pentameter as per astm-e1025 with calibration certificate, material carbon alloy and stainless steel. no. 5,7,10,12,15,17,20,25,30,35,40,45,50, 5 numbers each. , set of lead number 0 to 9 for industrial radiography testing, size 5mm to 6mm. , set of lead number 0 to 9 for industrial radiography testing, size approx. 10mm. , set of lead letter a to z for industrial radiography testing, size 5mm to 6mm. , set of lead letter a to z for industrial radiography testing, size approx. 10mm. , developer powder make to 13.5 ltrs., industrial radiography film processing chemical. , fixer with hardener powder make to 13.5 ltrs., industrial radiography film processing chemical. , wetting agent for industrial radiography film processing, wash purpose, make to 200 ltrs. , industrial yellow chalk. , industrial x-ray film, typendt-2. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , astm hole type pentameter as per astm-e1025 with calibration certificate, material aluminum. no. 5,7,10,12,15,17,20,25,30,35, 40,45,50, 5 numbers each.