Latest rcc block Tenders | Government rcc block Tenders

CTN :41276004

21 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of sifcon prefabricated interlocking rcc block

CTN :41275585

11 Aug, 2025 NA

East Sikkim - Sikkim

Tender For supply of weigh balances electronic type 5-20 kg capacity accuracy 1 gm , weigh balances electric type 500 capacity accuracy 0 point 01 gm , weigh balances electronic 5 kg capacity accuracy 0 point 5 gm , big size oven electrically operated thermostatically controlled , sieves 450 mm internal dia of sieve sets as per bis , sieves 200 mm internal dia consisting of sieve set of required sieve sizes , sieve shaker capable of shaking 200 mm and 450 mm dia sieves , stop watches 1/5 sec accuracy , comprising beakers (capacity 1000 ml) (glassware) , pipettes (capacity 50 ml) (glassware) , dishes (100 mm dia) (glassware) , glass measuring cylinders 200ml capacity , glass measuring cylinders 500ml capacity , glass measuring cylinders 1000ml capacity , glass rods and funnels (200 mm & 200ml) , glass thermometers range 0 c to 100 c (100 c) , metallic thermometers range up to 300c (300c) , hot plates 200 mm dia (1500 watt) voltage 220v to 230v , enamel tray 600 mm x 450 mm x 50 mm , enamel tray 450 mm x 300 mm x 40 mm , enamel tray 300 mm x 250 mm x 40 mm , enamel tray 150mm x 150mm x 30 mm , enamel tray 200mm x 200mm x 30 mm , enamel tray 350mm x 300mm x 40mm , circular plates of 250 mm dia , water testing kit , density hydrometer 700-750 gm/ml capacity , density hydrometer 750-800 gm/ml capacity , density hydrometer 800-850 gm/ml capacity , digital vernier calipers (accuracy 0 point 001 mm) , standard pycnometer of 50 ml capacity for specific gravity , sampling pipettes fitted with pressure and suction inlets 10 ml capacity , sampling tins with lids 100 mm dia x 75 mm ht (steel) , unconfined compression test apparatus is2720 part 10 , rapid moisture meter is12175 1987 , direct shear strength apparatus is2720 part 13 , constant temperature bath for accommodating bitumen test (big size) , bitumen laboratory mixer including required accessories (20 ltrs) , furol viscometer , refrigerated ductility testing machine with processor based temperature , distant reading thermometer , automatic asphalt content meter , sand equivalent test apparatus , bitumen digital thermometers laser point gun 0 c to 300 c , flash and fire point apparatus , water still ( 20 ltr capacity) , 150 mm x 300 mm ht cylinder moulds with caping component , high frequency mortar cube vibrator for cement testing , concrete mixer power driven drum size-dia 600 mm x 350 mm depth , variable frequency and amplitude vibrating table size 1 m x 1 m , los- angeles abrasion test apparatus as per is2386 (part-4) 1963 , needle vibrator length 3m and 35mm dia type pistol grip drill , 0 point 5 cft & cylinder for checking bulk density of aggregate with tamping rod , 1 cft & cylinder for checking bulk density of aggregate with tamping rod , rebound concrete test hammer , concrete thickness gauge , ultrasonic pulse velocity tester , electronic digital micrometer , infrared type k thermometer , is sieve 50 mm 31 point 5mm 25mm 16mm 6 point 3mm each 3 nos , is sieve 450mic and 850 mic each 1 nos , metal cylinder as per is 2386 for checking bulk density (3 ltr capacity) , metal cylinder as per is 2386 for checking bulk density (15 ltr capacity) , metal cylinder as per is 2386 for checking bulk density (30 ltr capacity) , accelerated curing tank having capacity to accommodate 06/12/18 concrete cubes , weight machine 30 kg (electronic type) , compressive strength testing machine of 2000kn capacity with additional dial , water bath , ring and ball apparatus , ductility apparatus , casagrande apparatus (liquid limit device with astm groving tools) , benzene , is sieves brass 4 point 75 mm 2 point 36mm 1 point 18mm each 1 nos , is sieves brass 600mic 425mic 180mic 90mic each 1 nos , is sieves brass 150mic 75mic each 4 nos , bitumen extractor electrically operated , weighing machine 0 kg to 10 kgs , weighing machine 0 kg to 25 kgs , atterberg apparatus , oven laboratory , cbr apparatus , g.i. sieve 450mm dia- 63 mm 50mm 25mm 20mm 16mm 12mm10mm 6 point 3mm each 3 nos , brass sieve 200 m

CTN :41233927

07 Aug, 2025 1.40 Crore

Baramulla - Jammu And Kashmir

Tender For permanent defence pd rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocking hollow block 25 mm thick , hdpe laminated sand bag of size 75x40 cm , shs 6 mm thick size 120x120mm x 2.4m long for column with holes , ismb 150 rsj 150 x 75 mm g1 3050 mtr long for beam , ismb 150 rsj 150 x 75 mm g2 2.20 mtr long for beam 2 , ismb 125 rsj 125 x 70mm g3 0.40 mtr long for beam , 6 mm thick ms base plate of size 150x150mm for shs column , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet , ms hexagonal nuts. bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg rm black in colour , red oxide primer conforming to relevant is , synthetic enamel paint colour green , thinner sample to be approved before supply , dry distemper sample to be approved before supply , chalk whiting sample to be approved before supply , paint brush 4 inch , pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick , supply of swivel bullet proof glass glass 610mm x300mmx 72 mm thick , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick for pcc form work. , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , sifcon pre fabricated interlocking rcc blocks. , aggregate 20mm. , natural manufactured sand , aggregate 40mm , rapidite conforming to is 1344 2018 make acclerex cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

CTN :41192829

12 Aug, 2025 2.27 Lacs

Srinagar - Jammu And Kashmir

Tender For construction of 2 side rcc block with chanelling fencing around graveyard at hamampora khumani chowk bemina near masjid sharief at hamampora near h/o mohd jaffer dar

CTN :41196160

04 Aug, 2025 10.41 Lacs

Multi City - Karnataka

Tender For material supply for construction of womens self-help group sanjivini building at kattemalavadi village in hunsur tq under mnrega scheme - kmvadi-bib cock 20mm nominal bore, kmvadi-fabrication charges., kmvadi-cost of 6.5mm m.s. coil, kmvadi-transportation charges of materials beyond 5 km at 10%, kmvadi-add cement sand and grit 1% on material, kmvadi-plumber, kmvadi-add, kmvadi-polyethylene pipes high density 32 mm dia external dia, kmvadi-stone aggregate single size 10 mm nominal size, kmvadi-stone aggregate single size 20 mm nominal size, kmvadi-pvc pipe of 6kg / cum,90 mm, kmvadi-cost of centering at 1% on material, kmvadi-c.i manhole cover with frame, kmvadi-table moulded bricks of class designation 50( non modular ), kmvadi-granite metal 40 mm, kmvadi-foreman grade 1, kmvadi-handling loading and unloading 3% on material, kmvadi-labour charges for lifting and placing in position and making connection at 7% on material, kmvadi-polyenthylene water storage tank of specified capacity l, kmvadi-aluminium paint, kmvadi-add brush, putty, sand paper, roller at 5% on cost of paint, kmvadi-enamel paint, kmvadi-add brush, putty, sand paper at 5% on cost of paint, kmvadi-enamel primer, kmvadi-add brush, putty, sand paper at 2% on cost of paint, kmvadi-water proofing cement paint, kmvadi-add brush, putty, glue at 5% on cost of paint, kmvadi-whitening, kmvadi-dry distemper, kmvadi-transportation loading and unloading at1% on material, kmvadi-tools and plants at2% on material, kmvadi-hom of cutting and grinding machine1, kmvadi-hom of welding and grinding machine, kmvadi-mechanic class ii/mechanic hmp grade i/eme grade, kmvadi-anticorrosive bitumastic paint, kmvadi-12x12 m.s square rod, kmvadi-20 mm x20mm vertical m.s square rod, kmvadi-50 mm dia ms hollow pipe b class 14 gauge, kmvadi-add brush at 1% on cost of paint, kmvadi-enamel metal paint, kmvadi-add hom of welding and grinding machine at 4% on material, kmvadi-welder grade i, kmvadi-ms flat, kmvadi-m.s rods, kmvadi-fabricator, kmvadi-5.50 mm thick plain glass, kmvadi-chrominum plated screws, kmvadi-cleat angles, kmvadi-alluminium handles - 15 mm, kmvadi-alluminium tower bolt - 20 cm, kmvadi-pvc beading, kmvadi-rubber beading for shutters beading, kmvadi-nylon rollers, kmvadi-powder coated 60-70 micron, kmvadi-unit cost as per the specification, kmvadi-honnewood planks for panels 20 mm thick, kmvadi-honne wood, kmvadi-hom of machinaries for planing, kmvadi-add cutting and other wastage 5%, kmvadi-mathi/nandi wood planks for panels 25 mm thick, kmvadi-painter class i, kmvadi-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, kmvadi-ready mix primer paint (ready mix red lead paint), kmvadi-locking arrangements at 1% on a, kmvadi-add hom of welding and grinding machine at 2% on material, kmvadi-fitter class i, kmvadi-hooks, kmvadi-ms cleats with bolts and nuts to rest on pile, kmvadi-pintels including welded pins, kmvadi-angle iron 40x40x6mm, kmvadi-gusset plates 3.15 mm thick, kmvadi-ms sheet 1 mm thick, kmvadi-broken granite metal 20 mm, kmvadi-add white cement for pointing at 2% on material, kmvadi-add handling , loading and unloading at 2% on material, kmvadi-border tiles 30 x 10 cms, kmvadi-glazed tiles 300x450, kmvadi-white cement, kmvadi-ceramic tiles of size 30 x 30 cms, kmvadi-vitrified tiles 600x600 mm, kmvadi-add providing and removing scaffolding at 3% on labour, kmvadi-add sundries charges at 2 % on material, kmvadi-add handling , loading and unloading at 1% on material, kmvadi-casurina poles 100 - 150 mm, kmvadi-brick, kmvadi-add watering charges at 1 % on labour, kmvadi-stone chistler class ii, kmvadi-mason class ii (with tools), kmvadi-mixer (concrete small used in culvert), kmvadi-boulders, kmvadi-bond stone 20 x 20 x 45 cm, kmvadi-size stone 20 x 20 x 25 cms, kmvadi-binding wire, kmvadi-tmt bars fe 500, kmvadi-add formwork at 4% out of material and labour, kmvadi-add formwork and staging at 20% for height upto 5 m, kmvadi-concrete mixer 0.4/0.

CTN :41166621

29 Jul, 2025 3.66 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/06 - puran shah to farkiya hat (harijan tola), clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and

CTN :41166628

29 Jul, 2025 30.03 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/01 - pakka road to adiwasi tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, ro

CTN :41166610

29 Jul, 2025 25.77 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/03 - pmgsy path diyari to harijan tola diyari via sarpanch tola naya tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, excavation in soil using hydraulic excavator and tippers with disposal upto 1000 mexcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3, construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight s

CTN :41166619

29 Jul, 2025 35.91 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/04 - bishu baba sthan(hanuman mandir ) to adiasi tola karwa rahika, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the requ

CTN :41166613

29 Jul, 2025 6.58 Crore

Purnea - Bihar

Tender For rrsmp/25-26 purnea/02 - repair of road from jalalgarh railway gumti to mahiyarpur via chauhan tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wmm(wet mix macadam)providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., cement concrete/panel concrete pavementconstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383 as per actual design mix, processing 28 days minimum compressive strength of 35 (thirty five) mpa and minimum flexural strength of 4.5 (four point five) mpa, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, constructi

Rcc Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors