Latest rail clips Tenders | Government rail clips Tenders

Central Government / Public Sector

CTN :45182969

03 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply, fitment, commissioning & testing of powered wheel axle (phooltas) drg. no. ohe4-01 00/02, rev.02) fitted with axle drive gear box assembly (phooltas drg. no. ohe4-01-03/00, rev-02) suitable for phooltas mark iv tower car cost of manufacture, supply transportation to site and installation on the tower wagon of the following item. wheel axle assembly complete with two numbers 915mm rolled steel wheel fully finish machined and assembled on axle, two numbers axle box assembly with axle box bearing and necessary covers assembled on the axle along with one number two stage reduction gearbox (bevel helical) and all bearings, shaft, input flange, oil seals and gear box housing fully finish machined. the housing is also provided with torque arm bracket and required spherical bushing with retainer excluding torque arm and initial fill of oil. make: phooltas or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45014113

28 May, 2026 30.00 Lacs

Birsinghpur - Madhya Pradesh

Tender For supply of jalpraday samagri for f.y. 2026-27 -solvent, g.i. pipe 1" (class b, medium), g.i. flange 2" (packed), g.i. pipe 2" (class b, medium - swastik), g.i. pipe 3" (class b, medium - swastik), g.i. pipe 4" (class b, medium - swastik), c.i.d. joiner 2" (complete), g.i. socket 1", c.i.d. joiner 4", g.i. socket 2" (long), rubber ring 2" (thick), g.i. socket 3" (long), g.i. socket 4" (long), g.i. socket 6" (long), thread, g.i. elbow 1", pvc joiner 75mm, g.i. elbow 2", g.i. elbow 3", g.i. elbow 4", g.i. elbow 6", pvc joiner 90mm, g.i. bend 1", g.i. nipple 2"x24", g.i. bend 2", g.i. bend 3", g.i. bend 4", g.i. bend 6", submersible motor pump 7.5 hp (texmo/cri), g.i. union 1", pipe cap (sizes 2", 3", 4", 6"), g.i. union 2", g.i. union 3", g.i. union 4", g.i. union 6", connection clamp 2" (strip), connection clamp 2" (strip - size 1), pliers (taparia), connection clamp 2" (strip - size 2), connection clamp 2" (strip - size 3), connection clamp 2" (strip - size 4), tester (taparia), pipe clamp 2" (tata, length 18"), l.t.l. relay 13, 21a; ci reducer 2"x3"; ci reducer 2"x4"; ci reducer 3"x4"; ci reducer 4"x6"; gi bushing 1"x2"; gi bushing 1"x1"; gi bushing 2"x1"; gi bushing 1"x2"; ltl auto switch; ltl coil (440 volts); gi bushing 2"x3"; gi bushing 2"x4"; gi bushing 4"x6"; ltl coil (250 volts); gi brass gate valve 1"; gi brass gate valve 1"; ltl coil (150 volts); gi brass gate valve 2"; ltl starter kit; ltl base; gi brass gate valve 3"; gi brass gate valve 4"; ltl comb; gi tee 1"; gi tee 1"; gi tee 2"; gi tee 3"; ltl push button; ltl. connection plate (3-pin, 5-pin, 6-pin); round ammeter; voltmeter; sluice valve (complete with brass spindle) — sizes: 2", 3", 4", 6"; cast iron (c.i.) tail piece — sizes: 3", 4", 6"; flange (with collar) — sizes: 2", 3", 4", 6"; square voltmeter; nut & bolt (full thread) — sizes: 5/16" x 2", 4/16" x 2", 4/16" x 3", 4/16" x 6", 3/16" x 2"; cast iron (c.i.) detachable joint (complete) — sizes: 3", 4"; rubber ring — sizes: 2", 4" (thick), 6" (thick); square ammeter; g.i. nipple. 1" long g.i. nipple; 2" x 12" long g.i. nipple; 2" x 9" long g.i. nipple; 2" x 6" long g.i. nipple; 2" x 4" long g.i. nipple; 3" x 12" long g.i. nipple; 3" x 9" long g.i. nipple; 3" x 6" long g.i. nipple; 3" x 4" long g.i. nipple; 4" long g.i. nipple; 6" long g.i. nipple; 1 ft g.i. nipple; ammeter-voltmeter panel; high-quality pipe wrench (taparia) 12"; high-quality pipe wrench (taparia) 14"; high-quality pipe wrench (taparia) 18"; high-quality pipe wrench (taparia) 24"; high-quality pipe wrench (taparia) 36"; high-quality chain wrench (taparia) 36"; high-quality chain wrench (taparia) 45"; chain wrench strap (taparia) 36"; chain wrench strap (taparia) 45"; t-wrench (taparia); strap wrench (all sizes); gland packing cord; non-return valve (jindal) 2"; non-return valve (jindal) 3"; non-return valve (jindal) 4"; non-return valve (jindal) 6"; air valve (jindal) 2"; hdpe joint 2"; hdpe joint 3"; hdpe. 4" joint, 1/2" iron tap, 1/3" brass tap, 1" steel tap, hacksaw blade, 63 amp large-size copper-point grip (kent), 32 amp large-size copper-point grip (kent), pvc tape, raw rubber, 6 mm branded copper cable (kent co.), 4 mm branded copper cable (kent co.), 2.5 mm branded copper cable (kent co.), 8 hp 8-stage submersible pump, 2 hp 12-stage submersible pump, 2 hp 20-stage submersible pump, 3 hp 25-stage submersible pump, 5 hp 8-stage starter/panel board, 2 hp 12-stage starter/panel board, 1 hp 12-stage starter/panel board, 7/16 branded pvc wire, whitewash, 10 mm nylon rope, pvc. water tanks (4-layer): 5000 liters, 3000 liters, 2000 liters, 1000 liters; tank fitting sets (1" and 3/4"); super hdpe pipe (2"); super hdpe pipe (3"); grease; iron chisel (1 ft long); iron chisel (6" long); iron hammer (500g); iron hammer (250g); air valve (4"); multimeter; taparia digital tester; taparia digital lamp; submersible motor pump (3 hp, texmo cr); super hdpe pipe (4"); rubber packing; saw blade (hacksaw blade).

Central Government/Public Sector

CTN :45184071

11 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of grease no.'o' graphited for elastic rail clips ( spec. no is 408-1981/ reaffirmed 2004.with rdso additional requirement as slip no.1 issued by rdso on august 2016) as per specn. spec. no is 408-1981/ reaffirmed 2004.with rdso additional requirement as slip no.1 issued by rdso on august 2016)[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45184197

16 Jun, 2026 NA

Multi City - Multi State

Tender For running contract for manufacture and supply of 6400 mm curved switches as per rdso dr. no. t-9775 (alt-3 with latest alteration) with 60e1 rail profile of r-260 grade stock rails and 60e1a1 railprofile r-260 grade thick web tongue rail with elastic fasteners, spring operated setting device (rt-6216 with latest alteration) and anti creep device rt-9777 & rt-9778 (with latest alteration), complete withall fitting for 1in8.5 turnout b.g. (1673 mm) for 60kg on psc sleeper i.e. all fittings for switch portion as per sub assembly no. t-9775 (with latest alteration) in accordance with rdso's standard drawing no. t-9774 (with latest alteration) excluding elastic rail clips, metal liner and insulating liners. irs specification: t-10-2025 & t -62 - 2025 (the alt. in drawing and specication issued by rdso up to 10 days prior to tender closing date shall be applicable to this tender.). note:- (i)the rate includes cost of stock rails, tonguerails and check rails. (ii) list of fittings is attached as annexure-b. (iii) the cost of required pre curvature,if any, is included in the rates, no additional payment shall be made on this account. (iv) the bifurcation of rh and lh quantity will be advised on coverage purchase order. [ warranty period: 30 months after the date of delivery ] ]

CTN :45050398

12 Jun, 2026 NA

Multi City - Multi State

Tender For manufacturing and supply of metal liners for use with elastic rail clips flat toe on concrete sleepers for 60 kg. [uic ]

CTN :45138287

19 May, 2026 NA

Kamrup - Assam

Tender For supply of ring retaining , bracket , latch snap slide fastener , eye bolt spaded box , clamp , ring , bracket angle securing master cylinder , bushing sleeve , bearing tapered roller 57 15 97 63 24 608 , nut metric wing steel phosphated m10 , washer leather set , universal joint , cover handle grip handle , bearing needle roller 22 1 35 22 mm , pin stud shoulder and stepped , wheel cylinder lh and rh , hp hose front , gasket hose , pipe assembly 3 way , master cylinder assembly , pipe assy 3 way to front lh hose , push rod

CTN :44951410

23 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : annual rate contract for two years for spares of flowmore - brg inter bowl,7,bronze,yp119de+ , protecting ring,11,ms,yp119de+ , protecting ring,11,ms,yp119de+ , discharge case brg.,17,bronze,yp119de+ , line shaft sleeve,24,ss,yp119de+ , line shaft bearing,25,thordon,yp119de+ , top shaft sleeve,32,ss,yp119de+ , packing box bush,33,bronze,yp119de+ , wearing ring for bowl,60,bronze,yp119de+ , thrust bearing,steel,yp119de , radial ball bearing,steel,yp119de+ , shaft pump f5822-550x450 pcwp101abcdef , seal oil brg inner pcwp101abcdef , collar shaft f5822-550 pcwp101abcdef , seal oil brg outer pcwp101abcdef , bushing stuffingbox f5822 pcwp101abcdef , grub screw impllr f5822 pcwp101abcdef , ring seal set flowserve pcwp101 , impeller 25 flowmore mucp101 , mech seal asy 29 f5822-550 pcwp101abcdef , slv shaft f5822-550 pcwp101abcdef pdpp , nut slv de f5822-550 pcwp101abcdef pdpp , lock washer brg f5822550 pcwp101abcdef , nut sleeve nde f5822550 pcwp101abcdef , strainer,3,ss,iurpa109abc+ , suction bell bearing,4,brz,iurpa109abc+ , sand collar,6,ms,iurpa109abc+ , protecting ring,11,ms,iurpa109abc+ , thrust collar half,12,ss,iurpa109abc+ , impeller key,13,ss,iurpa109abc+ , mpeller,14,bronze,iurpa109abc+ , bowl bush,15,rubber,iurpa109abc+ , bearing inter bowl,16,bronze,iurpa109abc , wear ring,18,bronze,iurpa109abc+ , wear ring,19,bronze,iurpa109abc+ , discharge case,21,bronze,iurpa109abc+ , pump shaft,23,ss,iurpa109abc+ , line shaft sleeve,27,ss,iurpa109abc+ , shaft bearing,28,thordon,iurpa109abc+ , bearing retainer 29 cs iurpa109abc+ , cover plate,30,ci,iurpa109abc+ , shaft coupling cap,32,ss,iurpa109abc+ , shaft coupling body,34,ss,iurpa109abc+ , key,35,ss,iurpa109abc+ , thrust collar half,36,ss,iurpa109abc+ , line shaft,42,ss,iurpa109abc+ , adjusting nut,55,ss,iurpa109abc+ , top shaft,56,ss,iurpa109abc+ , water seal ring,61,bronze,iurpa109abc+ etc...

CTN :45099180

27 May, 2026 NA

Dehradun - Uttarakhand

Tender For supply of bevel gear aa sght pzu7 lf 7420111097 , bevel gear aa sght pzu7 lf 7420111099 , s point gear tvne1pa pd tvne4b pd m1 lf 7425485580 , bushing tvne1pa pd driver night sight for bmpii lf 7432511016 , holder tvne1pa pd tvne4b pd m1 lf 7432511036 , ring nut tvne4b pd m1 tvne1pa pd 7432512006 , ring nut tvne4b pd m1 tvne1pa pd 7432512007 , cover 1a43visor 7440200877 , axle 1a43head 7440201750 , block aiming assy for cti t90 pnk4s 7440207593 , journal ctit90 7440209532 , screw driver blade tpdk1 9001080392 , steel balll size dia 3point969mm tpdk1 9927096612

corporations/Associations/Others

CTN :45024558

15 May, 2026 NA

Puruliya - West Bengal

Tender For corrigendum : supply of dry system d d - valve seat - rotary segregating valve , gate - rotary segregating valve , spring adjusting screw - rotary segregating valve , crank arm - rotary segregating valve , rotary segregating valve complete assembly , spool piece - rotary segregating valve , gate bushing - rotary segregating valve , gate arm - rotary segregating valve , bush gun metal - rotary segregating valve , spring - rotary segregating valve , bushing assy with housing - rotary segregating valve , celvis - rotary segregating valve , lower chamber - rotary segregating valve , spacer - 3 inch equalizing valve , side port adaptor - 3 inch equalizing valve , top port adaptor - 3 inch equalizing valve , adaptor - 3 inch equalizing valve , bottom adopter - 3 inch equalizing valve , 3 inch equalizing valve complete assembly , cage for filter bag - buffer hopper , slide gate - 250 nb segregating valve , spring steel - air intake check valve , air intake check valve assembly , disc tee type - air intake check valve , valve outlet - material handling valve , valve seat - material handling valve , end cover - material handling valve , slide gate housing - material handling valve , valve seat - 3 inch equalizing valve , valve disc - 3 inch equalizing valve , sleeve - 3 inch equalizing valve , valve body with seat - 200 nb segregating valve , seat - 200 nb segregating valve , valve body with seat - 250 nb segregating valve , seat - 250 nb segregating valve , spring holder flap - air inlet check valve , check nut tension adjuster - air inlet check valve , flanged body - material handling valve , plug valve - material handling valve

Central Government/Public Sector

CTN :45121051

03 Jun, 2026 NA

Nagpur - Maharashtra

Tender For goods, manufacture and supply of metal liner to rdso drg. no. t-8749 to t-8750 to alt-1 , for use with psc sleeper to rdso drg. no t-8746 suitable to 52kg rails. irs specification - for metal liner for use with elastic rail clips sr. no. t-56-2025. latest alterations shall be applicable. bidder must attach annexure j as per ce/tp l.no.cr-hqoengg(tend)/12/2022 dt. 24/04/2023 attached with the nit. [ warranty period: 30 months after the date of delivery ]

Rail Clips Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector