Latest rain gauge Tenders | Government rain gauge Tenders

Central Government/Public Sector

CTN :41128796

08 Aug, 2025 12.00 Lacs

Gurgaon - Haryana

Tender For corrigendum : providing of hiring of consultants - milestone/deliverable based - establishment of rain gauge station, automatic weather station and current meter at kumbhe pumped storage project, maharashtra; establishment of rain gauge station, automatic weather station and c..

CTN :41290270

19 Aug, 2025 NA

Muzaffarpur - Bihar

Tender For supply of ac voltmeter , ac voltmeter 0-150 , ac ammeter , function generator , single phase variac , dc voltmeter 0-15 , dc voltmeter 0-150 , dc ammeter , earth resistance tester , d. c. regulated power supply , tachometer , rheostat , electrical tools bag , electronic work bench , build a voltage divider bias circuit and measure the terminal currents & terminal voltages of the vo , build the ce, cc and cb amplifier circuit and verify the input and output characteristics. and build , dso(100mhz) , v-i characteristics of scr , measurement of current and voltage in a branch of the given electrical circuit using kirchhoff s cur , measurement of load current in load resistance using thevenin s theorem, norton s theorem, maximum p , measurement of open circuit(z) parameter, short circuit(y) and abcd parameter of a two-port network. , characteristics of triac, . , r and rc triggering circuit of scr. , breadboard , b. h curve apparatus kit , demonstration of faraday s laws of electromagnetism. , test the performance of zener diode/pn/led , test the functionality of half wave rectifier and full wave rectifier and bridge , implement logic gates using universal nand gate ic, nor gates and universal gates , half adder and full adder using gates , sr, ms-jk, d and t flip using ic 7476(all in one) , test the functionality of dac and adc using ic. , passive components , r and rc ujt triggering circuit of scr , half wave and full wave converter with r and rl load and freewheeling diode , characteristies of igbt, mosfet, fet , chopper circuit , inverter circuit(series and parallel) , forced commutation circuit (a, b, c, d and e) , single phase step-up and down cyclo converetr , scr single and three phase half-full controlled bridge converter , dc to dc converter trainer (buck, boost and buck-boost converters) , scr single phase dual converter trainer , discrete component trainer , total station , gps instrument , tilting level , two hinged arch , water absorbtion test apparats for aggregate larger than 10mm or between 40mm and 10mm , vessel for water absorbtion test of aggregate smaller than 10mm , miscellaneous tools , cylindrical steel cup, metal hammer , bourdon's gauge , piezometer , flywheel apparatus , laboratory permiability apparatus(constant head and falling head) , calibrating glass tube , steel cylinder, cylindrical metal , jar testing apparatus with jars , burrete, burette stand, conical flask, pippette , bod apparatus , suspended solids, dissolved solids, and total solids measuring apparatus , bod incubator , digital balance, hot air oven , test tubes , beaker , digital thermometer , u tube manometer , dial gauge stand , silver sulphate , dpd (diphenyle paraphenylene diamine indicator , shear strength testing machine , digtal chlorimeter , watt meter

State Government

CTN :41249594

07 Aug, 2025 NA

Multi City - Telangana

Tender For tggenco-ytps (5x800mw)-supply of certain materials for the maintenance of railway siding track of yadadri thermal power station.-, rail cutting machine having petrol engine, 6.5 hp, 3800 rpm, 50 hz with cutting wheel of dia 350 mm, , rail hole drilling machine having petrol engine, automatic, 5 hp, 3800 rpm, 440 v, 50 hz, 2 shaft, , angle grinding machine having 230 v, 50 hz, 1200 rpm, 600 w, 2 way, gws 600 bosch with grinding wheels, , brush cutter machine having petrol engine, 4 stroke neptune, 1 hp, bc-99, gx-35 of honda or equivalent, , welding machine having 3 phase, 400 amp, 415 v, 50-60 hz with copper lug connector, 16 sqmm copper & 25 sqmm earthing cable, 1 holder, 1 leather hand gloves, 1 auto darkening welding helmet, , mild steel mechanical track lifting jack of 15 ton capacity having base area 155 mm x 300 mm, lifting stroke @ 280 mm, 25 kg weight, , spiking hammer of 4.50 kg capacity with long handle suitable for fixing rail clips, , mild steel sleeper tangs for shifting concrete sleeper one place to other place, , mild steel rail tangs for shifting rails one place to other place, , mild steel crow bars of dia 32 mm & 1680 mm long for packing ballast around the sleeper, , mild steel ballast fork with handle for digging ballast, , carbon steel pickaxe of 20 inch long, , iron shovel/spades with long handle, , motor pans of 18 inch dia & made with plastic, , mild steel jim crow for straightening rail, , aluminum level cum gauge with glass level, spirit level, , 100 cm long straight edge, , canne-a-boule, , rail thermometer, , mild steel panja (railway track ballast spreading), , ruler, scale, steel, 30 cm, , chain pulley, spur gear, monorail, 3t, 6 m, , double ended spanners (ribbed) 36 x 41, , nylon rope, diameter: 1/2 inch of 100 m length

State Government

CTN :41256813

05 Aug, 2025 NA

Thane - Maharashtra

Tender For providing services for data collection at river gauging stations (stage water level), automatic rain gauge stations & standard rain gauge stations under kolad sub division from dated .01/06/2025 to 31/10/2025.

CTN :41256073

21 Aug, 2025 NA

Mohali - Punjab

Tender For supply & installation of lab equipment for aicte-idea lab at chandigarh engineering college-cgc, landran, mohali-, laser cutter, 2, vinyl cutter, 1, 3, 3d printer, 1, 3d scanner, 1, 4, cnc router, 1, mini desktop lathe cum milling, 1, drilling m/c 1 hp motor, , handheld high speed drilling m/c-15000 rpm with accessories - 2 nos., benchtop grinder machine, solder stations (5 nos.), desoldering m/c, advanced, motorized sewing machine, wood lathe, power tools, portable welding m/c, refrigerator, normal and microwave oven, magnifying glass with stand-2 nos., digital microscope, , digital storage oscilloscope, 1, signal generator, 1, variable power supply, 1, benchtop multimeter, 1, projector, 1, heavy duty laser printer, 1, pcb milling machine", 1, pcb prototype machine, computer workstation in networking- 5 nos., quardcopter assembly kit, 1, 5, 1, smart board, 1, relay module, electric bicycle motor & access, granite surface plate, vacuum cleaner, hot air gun-5 nos., measuring equipment [vernier calliper (0-200/0.01),, vernier height gauge (0-1000mm), micrometer 0-50, 50-100/0.001 inside and outside)], metal scale etc., fire extinguisher, first aid box, digital multimeter (5 units), clothes iron (5 units), electronic component repository (lcr meter, variac etc.), 3d printer filament (depending on the printer, 2 rolls), acrylic sheets (2mm,3mm, 4mm, 5mm all of area 8ft x 4ft) 2 sheets each, foam sheets (krum, 10mm, 12mm, 15mm all of area 8ft x 4 ) 2 sheets each, ply boards (8mm, 12 mm, 18mm, all of area 8ft x 4ft) 2 sheets cach, nylon rods, 12mm, 15mm, 18mm, 25mm all of length i m.5 cach, nuts, 3mm, 4mm, smm, 6mm, 8mm, 10mm, 12mm,100 cach, bolts, dia (3mm, 4mm. smm, 6mm, 8mm, 10mm, 12mm) length (1", 1.5", 2" 2.5"),100, cach, screws.3mm, 4mm, 5mm,100 cach, washers, 3mm, 4mm, smm, 6mm, 8mm, mm, 12mm, 100 cach, studs,6mm, 8mm, length 1m5 each, nails, 1", 2", 3", 100 each, adhesives, m-seal. feviquich, fevi bond, 10 cach, 2way tapes 20 rolls,, pvc pipes, 75°. 1". 1.5", 2.5" 3" length 10ft,1 each, aluminum channels, l, c, box, strip length 12ft.2 each, pcb drill bits,0.5mm, 0.8mm, 1mmm,20 cach, drill bits, jmn, 4mm, smm, 6mm,,20 each, drill bits, 8mm, 10mm, 12mun,5 each, carpentry boring bits, entire kit, 1 kit, electronic active and passive components, resist ors, capacitors, diodes and transistors, 10 each, usb cables for connecting arduino and other development boards.10, radium cutter knives 10, glue sticks.,50, hack saw blades,6" and, 9v battery snaps 20, lan cables, for connecting raspberry pi,5, 9v batteries, 20, hacksaw (5 nos.), micro chisel set (3 nos.), , pliers (3 sets), 3, manual pcb drilling machine (3 nos.), pcb power drilling machine (3 nos.), 3, 3, cordless drilling machines (2 nos.), 2, jigsaw machines (2 nos.), power circular saw (2 nos.), files set (2 sets), 2, file handles (1 set), 1, needle files (2 sets), standard workshop tool, pipe vice (2 pcs.) 2, mini hacksaw (5 nos.), , ball peen hammer (5 nos.), steel shafi claw hammer (5 nos.), nylon mallet (5 pes.), rubber mallet (5 pcs.), allen key set (3 sets), dremel malti tool kit (2 nos.), double ended spanner sets (2) sets), 12 piece open ended spanner set (2 sets), belt and disc sanding machine (1 nos.), scroll saw machine (1 no.), tool wall covering perforator (3 pes), dremel moto saw, bench grinding machine, power return measuring tape (5 nos.), tri square 8" (5 nos.), stamless steel rule (5 nos.), digital vernier caliper (5 nos.), spirit level (5 nos.), dremel cordless rotary tool, gpio power router, sewing machine, impact drill (3 units), ratchet set (2 units), router bit starter kit, scroll saw, hot air blower with soldering iron (5 nos.), tin cutter with spring (10 units), centrifugal blower, screwdriver sets (2 sets), cutting mats (5 nos.), vacuum cleaner (2 nos., hot air gun-5 nos., micrometer-5 nos., glue gun-5 nos., air compressor, allen set wrench (5 set), tongue and groove pliers (5 pcs.), non-contact voltage tester (5) pes.), wire stripper (5 p

CTN :41233104

07 Aug, 2025 NA

Cachar - Assam

Tender For supply of weight balance 1500 gm , weight balance 10 kg , weight balance 100 kg , dry bulk density test apparatus , los angeles abrasion test apparatus , liquid limit device with astm growing tool , vicat apparatus , needel for vicat , non destructive concrete test hammer , slump cone appratus alongwith tempering rod 16 mm and 600 mm length , specific gravity appatatus_water absorption test , cbr test apparatus , vee bee consitometer , bitumen penetrometer needle container stop watch , marshall stability test apparatus , compressive testing machine , electric oven ranging 0 to 220 degree centigrade , oven universal temp upto 200 degre celcius , hot air lab electric oven , digital soil moisture meter , pychnometer make_exvit , stop watch , dial gauge 25mm travel 0 point 01 mm_division , glass thermometer ranging 0 to 100 degree , metalic thermometer ranging 300 degree , sprit level , bitumen extractor electric operated , digital compass with stand , cube mould 150x150x150 mm , digital rodo meter , benzene , sodium sulphate , wax , distilled water , standared sand , filter paper dia 240 mm with thickness 0 point 71 mm and centre hole dia 25mm _ 100 nos per packet , filter paper dia 240 mm with thickness 0 point 71 mm _100 nos per packet , filter paper dia 150 mm with thickness 0 point 71mm _100 nos per packet , filter paper dia 100 mm with thickness 0 point 71mm _100 nos per packet , elongation and flakiness test appratus _complete set , sieve size 37 point 5 mm 450 mm dia , sieve size 20 mm 450 mm dia , sieve size 19 mm 450 mm dia , sieve size 2 point 36 mm 200 mm dia , sieve size 75 microm 200 mm dia brass , pan 200 mm dia brass , lid 200 mm dia brass , sieve shaker , bitumen extractor mannual , alv test appratus _complete set , sand replacement appratus , acrylic board 3 feet x 2 feet , digital infrared thermometer _laser beam , weigh balance electronic with 01 gram least count 5 kg capacity , electronic weigh balance 15 kg capacity , electronic weigh balance 25 kg capacity , electronic weigh balance 1 kg capacity , tempalate , core cutting machine _core dia 100 mm and diesel engine with self //bid details 2 / 45

CTN :41208739

16 Aug, 2025 4.01 Crore

Mumbai - Maharashtra

Tender For supply of three way valve control panel cooling unit , smps 240w 1/2ph 200-500vac/24vdc 10a marine dnv gl , transformer control 415/240vac 400va , hmi touch screen 7 carel w/ethp , relay with base 6mm 857-304 spdt 24 vdc , shock mount for ecp of 506kw ac plant , filter emc/rfi 8a 2ph 520/300vac hp , cb 2p 4a c curve 10kaic dr ul489 , ctrl c.pco carel - no lcd display , socket with industrial relay wago , cb 1 pole 1a c curve abb ul489 , cb 2p 3a c curve 10kaic dr ul489 , carel communication card modbus pcos004850 , electrical control panel for 506 kw ac mbc plant , abb thermo-magnetic mccb 400a t5 frame 65kaic at 480vac , expansion valve actuator , temperature gauge water line , sight glass for condenser , ball valve three way 3/ 4 letlock , special tools set , general purpose maintenance tool sets , impellors sw pump , impellors cw pump , set of bearing of cw pump , set of bearing of sw pump , charging set , communication cable between compressor and controller , set of all indication lamps , schrader valve , contactor 3rt2015-1ap01 , shock mount akcc-25i make-resistoflex for panel cooling unit , set of all gaskets , relay with base 788-516 dpdt 230 vac , emergency stop , temperature transmitter m1a1-51-lp-c-s-023-n make-intempco , sea /chiled water pump soft startr protectn fuse semicond , soft starter 3rw4047-1bb14 , contactor for sea/chilled water pump , emc fan with filter 230m 3 /h 230v 50/60hz , emc fan with filter770m 3 /h 230v 50/60hz , shock mount -pd-p5d resistoflex , relay with base 788-312 dpdt 24 vdc , thermostat , three way motorized valve gun metal 125nb , filter emc/rfi 230a 3ph 480vac hp class b , ln reactor 250a 5% 480v marcus , 250a 3p mccb 25kaic 480vac xt4frame abb , mpu for sea water pump(pump protection relay) , button push green with led lamp 2alrf3l 230v ac , button push red with led lamp 2alrf4l 230v ac , rubber expansion bellow size 125nb , gasket set of 506kw ac plant , set of all electronic cards of mbc , set of soft starters for compressor and pumps , mpu for chilled water pump(pump protection relay) , refrigeration line flange gasket set , evaporator inlet and outlet flange gasket , condenser water inlet and outlet flange gasket , compressor gasket o ring , sea water pump o ring , chilled water pump o ring , rotolck vlv o ring condnsr in out lvl guage motr coling lin , relay/ contactor set (one of each type) , pressure transmitter set (one of each type) , temp sensor and transmitter set (one of each type) , serial driver module , bmcc module , gasket set for evaporator , temperature gauge compressor suction , gasket set for condenser , plate heat exchanger cbh16-17h make-alfa laval , ball valve ss316 two way 3/ 4 , pressure gauge range for sea/ chilled water pump 0 to 10 bar , expansion tank inox pro-z8 make-zilmet , pwm module , sightglas 1 1/ 4npt male witoutindcatr clear glas for evprtr , solenoid valve coil(240v) , solenoid valve liquid line , temperature gauge compressor discharge and liquid line , temperature transmitter sea chilled water inlet/outlet temp , pressure switch high , pressure switch low , presure transmitr chilled condnsr water inlet/outlet presure , sight glass liquid line & float line , drier core for liquid line drier , vent valve /chemical cleaning valve , drain valve /angle valve , ball valve ss316l three way 1/ 4 , differential pressure gauge 0 to 2 5 bar , discharge pressure gauge compressor 1 range -1 to 24 bar , suction pressure gauge compressor 1 range -1 to 15 bar , ball valve brass three way , drier for liquid line (filter drier core - lri line) , rubber expansion bellow size 150nb for condenser , sea / chilled water flow switch , level sensor , angle valve 1/2nptx1/ 2flare compressor motor cooling line , ball vlv for liquid linebrass gbc28s 1 1/8 /54s 2 1/8 (009l7 , sight glass compressor motor cooling line , diff presure transmitter condenser evprator inlet and outlet , ball valve (liquid line ) , ball valve (stagging/mcc line)

Central Government/Public Sector

CTN :41237439

18 Aug, 2025 NA

Erode - Tamil Nadu

Tender For supply of set of oil level gauge r-2 complete for wap-7 locomotive as per clw drawing. no. 1209.01.313.016. ea ch unit consists of 04 items in 07 nos. as per 1) body, clw drawing. no. 1209.01.413.017. qty.= 01 no. per set (2) per forated thread piece, clw drawing. no. 1209.01.413.018. qty.= 01 no.per set (3) glass disc clw drawing. no. 1209.0 1.413.019. qty.= 01 no. per set (4) rubber seal, od/id/thickness = 44.5/40/2.5 mm qty. = 04 nos. per set. [ warranty pe riod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41147570

04 Aug, 2025 12.00 Lacs

Gurgaon - Haryana

Tender For providing of hiring of consultants - milestone/deliverable based - establishment of rain gauge station, automatic weather station and current meter at amba pumped storage project, maharashtra; establishment of rain gauge station, automatic weather station and cur..

corporations/Associations/Others

CTN :41155739

04 Aug, 2025 16.34 Lacs

Poladpur - Maharashtra

Tender For m and r to w/s/s/ in mahad industrial area...providing, installing, testing and commissioning automatic rain gauge stations in catchment area of savitri dam, poladpur.

Rain Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others