Latest railway sapres Tenders | Government railway sapres Tenders

Central Government/Public Sector

CTN :40957888

10 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of transportation of imported railway consignments - "22 skids/cases of spares parts of rail grinding machine rgm-9 6 stone including unloa ding at ultimate consignee by transporter (packing slip attached) - package dimension: 22 cases dimension of each case/skid: 22 cases: 36 x 36 x 4 2" (826.90 kgs each case x 22 cases = 18191.80 kgs)total weight : 18.19 1 mt from nhava sheva/mumbai to dyce/track machine care centre, (opp highwa y health unit), south western railway, yeshwanthpur, bangalore - 560022. contact no. 9731665225/9731665238, e-mail: dycetmypr@gmail.com ]

State Government

CTN :40963042

25 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply and installation of rail cum road vehicle spares d d - air dryer , wheel brake cylinder , valve parking brake , valve abs brake rear axle , brake valve , valve for circuit protection , solenoid valve , brake pressure regulator , pressure limiting valve , relais valve , pressure sensor

Central Government/Public Sector

CTN :40945583

07 Jul, 2025 NA

Mancheshwar - Odisha

Tender For supply of transportation of imported railway consignments, 22 skids/cases of spares of (rgm-96) rail grinding machine stone, package (packing slip att ached) including unloading at ultimate consignee by transporter, dimension: dimension of each skids/cases: 22 skids/cases: 36 x 36 x 42" @ 826.90 kgs ea ch, wt: 0.826 mt each, total weight: 18.19 mts. from nhava sheva/mumbai to assistant executive engineer - track machine satellite depot, opposite to am battur railway station, southern railway, chennai - 600053.contact person: - assistant executive engineer - 8400962440 ]

Central Government/Public Sector

CTN :40729057

07 Jul, 2025 NA

Sundergarh - Odisha

Tender For corrigendum : tender for supply of spares for slab transfer car of plate mill e e - single pole, hanger assly rs, 8.00.1349, bus bar, joint, aluminium.dw, n:rs8.00.1349, anchor clamp, w/fixng strip,rs, 8.00.1349, alluminium, rail, dwn:rs, 8.00.1349, end cap f/200a, aluminium bus bar, system, bus bar joint, casing,dwn:rs, 8.00.1349

Corporations And Associations And Others

CTN :40938717

04 Aug, 2025 NA

Hisar - Haryana

Tender For supply of electrical spares - electrical spares, digital synchronous timer for switching on/off operation, cycle duration -24 hours, maximum number of switchings 48 on-48 off, contact voltage/current rating- 240vac/16a, changeover contacts- 02 nos. din rail mounting type, minimum time interval 15 min for 24 hrs. make selec, l& t, c&s, abb, havells, legrand only, power contactor 80a, coil voltage-240vac, 1 no-1nc, din mounted , abb, schneider/havells/ lnt/ hager/c&s/legrand/bch only, mcb 16a, single pole, c curve, breaking capacity-10ka, make : abb, schneider/havells/ lnt/ hager/c&s/legrand/bch only, fuse hf type, 32 a, 415 v, fuse hf type, 63 a,415 v, magnetic oil level gauge (mog) for 12.5 mva rating oil type transformer.size 150mm , suitable for vertical mounting., timer on delay a1d1-x eapl ,3 sec-30min , din rail mounting type, pendent 6 waymaterial: high grade plasticvoltage rating:415 vaccurrent rating:5ampwith emergency stop & start/alarm, with ip65 dust proof for outdoor application, control transformer415/110vac, 500va , winding material - copper , maximum size in mm w x d x h = 160 x 100 x 200 , control transformer415/110vac, 300va , winding material - copper maximum size in mm w x d x h = 160 x 150 x 160, control transformer415/110vac, 1000va , winding material - copper maximum size in mm w x d x h = 150 x 150 x 180, control transformer415/110vac, 3000va , winding material - copper maximum size in mm w x d x h = 200 x 160 x 300, bridge rectifier input voltage 415 vac output voltage 190 vdc, fuse ctis, bolted type, 63 amp , 415 vac, fuse hbc, bolted type, 32 amp , 415 vac, hrc fuse base for 100a hn type fuse , 415 volt, limit switch with 1no + 1 nc , 415 volt , 50 hz , 1.5 amp .these limit switches should be equivalent to original installed model: bc9 t limit switch (jlsla) of jaibalaji make

State Government

CTN :40931325

18 Jul, 2025 NA

Multi City - Telangana

Tender For tggenco-ktps vii stage/paloncha - supply of bosch make fire fighting spares - fnm-420-a-bs, loop sounder,make:bosch, flm-420-i2-w/e,2 input module,make:bosch, flm-420-rlv1-e,relay module,make:bosch, fnm-420-a-lsn, strobe,make:bosch, battery controller module,bcm 0000b, make:bosch, lsn0300a loop module,make:bosch, prd 0004 a-panel rail long,material:plastic,, operating temperature:-5 to 50 deg.c,, output voltage:5-24 vdc,, storage temeprature:-20 to 60 deg.c make:bosch, prs-0002-c-panel rail short,output voltage 5-, 24vdc,operating temperature:-5 to 50 deg.c,, storage temperature:-20 to 60 deg.c make:bosch

Central Government And Public Sector

CTN :40913005

30 Jul, 2025 NA

Multi City - Multi State

Tender For supply of high frequency straight grinder with inbuilt gearbox and its spares f or grinding of rail wheel with the following technical parameters. 1.voltage-200v, 2.frequ ency-300hz, 3.current-12a, 4.power consumption-2900w, 5. power output-2400w, 6.rpm-5500 t o 6000, 7.weight 9kg(max), 8.mounting flang- mounting facility for grinding wheels with bor e dia 20mm x 150 mm outer dia x 25 mm thickness, 9. warranty- as per irs condition,10.power s upply wired, 11. wire length 5 meter, 12. accessories- 05 numbers of protective guard, 01 nu mber of mounting flange to mount grinding wheel, 01 number of balancer with the capacity to hang the machine vertically, 01 number of spanner set to tight mounting flange. make-h aller or equivalent material test certificate , warranty and guaranty certificate for high frequency straight grinder and accessories shall accompany with the supply. material acc eptance will be subject to consignee inspection. [ warranty period: 12 months after the date of d elivery ]

CTN :40899518

21 Jul, 2025 98.71 Lacs

Kota - Rajasthan

Tender For tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

Central Government/Public Sector

CTN :40905434

04 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of transportation of imported railway consignments - "22 skids/cases of spares parts of rail grinding machine rgm-9 6 stone including unloa ding at ultimate consignee by transporter (packing slip attached) - package dimension: 22 cases dimension of each case/skid: 22 cases: 36 x 36 x 4 2" (826.90 kgs each case x 22 cases = 18191.80 kgs)total weight : 18.19 1 mt from nhava sheva/mumbai to dyce/track machine care centre, (opp highwa y health unit), south western railway, yeshwanthpur, bangalore - 560022. contact no. 9731665225/9731665238, e-mail: dycetmypr@gmail.com ]

Central Government/Public Sector

CTN :40807389

04 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : comprehensive maintenance contract of 4 nos 140mt inwb rail in motion weighbridge inclusive of all spares at nstps

Railway Sapres Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors