Latest rcc boundary wall Tenders | Government rcc boundary wall Tenders

State Government

CTN :39906960

10 Apr, 2025 18.48 Lacs

Solan - Himachal Pradesh

Tender For formation deficiency in km. 2/227.70 to 2/276.20, construction of r/wall 0/570 to 0/601.50, edge wall in km. 0/570 to 0/675, b/wall in km. 1/360 to 1/384.30, 1/810 to 1/859, 2/235 to 2/276.20

State Government

CTN :39900222

11 Apr, 2025 42.37 Lacs

Ernakulam - Kerala

Tender For general-sr-2024-25 - urgent reconstruction of damaged protection wall and edge of road in iqbal road at ch. 0/800 rhs urgent reconstruction of damaged protection wall and edge of road at iqbal road ch. 0/800 rhs

State Government

CTN :39415260

07 Apr, 2025 NA

Hooghly - West Bengal

Tender For corrigendum : supply of different materials furnitures and glow shine acp board with steel edge letter at office of the assistant engineer, chandannagar sub division, p.h.e. dte. - supply & delivery of steel chairs, including arm rest with steel frame with cushion seat back for visitors as per direction of e.i.c., supply, design and making installation of letter of stainless steel material with 1-2mm thickness laser cutting with 0.5 micron golden coating mirror finish polish, over the plyboard wall panelling as per direction of eic., supply & delivery including design and manufacturing of notice board with acrylic pasted vinyl letter as per direction of eic., supply & delivery at site including design and manufacturing of aluminium composite panel [acp 3mm aludecor exterior al-33] led board with 25mm imported acrylic pasted vinyl letter with stainless steel side edging as per following subject:- with one side glassing alluminium tube of size 2.5" x 1.5" x 1.5mm with different colour led as per direction of eic. the board should have in built power circuit board connection with led lamp suitable for operating in 230 volt 50hz ac supply [size 21 x 4]a) led should be of 1.5 watt original samsung (3 years warranty) fitting led modules connected for 12v, 400 watt power (2 years guarantee)b) the board back side should have exterior acp cover and outside yellow acrylic border (if asked for) included with making of all internal electric fittings and connections complete. c) the board will supported by suitable angle structure as per direction of engineer in charge.

State Government

CTN :39869565

11 Apr, 2025 NA

Ayodhya - Uttar Pradesh

Tender For supply and installation of lab equipments in divisional lab at site office in bhoomi vikas grihesthan evam bazar yojna ayodhya - field kit for j.e s having the 3 m. steel tape, 30 m metallic tape plumb bob tri square, spirit level enamel tray 30 cmx30 cm, graduated cylinder with mixing rod, vasauli straight edge, string., briquette testing machine with moulds . it is used to measure the crushing strength of briquettes. briquette testing machine is manufactured used optimum quality components and sophisticated technology in line with industry standards. briquettes are fitted and after fixing the briquette in the jaws, the machine is switched on. the sliding weights slides over the calibrated lever thus applying tension to specimen., digital compression testing machine with computerized output. (2000 kn)(make harriss & tariss or equivalent)standard- is:14858(2000),is:516,astmc39 2000kn electrical , digital computerized compression testing machine for testing of concrete cube, concrete cylinder, concrete beam, bricks, interlocking tiles and other metallic & non-metallic components.compression testing machine is designed and manufactured as per is:14858. it meets all the latest relevant nation & international standards for compression testing machine . the load frame is made up of high-quality steel. the ram/piston diameter is 300mm. load frame is connected to a hydraulic power supply that can be operated with electricity. in case of power failure, machine can be operated with hand also.a digital display with pressure sensor and pressure guage with maximum load indication pointer is fitted on the top panel of the load on the sample . this digital display and pressure guage is calibrated as per standards with the calibration device with accuracy of +1% . digital display works on electricity and pressure guage is required/useful at the time of power failure/hand operation of machine. electric motor shall be crompton, bajaj, havells, eec or siemens make.complete system supplied with all required accessories and brick testing platen as per standard., electrically operated combined (diameter 45cm. & diameter 20cm.)sieve shaker(make-harriss & tariss or equivalent)electrically operated sieve shaker with electric motor of crompton, bajaj, eec, siemens, havells make. sieving is used for gravel as well as sand size particles and sedimentation procedures are used for finer soils. for soils containing coarse and fine soil particles , it is usual to employ both sieving and sedimentation procedures., digital balance (30kg. & l.c. 1gm.) (make-gold face or equivalent)battery operated system supplied with charge., digital balance(15 kg. & l.c. 0.5 gm.)(make-gold face or equivalent)battery operated system supplied with charge, oven(make-harriss & tariss or equivalent)(size-45cm.x45cm.x45cm.) (digital) 2500 covens uses dry heat to sterilize and are used to perform effect of ageing on materials. ht ovens are manufactured with different interior material. the ovens are of double walled construction . outer wall is of mild steel, internal chamber is available in mild steel or aluminium or stainless steel. ovens are well insulated with glass wool. the heating is from bottom heaters made of nichrome wire and temperature is accurately controlled within +2 c thermostatically., metallic cube moulds (cast-iron)size-15cm.x15cm.x15cm. made as per isisi marked cube mould 15x15x15cm made as per is 10086. moulds are made of high-quality metal, and are strong enough to resist distortion and retain their shape and size under rugged conditions. these moulds are given internal surface finish of very high quality as per is:10086. the design is such that during dismantling and reassembly, these moulds attain accuracy of alignment., metallic cube moulds (cast-iron)size-5cm.x5cm.x5cm. made as per isisi marked cube mould 5x5x5cm made as per is 10086. moulds are made of high-quality metal, and are strong enough to resist distortion and retai

CTN :39572008

03 Apr, 2025 NA

Jaisalmer - Rajasthan

Tender For tender for supply of led wall mounted decorative light fitting with provision two bulb , led wall mounted decorative light fitting with provision one bulb , bathroom glass shelf 2 feet long , corner glass shelf 300mm , corner glass shelf 500x125mm , kitec female tee connector 12.7 mm , kitec elbow connector 12.7 mm , kitec connector 12.7 mm , kitec pipe 12.7 mm , mild steel wire nails 1.4 mm , ss bow handle 100mm , ss bow handle 125mm , peg set of 6 , plate rack stainless steel 1245mmx915mmx405mm , toilet paper holder , white cement , stainless steel 304 grade finished handles 200 mm , stainless steel 304 grade finished butt hinges 125mm , stainless steel 304 grade finished tower bolt 200mm long , stainless steel 304 grade finished sliding door bolt aldrop 16 x 300mm , stainless steel 304 grade finished floor door stooper , screw 35 x 8 mm , self screw 32 x 8 mm , 3mm thick fibre-reinforced plastic sheet of transparent colour , ply wood 8x4x6 mm , edge bending tape 1 mm thick for 18 mm hdhmr board , edge bending tape 1 mm thick for 12 mm hdhmr board , sheet glass 3mm of 4 feet x 3 feet , glass putty , pvc pipe 110mm , pvc bend 110mm , pvc branch piece single y 110mm , pvc junction single t 110mm with eye lid , pvc reducer 110mm , pvc vent cowl 110mm , solvent of 100 ml , araldite epoxy adhesive resin and hardner , knob for dressing table cupboard , fevicol , nails without head , nails with head , cast iron cowls 75mm bore , pvc water tank 500 ltr , pvc water tank 500 ltr , pvc water tank 1000 ltr , pvc water tank 1000 ltr , pvc water tank 5000 ltr , identification sign cautionary mandatory and information sign board , epoxy resin hardener kit for fixing of cat eyes road studs , star delta starter fully automatic suitable for electric motor of capacity 20 hp

CTN :39895548

17 Apr, 2025 NA

Multi City - Multi State

Tender For (a) at kwni-protection of hill slope behind existing station building by providing gabion wall, rcc retaining wall, drain along with profiling of hill slope and other ancillary works. (b) at kwni-construction rcc retaining wall in yard from ch.25650 m to ch. 26195 m to provide a barrier against rock/earth debris coming from hill.(c) at kwni construction new station building besides existing pf-2 including circulating area, boundary wall and 650m station approach road , wall cum drain at the edge of pf-2 along with other ancillary works (d) at tunnel 14a- protection hill slope damaged due to landslides along the tunnel by providing gabion wall, rcc retaining wall, drain along with profiling of hill slope and other ancillary works.(e) other miscellaneous works like provision of 4 bay pp- shed at sang/kwni yard, cleaning of drain in tunnel and cuttings, removal of damaged drain cover from tunnel and fixing of new drain slabs, treatment of minor cracks in the various tunnels between hrtk-kwni in connection with construction of new bg railway line bairabi-sairang (mizoram).

CTN :39826523

13 May, 2025 4.52 Lacs

Shimla - Himachal Pradesh

Tender For construction of edge wall and p/l of interlocking paver blocks in tehsil road ward no. 1 near goyal washing centre municipal council sunni

CTN :39864134

01 Apr, 2025 18.34 Lacs

Bhilwara - Rajasthan

Tender For various types of work in the municipality premises - earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out , dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry,, , providing and laying in position cement concrete of specified. grade excluding the cost of centring and shuttering - all, , random rubble masonry with hard stone in foundation and. plinth: cement mortar 1:6 (1 cement: 6 coarse sand), , random rubble masonry with hard stone in superstructure above plinth level and upto two stories, , centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc., , centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc., , reinforced cement concrete work in beams, suspended. floors, roofs having slope upto 15 landings, balconies., , cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and, , steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a, , providing and laying damp-proof course with cement concrete grade m-15 (1:2:4) mortar prepared with 1%, , wall painting with plastic emulsion paint of approved brand. and manufacture to give an even shade: two or more coats, , providing and fixing granite stone slab mirror polished and. machine edge cut in walls, pillars, steps, shelves. sills, , providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades, , providing and laying in position cement concrete of specified. grade excluding the cost of centring and shuttering - all, , providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard, , providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvc/neoprene, , providing and fixing 50 mm dia g.i. steel pipe railing in 3 rows duly painted on medium weight steel channels (ismc- ??? ?????? ????? ??? ??????? ?????? ?? ?????