Latest raised access floor system Tenders | Government raised access floor system Tenders

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

CTN :40962723

07 Jul, 2025 NA

Gandhinagar - Gujarat

Tender For supply of maint store - socket outlet 2 or 3 pin 240 or 250 v 5 amp , socket 5 amp , switch socket outlet combined 2 or3 pin 250 v 5 a flush type , single pole and neutral enclosure with a two pin and earth plug and socket complete with 1 mcb sp 32 a , switch socket combination 5 or 15 a , switch socket outlet 6 pin 250 v 5 or 15 a flush type , wire flexible 1.5 sqmm , plug top 3 pin 15 amps 250 volts , led recess monting square panel 2x2 , led street light fitting 25 watt , led flood light fitting 70 watt , led flood light fitting 120 watt , led flood light fitting 150 watt , f tube led light 2 feet 20 watts , mccb 200 amp rupturing capacity 36 ka , led flood light fitting 80 watt , led flood light fitting 50 watt , led bulb 9 watt , led bulb 14 watt , led bulb 12 watt warm white 2700 or 3000k , mccb 100 a rupturing capacity 16ka , led bulb 12w , led bulb 5w , gate valve of size 20mm , modular fan regulator , wipro 18w and 1800 lumens led led bulb 18w , led panel ultra slim 36w , mcb spn 63 a , led street light fitting 45 w , led bulb 7w , mccb 63 a rupturing capacity 16ka , mcb tpn 40 to 60 a 9ka , ceiling fan 1200 nm , led recess moniting square panel 2x2 warm white philips or wipro watt , pvc insulated 2 core wire 2.5 sqmm copper conductor , mcb tpn 63 a , modular switch 5a , distribution board double door spn 4 way , pvc insulated 3 core wire 16.00 sqmm copper coductor , modular socket 15 amp , geyser 25 ltrs capacity , bell push , pvc insulated 3 core wire 10.00 sqmm copper coductor , led floor light fitting 50 watt yellow colour , switch piano 250 volts 05 amps flush type one way , ac box with mcb 20a , modular socket 5 amp , single pole and nenutral enclosure with a two pin and earth plug and socket complete with one mcb sp 20 amps , pvc insulated 2 core wire 1.5 sqmm copper coductor , non return valva of size 80mm , electric bell electronic 250 volts 120 watts , pvc insulated frls wire 1.5 sqmm copper conductor , call bell cordless type , modular switch 15a , mccb 630 amp rupturing capacity 36 ka , mccb 250 amp rupturing capacity 36 ka , plug top 3 pin 05 amps 250 volts , modular bell push , fan regulator electronic step type 100 watts 250 volts , cona piano type socket 6a and 16a 6 pin socket socket 16 amp , mccb 400 amp rupturing capacity 36 ka , distribution board vertical double door tpn 4 way , change over switch 200 amp

CTN :40968047

19 Jul, 2025 35.35 Crore

Multi City - Multi State

Tender For design and construction of ug and pg hostel g plus 3 floors for girls of 500 capacity and dining hall ground floor for central university of karnataka at kalaburagi, karnataka including internal water supply, sanitary installations, drainage, overhead terrace tanks, rain water harvesting, internal electrical installations, lightning conductor, firefighting system, lifts, solar water heating system, lt panel, street lighting and development of site, bulk services including internal roads, paths, storm water drains and sewerage lines etc. all complete on engineering, procurement and construction epc basis.

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830502

16 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

CTN :40935640

18 Jul, 2025 34.98 Crore

Multi City - Multi State

Tender For design and construction of ug and pg hostel g plus 3 floors for boys of 500 capacity and dining hall ground floor for central university of karnataka at kalaburagi, karnataka including internal water supply, sanitary installations, drainage, overhead terrace tanks, rain water harvesting, internal electrical installations, lightning conductor, firefighting system, lifts, solar water heating system, lt panel, street lighting and development of site, bulk services including internal roads, paths, storm water drains and sewerage lines etc. all complete on engineering, procurement and construction epc basis.

Central Government/Public Sector

CTN :40702978

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of re- wiring, cabeling, conduting including db with main line termination for the entire office , installation of concealed lights fittings like spots , panel lights , led strip lights etc. for the entire office. , providing and fixing gypsum ceiling on gyprox gypsum channel with necessary tapes and joint filling. , light gala cutting , grooving where needed in whole office , providing and fixing pop wall punning wherever needed , providing and applying paint on ceiling , providing and applying wall paint , polishing of door and entire office wherever needed , breaking of existing glass partition walls , providing and making brick wall with near saminar hall , providing and making brick wall with technology arena wall , providing and making brick wall with media area wall , floor protection sheet for the entire office to cover existing flooring during execution of work on site , rabbit waste removing , deep cleaning of the office , providing and fixing of door finished in laminate , refurbishing of passage entrance door , providing and fixing of story wall as per design , providing and fixing of ceiling paneling as per design , providing and fixing of partition wall finished in laminate and panel as per design , providing and making of staircase ramp for seating , providing and fixing of side storage unit finished in laminate , providing and fixing back wall paneling finished in laminate as per design , providing and fixing pc unit finished in laminate as per design , providing and fixing led screen wall partition wall , providing and fixing wall paneling wall finished in fabric , providing and fixing window partition wall as per design , providing and fixing passage area partition wall as per design , providing and fixing wall partition for display pods as per design , carpet for whole area

Central Government And Public Sector

CTN :40922373

14 Jul, 2025 15.45 Lacs

Bangalore - Karnataka

Tender For supply of supply of indoor floor mounted metal clad 630a 11kv ht panel with 3 nos vcbs , installation testing and commissioning of the above ht panel , supplying and laying 3c 95sqmm pvc insulated pvc sheathed 11 kv xlpe power cable , supplying and making indoor cable end termination for 3c 70 or 95 sqmm 11 kv cable , supplying and making indoor cable end termination for 3c 240 sqmm 11 kv cable , providing and fixing 25mm width 5mm thick gi strip on surface

CTN :40923727

10 Jul, 2025 9.44 Lacs

Koppal - Karnataka

Tender For sindogi anganavadi building - sinda providing and fixing water closet squatting pan, sinda providing and laying ceramic glazed floor tiles of size 300x300 mm, sinda providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick, sinda providing and laying vitrified tiles in different size of tile 600mmx600mm, sinda painting with synthetic enamel paint of approved brand, sinda finishing walls with acrylic smooth exterior paint , sinda wall painting with acrylic emulsion paint of approved brand, sinda providing and fixing m s grills, sinda providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered upvc matching to ral-9016 sections , sinda providing and fixing wpc wood polymercomposite solid plain flush door shutter of required size, sinda providing and fixing factory made single extruded wpc wood polymer composite solid door, sinda providing and fixing flush door shutter made out of solid core block board, sinda providing salwood frames of doors, sindamason class i with tools, sinda burnt bricks class 35 non modular, sinda binding wire, sinda tmt bars fe 500, sindajungle wood runners and planks, sindacasurina poles 100 - 150 mm, sinda silver oak or equivalent planks 38 mm thick, sindahom of vibrator 0.71 days, sinda plasticizer super plasticizer, sinda size stone 20 x 20 x 25 cms, sinda boulders, sinda mixer (concrete small used in culvert), sinda bond stone 20 x 20 x 45 cm, sinda rubble stones, sinda mixer concrete 1 cum capacity, sinda portland cement, sinda broken stone aggregate 12 mm to 10 mm size, sinda broken stone aggregate 20 mm size, sinda broken stone aggregate 40 mm size, sinda add watering charges at 1 percent on material, sindacoarse sand zone iii, sindagranite/trap broken metal 100 mm and down size

Raised Access Floor System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector