Latest rail clamp Tenders | Government rail clamp Tenders

State Government

CTN :43725176

30 Mar, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of supply of coal feeder spares at gtps d d -head pulley bushing , half coupling for feeder head pulley, moc- carbon steel , seal cover plate for bearing housing of drive roller for 36 inch gravimatric feeder at gtps , bearing cap-housing for head-drive pulley for gravimetric feeder , block for belt take-up pulley, moc-carbon steel , screw for belt take-up pulley, moc-ss 410 , feeder take up mounting ring for 36 inch gravimatric feeder at gtps , feeder take uplocking ring for 36 inch gravimatric feeder at gtps , bearing housing of idle roller for 36 inch gravimatric feeder at gtps , bearing housing with cap for weigh span roller for 36 inch gravimatric feeder at gtps , bearing housing for instrument roller for 36 inch gravimatric feeder at gtps , shear pin torsion cup for clean out conveyer of 36 inch gravimetric feeder. , shear pin dia 8 x 25mm long for coc drive of coal feeder , feeder fire quenching nozzle with connector for 36 inch gravimatric feeder at gtps , end door clamping bolt assembly of coal feeder of unit -3,4 and 5 gtps , guide for sproket of feeder gate for 36 inch gravimetric feeder , pin rack plate for bunker outlet and feeder inlet gate for unit unit no. 3 and unit no. 4 of sikka tps. , set of gear and pinion assembly for gc feeder inlet gate, material - en 19 and key material - ms as per drawing no. stps- bmd-cm-32.

Central Government/Public Sector

CTN :44423869

23 Mar, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of casting - scrapper bracket (hy-251.06) - un m/cd carbon steel casting as per drg. 16117000402/02 with matl as per specn. aa19511/09 , rough m/cd bowl extn.ring seg. (hy-254.m) - as per drg. hy-254.00m rev-01 with matl. as per specn. aa19511/09 , rough m/cd bull ring clamping ring (hy-263.c) as per drg. no. hy-263.c rev 01 with matl as per specn. aa19511/09 , rough machined casting of spring housing cover (hy-854.06) as per drg. hy-854.06.c/00 with matl. as per specn. aa19511/09 , journal spring housing (hy-748.01) - rough m/cd casting as per drg. 16137000514/00 var01 with matl. as per specn. aa19511/09 , rough m/cd bowl hub cover (hy-275.00) as per drg 26118001119-c/00 with material as per spec aa19511/09

Central Government/Public Sector

CTN :44439491

01 Apr, 2026 NA

Ajmer - Rajasthan

Tender For supply of set consisting of 3 items. - 1) lug bracket as per drg no aak11057 qty - 01 number. 2) bracket for wire rope as per drg no lw36353 qty - 02 numbers - 3) qrv clamping guide plate as per drg no lw36352 - 01 number. - all the material and specifications to be confirmed as per respective drg's & specifications.

Central Government/Public Sector

CTN :44397925

17 Mar, 2026 NA

Delhi - Delhi

Tender For auction sale of others - pl no 98050126 u/s scrap miscellaneous ferrous items of loco spare & other ferrous items/parts consisting of nuts, bolts, special repair frame, bur frame, electronics rake frame of special repair, bur, vcu, brake rigging items, slack adjuster top, all type hanger levers, equalizing plate, cross lever, hanger plate, brake shoe, hanger lever pin, axle box cover inner race, clamping plate, axle guide, torque arm, sphere block, tie bar, released material of tbu/pbu, dampers, spring deflector, holding ring, inspection cover, impeller, end shield cover, compressor spares, servo motor, tm spare items, horn stay plate, rope sealing, bogie parts, cut pieces of sariya etc. with attachment if any.qty. 60mt. note:- non ferrous and rail will not be delivered. for stock holder sse/s/tkd. ss-11 no-sse/s/tkd/35/25-26/28 date 09.02.2026. ds-8 no. 015056 dt. 09.02.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. note:-cutting may be allowed for easy loading at the time of delivery. material are lying in delhi (tkd) state.

Central Government And Public Sector

CTN :44399995

06 Apr, 2026 NA

Bongaigaon - Assam

Tender For supply of high performance rail clamp (hprc) of codiun with drawing no: codiun clamp mk8.

CTN :42579207

02 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en

CTN :44400471

16 Mar, 2026 NA

Katihar - Bihar

Tender For supply of alloy steel point locking rail clamps standards conformity to indian standard is: 9181-1988 bis marked no cml number if bis marked, in case no bis available please put na performance parameters type of c-clamps medium duty material of body of c-clamps carbon steels material of handle, screw and pressure pad of c-clamps steel nominal size of maximum opening of c clamps (mm) 200 nominal size of maximum closing of c clamps (mm) full closing hardness of body, screw pressure pad and handle of c clamps for light duty 150 to 220 (in hv) iso certificate of manufacturer iso 9001-2015....etc

State Government

CTN :44342707

23 Mar, 2026 84.37 Lacs

Umaria - Madhya Pradesh

Tender For supply, dismantling, erection, testing and commissioning of hydraulic rail clamp assembly for thyssenkrupp make stacker cum reclaimer of conveyor 8a installed at 4x 210 mw chp at sgtps, mppgcl, birsinghpur

Central Government / Public Sector

CTN :44181319

17 Mar, 2026 NA

Mumbai - Maharashtra

Tender For supply of rail jumper with clamps at both ends 05 mts long complete as per rdso drg. no.re/33/p-500. ( rail clamp made of al.bronze is: 3091/1999 and pvc copper cable size: 248/0.45mm ) make:- pec, sdu, sst, im or equivalent.

Central Government/Public Sector

CTN :44169445

25 Mar, 2026 NA

Jodhpur - Rajasthan

Tender For supply of elite iii rail clamp w 2 cam joints 18in,34in bilat crossbar hng 11.5x8.5x11.5in,24in angled arm 8x16in,18in angled arm 8x10in,20in lower abd bar 14x6in,onefram tm,lite wand with 3 adapters,cam ii qa handle 8in,dual angle handle 8in,micro adj ii clip on qa 7.75in,micro adj ii clip on qa 10in,t handle,balfour small lip 66x73mm,balfour small lip 78x73mm,balfour 83x57mm,non slip balfour r 77x94mm,non slip balfour l 77x94mm,fence 102x127mm,kelly 64x76mm,kelly 76x89mm,richardson 51x127mm,richardson 51x178mm,malleable 25x104mm,malleable 51 x 203mm,malleable finger 6in,st marks w lip 64x178mm,harrington 64x152mm,deaver 51x127mm,y blade,instrument case

Rail Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors