Latest rail gauge Tenders | Government rail gauge Tenders

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

Central Government And Public Sector

CTN :45076846

28 May, 2026 NA

Katihar - Bihar

Tender For at katihar division - supply, installation and commission of track-based rail gauge face lubricators (electronic type) for 01km category along with supply of grease and maintenance for a period of 5 years for curves.

Central Government/Public Sector

CTN :45049485

18 May, 2026 NA

Solapur - Maharashtra

Tender For manufacture and supply of inspection gauges as per rdso drg no.t-4989 (part) for 1 in 8.5 cms crossing b.g. for 60 kg .to drg. no. rdso/t- 4967 for use in depot. one set consists of : (a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flange way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depression gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i)wing rail gauge(at nose) gauge no.14. (duly packed in well cushioned double decker system for easy handling) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45038384

18 May, 2026 NA

Solapur - Maharashtra

Tender For manufacture and supply of complete set of inspection gauges as per rdso drg no.t-4782 (part) for 1 in 12 cms crossing b.g. for 60 kg. to drg. no. rdso/t- 4220 for use in depot. one set consists of :(a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2,(c) flange way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depression gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i) wing rail gauge(at nose) gauge no.14. (duly packed in well cushioned double decker system for easy handling) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45008365

18 May, 2026 NA

Multi City - Multi State

Tender For supply installation and commissioning of track based rail gauge face lubricator (electronic type)-105 nos in construction projects of wcr.

Central Government/Public Sector

CTN :44969278

13 May, 2026 NA

Bikaner - Rajasthan

Tender For supply of inspection gauges as per rdso drg no.t-4782 alt-3 (part) for 1 in 12 cms crossing b.g. for 60 kg. to drg. no. rdso/t- 4220 for use in depot. one set consists of : (a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flange way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depression gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i) wing rail gauge(at nose) gauge no.14. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44958318

12 May, 2026 NA

Bikaner - Rajasthan

Tender For supply of inspection gauges as per rdso drg no.t-4989 (part) for 1 in 8.5 cms crossing b.g. for 60 kg .to drg. no. rdso/t- 4967 for use in depot. one set consists of : (a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flange way clearance (at throat) gauge no. 3,(d) flange way clearance (41mm) gauge no.4, (e) nose depression gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i) wing rail gauge(at nose) gauge no.14. [ warranty period: 30 months after the date of delivery ]

CTN :44958721

13 May, 2026 NA

Multi City - Multi State

Tender For supply of manual rail gauge face lubricator machine as per technical specification enclosed. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912183

04 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of manual rail gauge face lubricator machine specification: machine consists of 1)hand grease gun ( 6 kg capacity). 2) teflon wheel with axle bearing. 3)crank wheel big & small (1 each)with 1/2 chain . 4) grease application brush . 5) square pipe with handle . 6) weight of the machine ( 15-20 kg) . 7) one noof stand. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44912029

07 May, 2026 NA

Ajmer - Rajasthan

Tender For manufacture and supply of inspection gauges as per rdso drg no.t-4989 (part) for 1 in 8.5 cms crossing b.g. for 60 kg .to drg. no. rdso/t- 4967 for use in depot. one set consists of : (a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flange way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depression gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i)wing rail gauge(at nose) gauge no.14. [ warranty period: 30 months after the date of delivery ]

Rail Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors